Shuttle AB49 Bedienungsanleitung
AB49 & AB49N
Intel Pentium 4/Celeron
478-pinProcessor
with 400/533 MHz FSB
Based DDR MAINBOARD
User's Manual
M784
Shuttle®AB49 & AB49N
Intel Pentium 4/Celeron
478-pin Processor
with 400/533 MHz FSB
Based DDR Mainboard
Manual Version 1.0
Copyright
Copyright©2003 by Shuttle®Inc. All Rights Reserved.
This publication, including all photos, illustrations, and software, is protected under interna-
tional copyright laws, with all rights reserved. Reproducing any of the material contained
herein is prohibited without the consent of the publisher.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
Intel, Pentium, and Celeron are registered trademarks of Intel Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other product names used in this manual are ascribed to their respective
owners and acknowledged.
Statement of Shuttle Mainboard via the EMI Test
Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/
CISPR22/AS/NZS3548ClassB,EN55024(1998/AS/NZS),EN4252.1(1994),EN61000,ANSI
C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-
trated as follows:
(A)Voltage:AC110V/60HZ &AC230V/50HZ
(B) Tested Product Information:
Product Name: PC Mainboard
Status: Sample
ModelName:AB49N/AB49
S/N:N/A
CPU:
External Frequency: 100 MHz
IntelPentiumIV1.6/1.8/2.0/2.2/2.4GHz
External Frequency: 133 MHz
IntelPentiumIV2.26/2.40/2.53/2.66/2.80/3.06GHz
Mouse Port: one port with 6 pins
Keyboard Port: one port with 6 pins
Parallel Port: one port with 25 pins
Serial Port: one port with 9 pins
USB Port: four ports with 4 pins respectively
LANPort: one port with 8 pins (10Mbps/100Mbps)(AB49N Only)
Line-In & Line-Out & Mic-In Ports: one port for each
DDR Memory: 256 MB*2
All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy:N/A
EMIInterference:
Crystal:25.00MHz(X1)/24.576MHz(X2)/32.768KHz(X3)/14.318MHz(X4)
Clock Generator: CLK1
(D) Difference betweenAB49NandAB49:
To discriminate AB49N from AB49 lies in the extent that chips inAB49N support LAN, and the
combination for testing is based onAB49N.
Test Mode
1
2
3
4
External Frequency
133 MHz
133 MHz
100 MHz
100 MHz
CPU
P4 3.06 GHz
P4 3.06 GHz
P4 2.4 GHz
P4 2.4 GHz
Case Open/Closed
Closed
Open
Closed
Open
Power Supply
ENP-0730(ATX12V)
ENP-0730(ATX12V)
ENP-0730(ATX12V)
ENP-0730(ATX12V)
(E) Supported Host Peripherals:
(F) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI orAGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
Host Peripheral Product Name Model Name S/N FCC ID
#1 Case KF45A N/A
#2 Power Supply (300W) ENP-0730 (ATX12V) 1000002885
#3 IBM HDD (30.7GB) 91024UB YKFY7981 3892I168
#4 MITSUMI FDD D353M
#5 SONY VCD Player CDU4811 3892A291
#6 AGP Card Winfast Geforce 2 MX 3892C520
#7 Power Cable Detachable and Shielded
- 1 -
WHAT'S IN THE MANUAL.................................................................... 5
Quick Reference............................................................................................... 5
About This Manual ........................................................................................... 5
1 INTRODUCTION................................................................................ 6
1.1 TO DIFFERENT USERS ............................................................................. 6
FIRST-TIMEDIYSYSTEMBUILDER............................................................ 6
EXPERIENCEDDIYUSER ......................................................................... 6
SYSTEMINTEGRATOR............................................................................... 6
1.2 ITEM CHECKLIST....................................................................................... 7
2 FEATURES ........................................................................................ 8
2.1 SPECIFICATIONS ....................................................................................... 8
3 HARDWARE INSTALLATION.......................................................... 11
3.1 STEP BY STEP INSTALLATION................................................................11
STEP1 Installthe CPU.......................................................................... 12
STEP 2 Set Jumpers............................................................................. 13
STEP3 InstallDDR SDRAMSystem Memory........................................ 13
STEP 4InstallInternal PeripheralsinSystem Case ................................ 14
STEP5 Mountthe Mainboardon theComputer Chassis........................ 15
STEP6 ConnectFront PanelLEDs/Switches/USB................................ 16
STEP 7 Connect IDE and Floppy Disk Drives........................................ 17
STEP8Connect OtherInternalPeripherals............................................ 18
STEP9 Connectthe PowerSupplies .................................................... 19
STEP10 InstallAdd-on Cards inExpansion Slots .................................. 19
STEP11 ConnectExternalPeripherals toBack-Panel........................... 20
STEP12 InstallDrivers &SoftwareComponents ................................... 21
TABLE OF CONTENTS
- 2 -
3.2 JUMPER SETTINGS ................................................................................. 22
JUMPERS& CONNECTORSGUIDE.................................................... 23
Jumpers
Clear CMOS Setting (JP1) ................................................................... 25
BIOSFlash ProtectionSetting (JP2) ...................................................... 25
Back-Panel Connectors
PS/2Mouse &PS/2 KeyboardConnectors............................................ 26
ParallelPortConnector.......................................................................... 26
COM1Port Connector ........................................................................... 26
USB1/2/3/4PortConnectors ................................................................. 26
LANPort Connector(AB49N Only) ........................................................ 27
Line-In(6-ChannelRear-Out)Port Connector ......................................... 27
Line-Out(6-ChannelFront-Out)Port Connector...................................... 27
Mic-In(6-ChannelCenter/Bass-Out)Port Connector .............................. 27
Front-Panel Connectors
HDD LED Connector (HDLED) ............................................................. 28
HardwareResetConnector (HWRST).................................................... 28
GreenLED Connector (GRNLED) ......................................................... 29
ATXPowerOn/Off SwitchConnector(PWRSW).................................... 29
ExtendedUSB Header (USB3).............................................................. 30
FrontPanelMicrophone andLine-OutHeader(AUDIO1) ....................... 30
Internal Peripheral Connectors
Enhanced IDEand FloppyConnectors (IDE1/IDE2& FDD1) ................. 31
Other Connectors
ATXPower SupplyConnectors (ATX1/ATX12V).................................... 32
CPU,Power, andChassis FanConnectors (CPUFAN1/PWRFAN1/
CASFAN1)............................................................................................ 33
- 3 -
AudioCD_INConnectors (CDIN1/CDIN2) ............................................. 33
IRHeader(IR1)...................................................................................... 34
3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 35
1.INSTALLMEMORY ............................................................................ 35
2.UPGRADEMEMORY ........................................................................ 35
4 SOFTWARE UTILITY ......................................................................36
4.1 Mainboard CD Overview ......................................................................... 36
4.2 Install Mainboard Software ..................................................................... 37
4.2.A Install Intel Chipset Driver .................................................................... 38
4.2.B Install Intel Ultra ATADriver ................................................................. 39
4.2.C Install USB 2.0 Driver ........................................................................... 40
4.2.D Install Audio Driver ............................................................................... 41
4.2.E Install LAN Driver (AB49N Only) .......................................................... 42
4.3 View the User's Manual........................................................................... 42
5 BIOS SETUP ................................................................................... 43
5.1 ENTER BIOS ............................................................................................. 43
5.2 THE MAIN MENU ...................................................................................... 44
STANDARD CMOS FEATURES ............................................................... 46
ADVANCED BIOS FEATURES................................................................. 48
ADVANCED CHIPSET FEATURES .......................................................... 51
INTEGRATEDPERIPHERALS .................................................................. 53
POWERMANAGEMENT SETUP.............................................................. 56
PNP/PCICONFIGURATIONS .................................................................... 60
PCHEALTH STATUS................................................................................ 61
FREQUENCY/VOLTAGECONTROL......................................................... 62
LOAD FAIL-SAFE DEFAULTS .................................................................. 63
- 4 -
LOADOPTIMIZEDDEFAULTS ................................................................. 63
SETSUPERVISOR/USER PASSWORD................................................... 64
SAVE & EXIT SETUP................................................................................ 65
EXITWITHOUTSAVING ............................................................................ 65
- 5 -
Quick Reference
Hardware Installation >> Step-by-Step ................................................ Page 11
Jumper Settings >> A Closer Look.......................................................Page 22
Drivers/Software Utilities >> How to Install .........................................Page 36
BIOS Setup >> How to Configure.........................................................Page 43
About This Manual
For First-Time DIY System Builder.........................................................Page 6
For Experienced DIY User ......................................................................Page 6
For System Integrator .............................................................................Page 6
WHAT'S IN THE MANUAL
- 6 -
1INTRODUCTION
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as diffi-
cult as you may think. To make your first computer DIY experience successful,
right from the start, we have designed the 3.1 Hardware Installation section
in a step-by-step fashion for all the first-time DIY system builders. Prior to instal-
lation, we also suggest you to read the whole manual carefully to gain a com-
plete understanding of your new Shuttle AB49/AB49N mainboard.
Experienced DIY User
Congratulate on your purchase of the Shuttle AB49/AB49N mainboard. You
will find that installing your new Shuttle AB49/AB49N mainboard is just easy.
Bundled with an array of onboard functions, the highly-integrated AB49/AB49N
mainboard provides you with a total solution to build the most stable and reli-
able system. Refer to sections 3.2 Jumper Settings and Chapter 4 Drivers/
Software Utilities to find out how to get the best out of your new mainboard.
Chapter 5 BIOS Setup also contains the relevant information on how to tune
up your system to achieve higher performance.
System Integrator
You have wisely chosen Shuttle AB49/AB49N to construct your system.
Shuttle AB49/AB49N incorporates all the state-of-the-art technology of the
845PE (GMCH) chipset from Intel. It integrates the most advanced functions
you can find to date in a compact ATX board.
This manual is all-purpose for two kinds of mainboards: AB49 and
AB49N. The main difference between them is that AB49N is equipped
with an onboard LAN. In the manual, if there are some standards, charac-
teristics, equipment, or software adopted only by AB49N, it will be high-
lighted in brackets.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Shuttle Hauptplatine Handbücher
Shuttle
Shuttle FN45U Bedienungsanleitung
Shuttle
Shuttle MV43 Bedienungsanleitung
Shuttle
Shuttle HOT-603 Bedienungsanleitung
Shuttle
Shuttle HOT-591P Bedienungsanleitung
Shuttle
Shuttle AV49 Bedienungsanleitung
Shuttle
Shuttle Spacewalker MS51 Bedienungsanleitung
Shuttle
Shuttle SK41G Bedienungsanleitung
Shuttle
Shuttle Spacewalker MK20 Bedienungsanleitung
Shuttle
Shuttle HOT-681 Bedienungsanleitung
Shuttle
Shuttle Spacewalker AV40S Bedienungsanleitung
Shuttle
Shuttle Spacewalker AE14 Bedienungsanleitung
Shuttle
Shuttle HOT-641/P Bedienungsanleitung
Shuttle
Shuttle HOT-559 Bedienungsanleitung
Shuttle
Shuttle MB11 Bedienungsanleitung
Shuttle
Shuttle HOT-623 Bedienungsanleitung
Shuttle
Shuttle HOT-661Z Bedienungsanleitung
Shuttle
Shuttle AN35 Ultra Bedienungsanleitung
Shuttle
Shuttle HOT-595 Bedienungsanleitung
Shuttle
Shuttle AB60P Bedienungsanleitung
Shuttle
Shuttle MS52P Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
