Shure ADX2 Bedienungsanleitung

ADX2

Handheld Transmitter

User guide for the ADX2 Axient Digital transmitter

Version: 10.3 (2023-J)

Shure Incorporated
2/26
Table of Contents
ADX2   Handheld Transmitter 4
ADX2 Handheld Transmitter 4
Features 4
Performance 4
Design 4
Power 4
Included Components 4
Choice of (1) of the following Shure microphone car
tridges: 5
Optional Accessories 5
Optional Shure microphone cartridges: 5
ADX2 Transmitter Overview 6
Transmitter Controls 7
Home Screen Display 7
Locking the Interface 8
Shure Rechargeable Batteries 8
Checking Battery Info 9
Important Tips for Care and Storage of Shure Recharge
able Batteries 9
Battery Installation 10
ADX2 SB920A Battery Runtime 10
Installing the Battery Contact Cover 10
Menu Parameters 10
Tips for Editing Menu Parameters 11
Menu Map 11
Menu Parameter Descriptions 11
Radio Menu 12
Audio Menu 12
Utilities Menu 12
IR Sync 13
Setting the Frequency Manually 14
RF Mute 14
Safe Start 15
Input Overload 15
Tone Generator 15
Matching Audio Levels with Mic Offset 16
ShowLink Test 16
Updating Firmware 17
Firmware Versions 17
Updating the Transmitter 17
Troubleshooting 17
Power 18
Gain 18
Cables 18
Interface Locks 18
Encryption Mismatch 18
Firmware Mismatch 18
Tx Battery Hot 18
Radio Frequency (RF) 18
Clean Battery Contacts 20
Specifications 20
Frequency Range and Transmitter Output Level 21
WARNING 24

Shure Incorporated

3/26

Australia Warning for Wireless 24

Certifications 25

LICENSING INFORMATION 25

Information to the user 25

Shure Incorporated

4/26

•

◦

•

ADX2

Handheld Transmitter

ADX2 Handheld Transmitter

ADX series transmitters deliver impeccable audio quality and RF performance, and are equipped with ShowLink remote con

trol for real-time parameter adjustments and interference avoidance. This transmitter features wide tuning, High Density (HD)

mode, encryption, and advanced rechargeability in a streamlined design. Light-weight aluminum construction and SB920A

rechargeable power options (with dockable charging).

Features

Performance

184 MHz tuning range

20 Hz to 20 kHz range with flat frequency response

Automatic input staging optimizes gain setting

Diversity ShowLink-enabled for remote transmitter control and automatic interference avoidance

AES 256-bit encryption-enabled for secure transmission

>120 dB, A-weighted, System Gain @ +10

Digital output: >125dB, A-weighted (Dante, AES3, AES67)

100 meter (300 feet) line-of-sight operating range

Selectable modulation modes optimize performance for spectral efficiency or audio quality:

Standard – optimal coverage, low latency

High density – dramatic increase in max system channel count

Switchable Power Levels = 2/10/40 mW (region dependent)

Built-in tone generator and RF markers to facilitate range-testing

Design

Interchangeable Shure microphone cartridges

Backlit LCD with easy to navigate menu and controls

Rugged metal construction

Menu and power lockout

Power

Shure SB920A rechargeable batteries for up to 9 hours of runtime, precision metering, and zero memory effect

External charging contacts for docked charging

Shure Incorporated

5/26

•

Included Components

Component Part number

SB920A Shure Rechargeable Battery 95A46272

Zipper Bag 95B2313

Threaded Adapter 31B1856

Swivel Adapter, black 90F4046

Choice of (1) of the following Shure microphone cartridges:

SM58 (RPW112)

BETA 58A (RPW 118)

BETA 87A (RPW120)

BETA 87C (RPW122)

KSM8 Nickel (RPW170)

KSM8 Black (RPW174)

KSM9HS Black (RPW186)

KSM9 Black (RPW184)

KSM9 Nickel (RPW188)

KSM9HS Nickel (RPW190)

KSM11 Black (RPW192)

KSM11 Nickel (RPW194)

Optional Accessories

Accessory Part number

SB920A Shure rechargeable battery 95A46272

Battery contact cover (part number varies by frequency range) WA619-A (470-636 MHz), WA619-B

(606-810 MHz), WA619-C (750-960 MHz)

AD651B Talk Switch Button (black) 90A37347B

Microphone stand adapter WA371

Shure Networked Docking Charger 2-Up SBC240

Optional Shure microphone cartridges:

SM58 (RPW112)

SM86 (RPW114)

SM87A (RPW116)

BETA 58A (RPW118)

BETA 87A (RPW120)

BETA 87C (RPW122)

VP68 (RPW124)

Shure Incorporated

6/26

KSM9 Nickel (RPW188)

KSM9HS Nickel (RPW190)

KSM9 Black (RPW184)

KSM9HS Black (RPW186)

KSM11 Black (RPW192)

KSM11 Nickel (RPW194)

ADX2 Transmitter Overview

①Microphone Cartridge

See Optional Accessories for a list of compatible cartridges.

②Display

View menu screens and settings. Press any control button to activate the backlight.

③Infrared (IR) Port

Align with the receiver IR port during an IR Sync for automated transmitter programming.

④Control Buttons

Use to navigate through parameter menus and change values.

⑤Battery Compartment

Requires Shure rechargeable battery.

⑥On/Off Switch

Powers the unit on or off.

⑦Handle

Unscrew to access controls and batteries.

⑧Battery Charging Contacts

Charging contacts for use with docking battery chargers.

Shure Incorporated

7/26

•

Transmitter Controls

Use to navigate through parameter menus and change values.

Control Description

XActs as a 'back' button to return to previous menus or parameters without confirming a value change

OEnters menu screens and confirms parameter changes

∨∧ Use to scroll through menu screens and to change parameter values

Tip: Use the following shortcuts for quick setup:

Hold the ∧button while powering on to lock or unlock the transmitter controls.

Hold the X button while powering on to enter the safe start menu.

Home Screen Display

The home screen shows transmitter information and status.

Shure Incorporated

8/26

•

◦

There are four pieces of information that you can choose to see on the home screen. Use the arrow buttons to select one of

the following choices:

Name

Frequency Setting

Group (G) and Channel (C)

Device ID

The following icons indicate transmitter settings:

Icon Setting

Battery runtime in hours and minutes or bar display

Key: Displayed when encryption is enabled

Lock: Displayed when controls are locked. Icon will flash if

access is attempted to a locked control (power or menu).

ShowLink signal strength displays 0 to 5 bars

STD: Standard Transmission Mode

HD: High Density Transmission Mode

RF Mute Engaged: Displayed when RF output is muted

Locking the Interface

Lock transmitter interface controls to prevent accidental or unauthorized changes to parameters. The lock icon appears on the

home screen when the interface lock is enabled.

From the Utilities menu, navigate to Locks and select one of the following lock options:

None: The controls are unlocked

Power: The power switch is locked

Menu: The menu parameters are locked

All: The power switch and menu parameters are locked

Press O to save.

To quickly unlock a transmitter: Press O twice, select None, and press O.

Shure Rechargeable Batteries

Shure lithium-ion batteries offer a rechargeable option for powering the transmitters. Batteries quickly charge to 50% capacity

in one hour and reach full charge within three hours.

Shure Incorporated

9/26

•

Single chargers and multiple bay chargers are available to recharge the Shure batteries.

Caution: Only charge Shure rechargeable batteries with a Shure battery charger.

Checking Battery Info

When using a Shure rechargeable battery, the receiver and transmitter home screens display the number of hours and minutes

remaining.

Detailed information for the battery is displayed Battery menu of the transmitter: Utilities > Battery

Battery: The chemistry type of for the installed battery (Shure, Alkaline, Lithium, NiMH)

Bars: Indicates the number of bars displayed

Time: Battery runtime

Charge: Percentage of charge capacity

Health: Percentage of current battery health

Cycle Count: Total of the number of charging cycles for the installed battery

Temperature: Battery temperature reported in Celsius and Fahrenheit

Important Tips for Care and Storage of Shure Rechargeable Batteries

Proper care and storage of Shure batteries results in reliable performance and ensures a long lifetime.

Always store batteries and transmitters at room temperature

Ideally, batteries should be charged to approximately 40% of capacity for long-term storage

Regularly clean the battery contacts (at least every 6 months) with an electrical contact cleaner designed for gold contacts

and safe on plastics

During storage, check batteries every 6 months and recharge to 40% of capacity as needed

For additional rechargeable battery information, visit www.shure.com.

Shure Incorporated

10/26

Battery Installation

①Accessing the Battery Compartment

Unscrew and remove the handle as shown.

②Inserting the Battery

Insert the battery, contracts first into the battery compartment. Press down on the tab to fully seat the battery, and then rein

stall the handle.

Tip: To remove the battery, pull up on the tab on the bottom of the battery.

ADX2 SB920A Battery Runtime

Note: Higher RF power levels decrease battery runtime. Battery runtime varies with battery age and environmental conditions.

2 mW 10 mW 40 mW

11.0 to 12.0 hours 9.0 to 11.0 hours 6.0 to 8.0 hours

Note: A Battery Hot warning indicates that transmitter battery needs to cool off. Otherwise, the transmitter will shut down. Let

the device cool down and then consider swapping the transmitter battery to continue operation.

Identify any possible external heat sources to the transmitter and operate the transmitter away from those external heat

sources.

All batteries should be stored and operated away from external heat sources in reasonable temperature conditions for best

performance.

Installing the Battery Contact Cover

Use battery contact covers to prevent reflections from the battery contacts during broadcasts or live performances.

Andere Handbücher für ADX2

Inhaltsverzeichnis

Andere Shure Sender Handbücher

Shure

Shure P4T Bedienungsanleitung

Shure

Shure AXIENT DIGITAL ADX2FD Bedienungsanleitung

Shure

Shure ULXD6 Bedienungsanleitung

Shure

Shure P4T Bedienungsanleitung

Shure

Shure Axient Bedienungsanleitung

Shure

Shure AD2 Bedienungsanleitung

Shure

Shure AXIENT AXT100 Bedienungsanleitung

Shure

Shure T2 Bedienungsanleitung

Shure

Shure AD2 Bedienungsanleitung

Shure

Shure DT 6008 Bedienungsanleitung

Shure

Shure AD3 Bedienungsanleitung

Shure

Shure Axient Digital ADX1 Bedienungsanleitung

Shure

Shure P4T Bedienungsanleitung

Shure

Shure AD1 Bedienungsanleitung

Shure

Shure ULXD6 Bedienungsanleitung

Shure

Shure AXIENT AXT100 Bedienungsanleitung

Shure

Shure UR3 Bedienungsanleitung

Shure

Shure ADX1-G56 Bedienungsanleitung

Shure

Shure Axient Digital ADX1 Bedienungsanleitung

Shure

Shure ULXD6-8 Bedienungsanleitung

Shure

Shure ULXD6 Bedienungsanleitung

Shure

Shure AD1 Bedienungsanleitung

Shure

Shure AD2 Bedienungsanleitung

Shure

Shure UC1L Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung