SIAP+MICROS E005 OLIMPO Bedienungsanleitung

e005 OLIMPO

Data Collection Unit

User’s Manual (ver. 5.12)

SIAP+MICROS S.r.l.

Via del Lavoro,1 tel +39 0438 491411 – fax +39 0438 401573

I – 31010 – Castello Roganzuolo email info@siapmicros.com

di San Fior (TV) www.siapmicros.com

e005 OLIMPO

ver. 00

Manuale utente Indice Stampato in

e005-di OLIMPO (eng).doc Siap+Micros S.r.l.

SUMMARY

1Precautions and safety measures......................................................................................................... 1

1.1 The aim of use ...................................................................................................................................... 1

1.2 Warnings ............................................................................................................................................... 2

1.3 Moving the unit...................................................................................................................................... 2

1.4 Unpacking ............................................................................................................................................. 2

1.5 During the functioning ........................................................................................................................... 2

1.6 Storage.................................................................................................................................................. 3

1.7 Maintenance.......................................................................................................................................... 3

1.7.1 Cleaning the unit .......................................................................................................................... 3

1.7.2 Substitution of the fuse................................................................................................................. 3

1.8 The panel description............................................................................................................................ 4

2The use of the Olimpo main unit ........................................................................................................... 5

1.9 Switching on the Olimpo main unit........................................................................................................ 5

1.10 Setup..................................................................................................................................................... 5

1.10.1 Setting the clock ........................................................................................................................... 5

1.10.2 Resetting the memory to zero ...................................................................................................... 6

1.10.3 Configuration of the parameters................................................................................................... 6

1.11 Acquisition cycle.................................................................................................................................... 6

1.12 The registration ..................................................................................................................................... 7

1.13 The registration autonomy .................................................................................................................... 8

1.14 Substitution of the MEMORY CARD..................................................................................................... 8

1.14.1 Data format................................................................................................................................... 8

1.15 Record format for Statiscal Data......................................................................................................... 10

1.15.4 An example of the statistical data record format........................................................................ 12

1.16 The record format of the Instant Data ................................................................................................. 12

1.16.4 An example of the Instant data in the record format ................................................................. 15

1.17 The record format of Data in Alert....................................................................................................... 16

1.17.4 An example of the record format of Data in Alert....................................................................... 19

3Technical features............................................................................................................................... 21

4Safety regulations ............................................................................................................................... 22

1EMC .................................................................................................................................................... 23

1.1 Environmental conditions of use ......................................................................................................... 24

5Conformity Declaration ....................................................................................................................... 25

6The schematic of the Main Unit’s........................................................................................................ 26

7Memory card drive (OLM-LMC) .......................................................................................................... 27

1.2 Downloading instructions .................................................................................................................... 27

e005 OLIMPO

ver. 00

User’s manual pag. 1 di 29 Printed in

e005-di OLIMPO (eng).doc Siap+Micros S.r.l.

1 Precautions and safety measures

Olimpo is a measuring instrument which allows you to acquire electrical measures , elaborate and memorize

them. This unit complies with the requirements set out by the Low Tension 73/23 CEE Directive, modified

according to the 93/68/CEE and the EMC 89/336/CEE Directives.

This unit has been designed to comply with the CEI EN 61010 Norm, to ensure the safety of the operator it is

necessary that all of the following instructions described in this manual are carried out accordingly and read

with special attention all notes preceded by these symbols:

(Be careful, refer to the documents)

(Be careful, risk of an electric shock)

Olimpo is an instrument which was invented to be used by trained staff for a specific use. The produced

declines any responsibility in the case of faults caused by disobeying the instructions,tampering,any use

which this manual does not indicate,improper use of the unit,operation of the unit by untrained staff.Only

authorized staff should be allowed access to the working area to carry out the standard maintenance

procedures.

-The unit should be connected to an electric earthing (or of safety) by using a three wired AC power

cable.This cable should be connected to Complied electric socket equipped with three contacts.

-The unit must not be used near inflammable gases,smoke or anyother surrounding where there is a risk

of explosion.

-Do not take any measurent if any fault or breakage has been noticed in this unit.

-Do not enter inside the unit without another person present who would be able to provide help if

necessary.

-Do not remove,modify or replace any electrical or mechanical part of the unit without authorization.

-The substitution of any spare parts and all internal checks must be carried out by qualified and trained

maintenance staff,after having disconnected the unit from the electric power supply.

-Pay attention to any warning notice against potentially dangerous procedures.

1.1 The aim of use

This manual is to provide all necessary instructions for the correct installation and use of the Olimpo product.

The Olimpo Main Unit may be used in the following fields:

1) The acquisition and memorization of the river and basins' level

2) The acquisition and memorization of the height of snow.

3) The acquisition and memorization of analog to digital parameters.

4) An integrated system of remote controlled water supplies.

Preserve with care this manual and always keep a copy avilable for the operators.

e005 OLIMPO

ver. 00

User’s manual pag. 2 di 29 Printed in

e005-di OLIMPO (eng).doc Siap+Micros S.r.l.

1.2 Warnings

The producer declines all responsibility if a fault is due to a disobedience of the instructions, tampering, any

use not stated in this manual, improper use of the unit, the use of the unit by untrained staff. Only authorized

and specially trained, qualified staff may have access to the working area for the standard maintenance and

operative purposes.

Safety measures

-This unit should be connected to an electric earthing (or of safety).

-The unit must not be used in the presence of inflammable gas, smoke or any other environmental risk of

explosion.

-Do not remove, modify or substitute any electrical or mechanical part of the unit without authorization.

-The substitution of any components and any internal intervention should be carried out only by qualified,

trained maintenance staff, after having disconnected the unit from the main power supply.

-Pay attention to any warning notice against dangerous procedures.

1.3 Moving the unit

In order to avoid damaging the unit during transport procedures we recommend that the unit be kept in an

upright vertical position without shaking it.

1.4 Unpacking

Before unpacking the unit and installing it ensure that the following precautions have been taken:

- Use protective gloves to avoid scratches and abrasions.

- If any damage due to the transport procedures carried out by the supplier return immediately to the

supplier.

- Once unpacked ,place the unit and its components on a flat surface.

- Avoid turning the unit upside down.

- Be careful with the electrical sockets placed at the front and back of the unit during the operations.

Before installing the unit check the following :

- The tension of the network of the installing area complies with the unit's requirements.

- Check the main switch of the unit is switched off.

- Avoid switching on the unit before having carefully read the installation instructions indicated in this

manual.

1.5 During the functioning

During the functioning never open the internal door without having switched off the specific switch indicated

as PWR . After having switched off the unit open the internal door.

And deactivate the power line 220Vac by turning the magneto thermal switch situated on the right.

However, always wear suitable protective clothing necessary for such a working environment.

e005 OLIMPO

ver. 00

User’s manual pag. 3 di 29 Printed in

e005-di OLIMPO (eng).doc Siap+Micros S.r.l.

1.6 Storage

If the unit is not used for long periods (at least one year) all cables of the unit should be disconnected, kept in

a transparent plastic bag and tied with adhesive tape. Label the bag suitably to indicate the contents and

weight (15kg) of the unit , indicate that this bag should be "HANDLED WITH CARE".

Keep the unit in an environment which has a temperature which varies between 0 to 60 °c with an humidity

level below 80%.Ensure that the unit is placed in a stable position and where it can't damaged or moved due

to inexperience or distraction. Do not place any other objects or things which weigh more than a few

kilograms on top of the unit. Do not place the unit on top of anything, ensure the stability of the supporting

platform below.

1.7 Maintenance

1.7.1 Cleaning the unit

Before cleaning the unit disconnect all power cables of the unit. Use a soft, dry cloth to clean the unit. Never

use wet cloths, solvents, water or other liquids for cleaning purposes.

1.7.2 Substitution of the fuse

Before carrying out the substitution of the fuses disconnect all power cables. Extract the fuses drawer placed

near the SAIET discharger and substitute the fuse with a fuse of 1.0 A dimension 5x20mm,as indicated on

the label situated on the back of the unit.

e005 OLIMPO

ver. 00

User’s manual pag. 4 di 29 Printed in

e005-di OLIMPO (eng).doc Siap+Micros S.r.l.

1.8 The panel description

Display

Membrane

keyboard

Memory

card

Red Led

PWR

COM1 - RS232

Connection to PC

PWR Switch

COM2 - RS232

Connection to GSM

e005 OLIMPO

ver. 00

User’s manual pag. 5 di 29 Printed in

e005-di OLIMPO (eng).doc Siap+Micros S.r.l.

Digit ‘S’ for 2 seconds to start setup procedures

Resetting procedures in action for the start up process

Press "S" for 2 seconds for start up process

Menù OLIMPO 14:55:17 29/08/2001

T=PR. TIME A=RES. MEMORY C=CONFIGURATION

HH MM SS GG MM AA =

2 The use of the Olimpo main unit

1.9 Switching on the Olimpo main unit

The Olimpo Main unit is switched on by pressing the switch situated at the front of the Main unit next to the

LCD display. The LCD light will immediately come on and after a few seconds the OLIMPO allows you to

enter the SETUP procedures by pressing the button indicated as "S" as written on the display:

If no letters are digited the Olimpo Main Unit will carry out the preset acquisition procedures.

1.10 Setup

At any moment of the acquisition cycle it is possible to have access to the SETUP module and layout the

variables of measurement and deal with them as described below, the meaning of these various layouts from

the configuration menu is shown below:

Press the button "S" which will appear on the display:

After a few seconds the wording "Press S for 2 seconds for SETUP" will appear:

Like this you have access to the menu for the SETUP module as indicated with the wording below:

1.10.1Setting the clock

T = PR. ORA : Menu to set the clock which is inside the main unit.

Digit the button "T" to have access to this menu and on the display will appear :

e005 OLIMPO

ver. 00

User’s manual pag. 6 di 29 Printed in

e005-di OLIMPO (eng).doc Siap+Micros S.r.l.

Clock programming OK

Resetting the memory 0=RAM-ATA 1=RAM 2=ATA

To set the clock it is necessary to follow the structure indicated on the display with two numbers for each

field, where :

HH = hour MM = minutes SS = seconds GG = day MM = month AA = year

Between each pair of numbers it is required that you insert a space, the digital values are visualized as

equal. If during the insertion the operator should realise that he has forgotten or mistaken a value he can, by

digit the backspace button ( ), can correct the mistaken value. After having completed the insertion of all

fields digit RETURN, if the values digited are correct, on the display the following wording will appear:

Otherwise you will be asked to reinsert the clock layout values.

1.10.2Resetting the memory to zero

A = Resetting the memory : Allows you to reset the internal memory data to zero and/or the Memory card.

Digit the button "A" to gain access to the menu and on the display will appear:

Choose from the memory area to reset to zero by digiting the relative number:

0 = internal memory (RAM) and the memory card (ATA) internal memory (RAM) e memory card (ATA)

1 = Internal memory (RAM)

2 = Memory card (ATA)

The digited value will appear after the equal sig, press the RETURN button and the operation will be carried

out . Afterwards the Olimpo Main Unit will carry out the set acquisition cycle. In the case you should not want

to carry out the resetting of the memory simply press the RETURN button.

1.10.3Configuration of the parameters

C = Configuration : This function is effective only if activated by the OLIMPO SW interface programme and

allows to change the parameters set out by itself directly from the local keyboard.

1.11 Acquisition cycle

If no characters are digited at the start up the OLIMPO Main Unit will automatically start the acquisition Cycle

for data. Such a cycle will be carried out at the preset intervals generated by the OLIMPO SW configuration.

The acquisition and registration intervals of the various data are normally set by the OLIMPO SW as

follows:

•Instant Data every 10 seconds

•Average Data every 30/60 minutes

•Minimum and Maximum Data every 30/60 minutes

e005 OLIMPO

ver. 00

User’s manual pag. 7 di 29 Printed in

e005-di OLIMPO (eng).doc Siap+Micros S.r.l.

1.12 The registration

The Olimpo Main Unit deals with two different types of solid state memories to register the acquired data:

•internal memory of a RAM type situated in the mother circuit board.

•(optional) memory of a memory card type (ATA Flash) which is extractable, inserted into the

PCMCIA connector placed at the front of the Olimpo Main Unit.

Herewith, we indicate a typical subdivision of the internal memory of Olimpo (RAM):

File 1 = 5 Kbyte

File 2 = 5 Kbyte

File 3 = 5 Kbyte

File 4 = 5 Kbyte

File 5 = 5 Kbyte

File 6 = 300 Kbyte

File 7 = 1 Kbyte

File 8 = 1 Kbyte

File 9 = 1 Kbyte

The acquired data taken by the Olimpo Main Unit are memorized on File 6 while the instant data are usually

memorized on File 1

Below is shown a typical subdivision of the auxiliary memory (optional) memory card (ATA Flash):

File 10 = 7500 Kbyte

File 11 = 1 Kbyte

File 12 = 1 Kbyte

File 13 = 1 Kbyte

File 14 = 1 Kbyte

File 15 = 1 Kbyte

File 16 = 1 Kbyte

File 17 = 1 Kbyte

File 18 = 1 Kbyte

File 19 = 1 Kbyte

File 10 contains a copy of the historical data memorized in the internal File 6 and may have a double use:

1. To be used as a backup in the case of malfunctioning.

2. A hugh memory capacity to be used if the Olimpo Main Unit is unreachable or under control for long

periods.

e005 OLIMPO

ver. 00

User’s manual pag. 8 di 29 Printed in

e005-di OLIMPO (eng).doc Siap+Micros S.r.l.

The data held in the memory card may be downloaded onto a Personal Computer equipped with a RS232 by

using the suitable LMEMC driver (see relative paragraph)

When the memory card is read by the driver, it will be automatically predisposed to be reset at zero when it is

installed in any other OLIMPO station.

The reading phases, canceling and formatting of the memory card are dealt with by the OLIMPO SW

Software.

1.13 The registration autonomy

Considering a registration with a dynamic record format (see the relative paragraph) a station which acquires

5 parameters ad memorize an average every 30 minutes would have a capacity of :

file 6 300K internal memory = approx. 60gg

file 10 7500K memory card = approx. 1500gg

1.14 Substitution of the MEMORY CARD

To substitute the memory card you have to carefully follow the instructions below:

1. Switch off the OLIMPO Main Unit

2. Extract the MEMORY CARD by using the specific button.

3. Insert the new MEMORY CARD.

4. Switch on again the unit (wait for approx.10-15 seconds before verifying the acquisitions.

N.B. : The insertion or the extraction of the MEMORY CARD without having switched off the unit could

cause a malfunctioning of the Main Unit.

1.14.1Data format

The data memorized in the files of the OLIMPO Main Unit have been formatted according to a MICROS

standard defined in the Dynamic Record format.

The Dynamic Record Format contains all of the information regarding the station (station number),the date

and time of the data memorization and the type of data memorized.

In the Format records with dynamic structuring, the length of the format is variable, depending on the number

and of the type of data contained. However, n such situations where the data to be inserted into the Record

are minimum, the length of the Format itself and consequently the space occupied by the data will result in

being quite full.

This Record Format adapts in order to accept the instant data (constantly being supplied to the Main Unit)the

statistical data ( made available to the Main Unit by the Scanner programme.) and the data of the alarm and

of calibration (made available to the Main Unit when this event occurs).

The Record Format consists in three parts each individual from the other are referred to as:

•HEAD •BODY •TERMINATOR

Inhaltsverzeichnis

Andere SIAP+MICROS Datenlogger Handbücher

SIAP+MICROS

SIAP+MICROS t021 TLU Leitfaden

SIAP+MICROS

SIAP+MICROS p099 PalB10 Leitfaden

SIAP+MICROS

SIAP+MICROS e015a DA15K Bedienungsanleitung

SIAP+MICROS

SIAP+MICROS t026 TTEPRH Leitfaden

Beliebte Datenlogger Handbücher anderer Marken

TESTO

TESTO 176 Bedienungsanleitung

HT Italia

HT Italia XL421 Bedienungsanleitung

HBM

HBM SOMAT XR CX22B-R Bedienungsanleitung

Agtrix

Agtrix 380i Bedienungsanleitung

Hobo

Hobo H8 Pro Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech PCI2320 Bedienungsanleitung

Athena

Athena GET SL1 Bedienungsanleitung

Motec Systems

Motec Systems C185 Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech USB2832 Bedienungsanleitung

Rotronic

Rotronic HygroLog HL20 Bedienungsanleitung

MRC

MRC DW-6092 Bedienungsanleitung

Racelogic

Racelogic VBOX LapTimer Bedienungsanleitung

Edu-Logger

Edu-Logger 900-240 Bedienungsanleitung

Elma

Elma DT173 Bedienungsanleitung

MadgeTech

MadgeTech PRTemp140 Technisches Datenblatt

Comet

Comet U0121M Bedienungsanleitung

pico Technology

pico Technology PT-104 Bedienungsanleitung

Soil Instruments

Soil Instruments GTecLink Bedienungsanleitung

SIAP+MICROS e005 OLIMPO Bedienungsanleitung

Beliebte Datenlogger Handbücher anderer Marken