Shuttle FB86 Bedienungsanleitung

FB86

Intel Pentium 4 Desktop , LGA 775 Processor

Based MAINBOARD

Shuttle®FB86

Intel Pentium 4 Desktop

LGA 775 Processor Based Mainboard

No part of this publication may be reproduced, transcribed, stored in a retrieval system,

translated into any language, or transmitted in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without

prior written permission from Shuttle®Inc.

Disclaimer

Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the

performance or use of this product.

This company makes no representations or warranties regarding the contents of this manual.

Information in this manual has been carefully checked for reliability; however, no guarantee is

given as to the correctness of the contents. In the interest of continued product improvement,

this company reserves the right to revise the manual or include changes in the specifications

of the product described within it at any time without notice and without obligation to notify any

person of such revision or changes. The information contained in this manual is provided for

general use by the customers.

Trademarks

Shuttle is a registered trademark of Shuttle Inc.

Intel, Pentium is a registered trademarks of Intel Corporation.

PS/2 is a registered trademark of IBM Corporation.

AWARD is a registered trademark of Award Software Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice: Other product names used in this manual are ascribed to their respective

owners and acknowledged.

M969

Statement of Shuttle Mainboard via the EMI Test

Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/

CISPR22/AS/NZS3548 Class B, EN55024 (1998/AS/NZS), EN4252.1 (1994), EN61000,ANSI

C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-

trated as follows:

(A)Voltage:AC110V/60HZ &AC230V/50HZ

(B) Tested Product Information:

Product Name: PC Mainboard

Status: Sample

ModelName: FB86

S/N:N/A

CPU:

External Frequency: 133 MHz

Intel Pentium 4, LGA 775 Processor: 2.53/ 2.66/ 2.8/ 2.93 GHz

External Frequency: 200 MHz

Intel Pentium 4, LGA 775 Processor: 2.8/ 3/ 3.2/ 3.4/ 3.6 GHz

Serial Port: one port with 9 pins

VGA Port: one port with 15 pins

Keyboard Port: one port with 6 pins

Mouse Port: one port with 6 pins

USB 2.0 Port: four ports with 4 pins respectively

1394a Port: two ports with 6 pins respectively

Mic-In Port: one port

Line-OUt Port: five ports

Line-InPort:one port

SPDIF-Out (Coaxial) Port: one port

SPDIF-Out (Optical) Port: one port

SPDIF-In (Optical) Port: one port

Clear CMOS button: one port

DIMM Memory (optional): DDR 400 256 MB *2

Power Cable: Detachable and Shielded (with a GND pin)

Monitor:CRT+DVI

Maximum Resolution: 1280 X 1024 V:60Hz

All CPUs have completely been tested, and values offered by the worst EMI combination of

CPU external frequency are listed as follows:

Test Mode External Frequency CPU CPU Open/Close

1200MHz P4 3.6 GHz Close

2200MHz P4 3.6 GHz Open

3133MHz P4 2.93 GHz Close

4133MHz P4 2.93 GHz Open

Remedy:N/A

EMIInterference:

Crystal:14.318MHz(X2)/ 25MHz(X3)/32.768KHz(X1)/ 24.576MHz(X4)

ClockGenerator: U4

(D) Supported Host Peripherals:

Host Peripheral ProductName Model Name

# 1 Case FB86

# 2 Power Supply PC45I2753

# 3 SerialATAWesterm Digital WD1200JD-00FYB0

# 4 Panasonic FDD JU-257A606P

# 5 PioneerDVD Player DVD-116

(E) Notices for Assembling Computers:

1. Cases should be made of iron or other metal that has good electric conductivity.

2. Cylinders in a case should be made of metal, and as having a mainboard mounted

in a case, make sure screws are all utilized and fastened on a mainboard.

3.An I/O shielding should be contacted with I/O metallic parts of a mainboard.

4. Cables should appropriately be arranged and fixed in a case. Follow instructions:

Ø Leave IDE cables not crossed upon CPU and SDRAM;

Ø Leave power cables minimum in length, and not crossed upon a mainboard;

Ø Leave CPU fan cables minimum in length, and not near CPU;

Ø Leave cables on panels and other spare cables tied in a computer case.

5.Makesure an EMI shielding attachedtoa case has properly beeninstalled.

6. Make sure a 5.25" and screws are fastened to an EMI shielding.

7. Make sure a case is closely in contact with EMI connected points.

8. Make sure there is no cleft in a case which is not deformed.

9. Make sure a PCI door is bound to a case.

10. Make sure cables of other devices (fans or some others) are fixed in a case.

Important Safety Information

SAFETY INSTRUCTIONS

1. Pleasereadthesesafetyinstructionscarefully.

2. PleasekeepthisUser‘sManual for later reference.

3. Pleasedisconnectthis equipment fromACoutlet before cleaning. Don‘tuse liquid

orsprayeddetergentforcleaning.

4. Forpluggableequipment,thesocket-outletshall be installed near the equipment

andshall be easilyaccessible.

5. Pleasekeepthisequipmentfromhumidity.

6. Laythisequipmentonareliablesurfacewheninstall.A droporfall could cause injury.

7. Donotleavethis equipment in an environmentunconditioned,itmaydamage the

equipment.

8. Theopeningsonthe enclosure are for airconvectionhenceProtectthe equipment

fromoverheating.DONOTCOVERTHEOPENINGS.

9. Makesurethevoltageofthe power source when connect theequipmenttothe

poweroutlet.

10. Placethepowercordsuchawaythatpeoplecannotsteponit.Donotplaceanything

overthepowercord.Thepower cord must be ratedfortheproductandforthevoltage

andcurrent marked on the product’selectrical ratings label.The voltage and current

ratingofthecord should be greater thanthevoltageandcurrent rating marked on the

product.

11. Allcautionsandwarnings on the equipment shouldbenoted.

12. Ifthe equipmentisnotuse forlongtime,disconnecttheequipmentfrommainstoavoid

beingdamagedbytransientover-voltage.

13. Neverpouranyliquidintoventilationopenings,thiscouldcausefireorelectricalshock.

14. CAUTION:Thecomputeris provided with a battery-powered real-timeclockcircuit.

Thereisa danger of explosionifbattery is incorrectly replaced.

Replaceonlywithsameorequivalenttyperecommendedbythemanufacture.

Discardusedbatteries according tothemanufacturer’s instructions.

15. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY WITHAPPROPRI-

ATESAFETYSTANDARDS INCLUDING IEC60825.

CAUTION :RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE. DISPOSE OF USED BATTERIES

ACCORDING TO THE INSTRUCTIONS

CLASS 1 LASER PRODUCT

- 1 -

TABLE OF CONTENTS

WHAT'S IN THE MANUAL.................................................................... 5

Quick Reference............................................................................................... 5

About This Manual ........................................................................................... 5

1 INTRODUCTION................................................................................ 6

1.1 TO DIFFERENT USERS ............................................................................. 6

FIRST-TIMEDIYSYSTEMBUILDER ....................................................... 6

EXPERIENCEDDIY USER .................................................................... 6

SYSTEMINTEGRATOR .......................................................................... 6

1.2 ITEM CHECKLIST....................................................................................... 7

2 FEATURES ........................................................................................ 8

2.1 SPECIFICATIONS ....................................................................................... 8

3 HARDWARE INSTALLATION.......................................................... 11

3.1 STEP BY STEP INSTALLATION................................................................11

Accessories of FB86..............................................................................11

STEP1CPUInstallation ........................................................................ 12

STEP 2 Set Jumpers............................................................................. 14

STEP3 Install DDR SDRAMSystem Memory........................................ 14

STEP 4Install InternalPeripheralsin SystemCase ................................ 15

STEP5 Mount theMainboardon the ComputerChassis........................ 16

STEP6ConnectFront-PanelConnector................................................ 16

STEP 7 Connect IDE, Floppy and SerialATADisk Drives ...................... 17

STEP8ConnectOtherInternalPeripherals............................................ 18

STEP9InstallAdd-onCards inExpansion Slots .................................... 20

STEP10Connect Power Supply ........................................................... 20

STEP11 Connect External Peripheralsto Back-panel ........................... 21

STEP 12 First Time System Boot Up ..................................................... 22

STEP13InstallDriver & Software Components ..................................... 23

- 2 -

3.2 JUMPER SETTINGS ................................................................................. 24

JUMPERS&CONNECTORSGUIDE.................................................... 25

Back-Panel Connectors

1394a Port ............................................................................................ 28

PS/2 Keyboard & PS/2 Mouse Ports ..................................................... 28

ClearCMOS Button............................................................................... 28

COM Port .............................................................................................. 28

VGAPort ............................................................................................... 28

GigaLAN Port ....................................................................................... 28

USB Ports ............................................................................................. 29

SPDIF-OutCoaxial Port......................................................................... 29

SPDIF-OutOpticalPort ......................................................................... 29

7.1ChannelBass/CenterPort................................................................ 29

7.1ChannelRear-OutPort ..................................................................... 29

SPDIF-InOpticalPort ............................................................................ 30

7.1ChannelFront-OutPort..................................................................... 30

7.1ChannelSurround-BackPort ............................................................ 30

Line-InPort ............................................................................................ 30

Front-Panel Connector

FRONTPANEL Connector (JP7) ........................................................... 31

Internal Peripherals Connectors

EnhancedIDEandFloppyConnectors................................................... 32

SerialATA Connectors........................................................................... 32

Other Connectors

ATXPower Supply Connectors(ATX1/BTX1) ........................................ 33

FanConnectors-FAN1/2/3 .................................................................... 34

AUX-INConnector(CN2)....................................................................... 34

- 3 -

CD-IN(CN3)(Black)/ Mini CD-IN (CN4)Connectors ............................... 35

WirelessKeyboard and Mouse Connector(JP3).................................... 35

EXT.Print Port (JP4) ............................................................................. 36

USBHeader (USB1/USB3/JP2)............................................................ 37

EXT.GPIHeader(JP1).......................................................................... 37

3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 38

INSTALLMEMORY................................................................................ 38

UPGRADEMEMORY............................................................................ 38

4 SOFTWARE UTILITY ......................................................................39

4.1 Mainboard CD Overview ......................................................................... 39

4.2 Install Mainboard Software ..................................................................... 40

4.2.A Install Intel Chipset Driver .................................................................... 41

4.2.B Install Intel VGA Driver.......................................................................... 41

4.2.C Install Intel IAA Driver............................................................................ 42

4.2.D Install Marvell Giga LAN Driver ............................................................ 42

4.2.E Install Intel USB 2.0 Driver.................................................................... 43

4.2.F Install Intel High Definition Bus ........................................................... 43

4.2.G Install Intel High Definition Audio Driver ............................................. 44

4.2.H Install DirectX9 Utility ........................................................................... 44

4.3 View the User's Manual........................................................................... 45

5 BIOS SETUP ................................................................................... 46

5.1 Enter the BIOS .......................................................................................... 46

5.2 THE MAIN MENU ...................................................................................... 47

STANDARD CMOS FEATURES........................................................... 49

ADVANCED BIOS FEATURES............................................................. 52

ADVANCED CHIPSET FEATURES...................................................... 57

INTEGRATEDPERIPHERALS.............................................................. 59

POWERMANAGEMENTSETUP ......................................................... 64

- 4 -

PNP/PCICONFIGURATIONS ................................................................ 68

PCHEALTHSTATUS............................................................................ 70

FREQUENCY/VOLTAGECONTROL..................................................... 72

LOAD FAIL-SAFE DEFAULTS.............................................................. 74

LOADOPTIMIZEDDEFAULTS ............................................................. 74

SET PASSWORD ................................................................................. 75

SAVE & EXIT SETUP............................................................................ 76

EXITWITHOUTSAVING........................................................................ 76

- 5 -

WHAT'S IN THE MANUAL

Quick Reference

Hardware Installation >> Step-by-Step ................................................ Page 11

Jumper Settings >> A Closer Look.......................................................Page 24

Drivers/Software Utilities >> How to Install .........................................Page 39

BIOS Setup >> How to Configure.........................................................Page 46

About This Manual

For First-Time DIY System Builder.........................................................Page 6

For Experienced DIY User ......................................................................Page 6

For System Integrator .............................................................................Page 6

Inhaltsverzeichnis

Andere Shuttle Hauptplatine Handbücher

Shuttle

Shuttle AN51R Bedienungsanleitung

Shuttle

Shuttle AN35 Ultra Bedienungsanleitung

Shuttle

Shuttle AB61 Bedienungsanleitung

Shuttle

Shuttle Spacewalker AV30 Bedienungsanleitung

Shuttle

Shuttle HOT-675V Bedienungsanleitung

Shuttle

Shuttle MV43P Bedienungsanleitung

Shuttle

Shuttle FS51 Bedienungsanleitung

Shuttle

Shuttle HOT-559 Bedienungsanleitung

Shuttle

Shuttle HOT-591 Bedienungsanleitung

Shuttle

Shuttle AB60P Bedienungsanleitung

Shuttle

Shuttle HOT-675Z Bedienungsanleitung

Shuttle

Shuttle MB47N Bedienungsanleitung

Shuttle

Shuttle MV43V Bedienungsanleitung

Shuttle

Shuttle HOT-679 Bedienungsanleitung

Shuttle

Shuttle FN95 Bedienungsanleitung

Shuttle

Shuttle AK12 Bedienungsanleitung

Shuttle

Shuttle AK35GT Bedienungsanleitung

Shuttle

Shuttle Spacewalker MS51 Bedienungsanleitung

Shuttle

Shuttle MT63 Bedienungsanleitung

Shuttle

Shuttle Spacewalker AE14 Bedienungsanleitung

Shuttle

Shuttle FS51 Bedienungsanleitung

Shuttle

Shuttle AN50R Bedienungsanleitung

Shuttle

Shuttle FN45U Bedienungsanleitung

Shuttle

Shuttle HOT-673 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung