Solo GoPro Remote Controller User Manual
v1.0 –rev B Page 6
Troubleshooting
‘I am unable to control my GoPro! Please Help!’
•If the two LEDs on the SGRC are dimly lit, simply press the RST button. Both LEDs should
become bright and then flashing, indicating regular operation.
•If the RED LED is flashing steadily, it is not connected to GoPro. Steps to resolve are:
1. Restart GoPro
2. Restart GoPro WiFi connection (In the GoPro connections menu).
3. Turn off GoPro, remove battery and wait 10 seconds. Reinsert and turn on.
4. Re-pair GoPro and SGRC. Follow the installation instructions for pairing.
5. Contact tom@sidepilot.net
•If the RED LED is bright and steady (not flashing), but the GREEN (ACT) LED is not flashing at
all, then there is no communication between Solo and SGRC. Check Solo’s parameters using
a GCS such as Solex or SidePilot. SERIAL5_ parameters must be set as per the installation
instructions. Solo must be restarted after changing parameters.
•RED LED is stable, GREEN LED is flashing, but I still cannot control my GoPro at all! In this
case, please contact tom@sidepilot.net with you GoPro model including its firmware
version, Solo’s firmware version (both controller and copter), your mobile device model and
ideally a video showing the behaviour.
FAQ
Just some of the most common questions asked:
Q: What is the blinking green LED underneath?
A: This is the Solo connection indicator of the SGRC. If it is not blinking, and you are unable to control
your GoPro, you should double check Solo’s parameter settings.
Q: I want X feature/Why doesn’t this do X??
A:
All
feedback
and
improvement
suggesti
ons
are
welcome!
Please
conta
ct
[email protected], we are happy to hear from you!
