Siemens A53 Bedienungsanleitung

right page (1) of A53 DTC en, A31008-H6230-A1-2-7619 (17.01.2005, 16:02)

Siemens AG 2003, I:\Mobil\a53_v2\en\DTC_A53_Overview.fm

Overview of the phone

VAR Language: en; VAR issue date: 040915

Overview of the phone

1Display indicators

Signal strength/battery level.

2Soft keys

Press the soft key to call up the function

that is displayed as §Text§ or icon on the

grey fields above the key.

3ACall key

Dial displayed phone number or name,

accept calls. In standby mode: Display the

last calls.

4BOn/Off/End key

• Switched off: press and hold to

switch on.

• During a conversation or in an applica-

tion: press briefly to finish.

• In menus: press briefly to go back a

level. Press and hold to return to stand-

by mode.

• In standby mode: press and hold to

switch off phone.

5Input keys

Numbers, letters.

6*Press and hold

• In standby mode: switch on/off all

signal tones (except alarm).

• For incoming calls: only switch off

ring tones.

7Press and hold

In standby mode: switch key lock on/off.

Additional note

Please read the instructions before using the

phone.

Service provider

17.02.2003 09:15

New SMS Menu

blank page (2) of A53 DTC en, A31008-H6230-A1-2-7619 (17.01.2005, 16:02)

Siemens AG 2003, I:\Mobil\a53_v2\en\DTC_A53_Main.fm

VAR Language: en; VAR issue date: 040915

2Getting Started

Getting Started

The front and back covers of the phone and the keypad (CLIPit™ Covers, my-CLIPit™)

can be changed in seconds – no tools required. Please switch the phone off first.

To assemble the phone

To insert the SIM card

Insert SIM card in the opening, contacts pointing downwards (make sure the angled cor-

ner is in correct position r). Push gently until it engages s.

Additional notes

Your phone's display is delivered with a protective film. Remove this film before getting started.

To avoid damage to the display, the phone should not be used without the front cover.

pqrs tuv

wxyz

jkl

abc def

ghi mno

LITHIUM ION

right page (3) of A53 DTC en, A31008-H6230-A1-2-7619 (17.01.2005, 16:02)

Siemens AG 2003, I:\Mobil\a53_v2\en\DTC_A53_Main.fm

Switch on/off, PIN entry

VAR Language: en; VAR issue date: 040915

Charge battery

The battery is not fully charged when de-

livered. Plug in the charger cable at the

bottom of the phone, plug in the power

supply unit to the mains power socket

and charge for at least two hours.

Charging time

The charging time is 2 hours. Ambient

temperature of 5 °C to 40 °C (icon flashes

as a warning when 5 °C above/below this).

Switch on/off, PIN entry

Switch on/off

Press and hold On/Off/End keyBto

switch on or off.

Enter PIN

The SIM card can be protected with a 4–8

digit PIN. Enter the PIN code using the

number keys (the display shows a series

of asterisks, if you make a mistake press

§Clear§). Confirm your input with §OK§. Log-

ging on to the network will take a few

seconds.

First time switching on phone, the time

and date must be set.

Standby mode

When the name of the service provider/

logo appears on the display, the phone is

in standby mode and ready for use.

Press and hold the On/Off/End keyBto

return to standby mode from any menu

option.

Security

The phone and SIM card are protected

against misuse by several security codes.

Keep these confidential numbers in a safe

place where you can access them again if

required.

§Menu§ ¢Setup ¢Security ¢Codes

¢Select a function.

PIN control

The PIN is usually requested each time

the phone is switched on. You can deacti-

vate this feature but you risk unauthor-

ised use of the phone. Some service pro-

viders do not permit deactivation of the

control.

Change PIN

You can change the PIN to any 4–8 digit

number you may find easier to remember.

Change PIN 2

(Displayed only if PIN 2 is available.)

Proceed as with Change PIN.

Change phonecode

You define and enter the phone code

(4–8 digits) when calling a phone code

protected function (e.g. Direct call, p. 5)

for the first time. It is then valid for all

protected functions. If it is entered incor-

rectly three times the phone is locked.

Contact the Siemens Service.

Clear SIM card barring

If the PIN is entered incorrectly three

times, the SIM card is barred. Enter the

PUK (MASTER PIN) provided by your serv-

ice provider with the SIM card. If the PUK

(MASTER PIN) has been lost, please con-

tact your service provider.

pqrs tuv

ghi

Siemens AG 2003, I:\Mobil\a53_v2\en\DTC_A53_Main.fm

left page (4) of A53 DTC en, A31008-H6230-A1-2-7619 (17.01.2005, 16:02)

Making a phone call

VAR Language: en; VAR issue date: 040915

Prevent accidental activation

Even if PIN use is deactivated (p. 3) con-

firmation is required to switch on the

phone.

This prevents accidental activation of the

phone, e.g. when you are carrying it in a

bag or when you are travelling in an air-

craft.

After pressing and holding the On/Off/End

keyBselect §OK§ to switch on the phone

or abort the operation with §Cancel§.

Making a phone call

Dialling with number keys

The phone must be switched on (standby

mode). Enter the number (always with

prefix, if necessary with the international

dialling code). Press §Clear§ to clear the last

digit, press and hold to clear the entire

phone number. To dial press theAkey.

End call

Press the End keyBbriefly. Press this key

even if the person on the other end of the

line has hung up first.

Set volume

Use the scroll keyEto start adjusting

the volume during conversation. Set vol-

ume withG.

Redial previous numbers

To redial the phone number last called,

press the Call keyAtwice. To redial other

numbers that were dialled previously,

pick out the required phone number from

the list withG, then pressAto dial.

When a number is busy

For automatically dialling the phone

number for up to 15 minutes at increas-

ing intervals, press §Auto dial§. For phone

ringing when the busy number is free,

press §Call back§ (L). Press §Prompt§ and a

beep will remind you to redial the dis-

payed phone number after 15 minutes.

Accept call

The phone must be switched on (standby

mode). An incoming call will interrupt

any other use of the phone.

Press §Reply§ orA.

If the phone number has been transmitted

by the network, it is displayed. If the number

and the name are stored in the Phonebook,

the corresponding name is displayed in-

stead. If set, an animation can be dis-

played instead of the bell icon.

Reject call

§Reject§ orBpress briefly.

Held call

Make a new connection during a call with

ymenu§ ¢Hold ¢J(dial new phone

number, also from Phonebook:F). With

§Swap§ you can swap back and forth be-

tween both calls.

Additional costs will be incurred for the

2nd phone connection.

right page (5) of A53 DTC en, A31008-H6230-A1-2-7619 (17.01.2005, 16:02)

Siemens AG 2003, I:\Mobil\a53_v2\en\DTC_A53_Main.fm

Phonebook

VAR Language: en; VAR issue date: 040915

Conference b

Make a new connection during a call with

ymenu§ ¢Hold ¢J(dial a new phone

number).

With ymenu§ ¢Conference you can join

the held call. Repeat this procedure until

all participants are linked together (up to

5participants).

All calls in the conference are ended si-

multaneously when the End keyBis

pressed.

Additional costs will be incurred for every

additional phone connection.

Call menu

Several functions are only available dur-

ing a call:

ymenu§ ¢Select a function.

Direct call

The phone can be locked, so it's only pos-

sible to dial a defined number.

Switch on

§Menu§ ¢Setup ¢Security ¢Direct call

Press §Select§ and enter phone code. When

first prompted you define and enter the

phone code (4–8 digits). Please do not for-

get this code! Confirm input with §OK§ and

press §Change§. Select phone number from

the Phonebook (p. 5) or enter a new one.

With §OK§ confirm On.

Use

Press and hold the right soft key>to

dial.

Switch off

Press and hold and enter phone code.

Confirm input with §OK§ and press §Change§.

With §OK§ confirm Off.

Phonebook

New entry

Open Phonebook (in standby mode)

F(select <New entry>) ¢§Select§

¢Activate input fields.

Number: Always enter phone number with

an area dialling code.

Name: Enter first name or surname.

Group: Organise entries in groups, select

with §Change§.

Location: Select location: SIM, Mobile or

Protected SIM

Record no.: This is automatically assigned

to the entry. Change with §Change§.

Press §Save§ to store the new entry.

Text entry

Press number key repeatedly until the re-

quired letter appears. The cursor advanc-

es after a short delay. Example:

2Press once for a, twice for b etc.

Press and hold to write the

number.

Ä, ä, 1–9 Umlauts and numbers are dis-

played after the relevant letters.

§Clear§ Press briefly to delete the letter

before the cursor, press and hold

to delete the whole word.

GMove the cursor (forwards/back).

Press briefly: Switch between:

abc, Abc, ABC, T9abc, T9Abc, T9ABC,

123. Status indicator in the top

line of the display.

Press and hold: All input modes

are displayed.

*Press briefly: Select special char-

acters.

Press and hold: Open input menu.

Siemens AG 2003, I:\Mobil\a53_v2\en\DTC_A53_Main.fm

left page (6) of A53 DTC en, A31008-H6230-A1-2-7619 (17.01.2005, 16:02)

Phonebook

VAR Language: en; VAR issue date: 040915

0Press once/repeatedly:

. , ? ! ’ “ 0 - ( ) @ / : _ + ~ &

Press and hold: Writes 0.

1Writes blank. Press twice = skip

line.

Call/search for an entry

Open PhonebookF, select name by typ-

ing first letter or scroll and dial withA.

Call with record no.

A record number is automatically assigned

to every new entry in the Phonebook.

JEnter record number (in standby

mode) ¢¢A

Edit entry

G¢Select entry ¢§Options§ ¢Edit

¢G(select required input field)

¢Make changes ¢§Save§

Location

An entry can be moved to different stor-

age locations in the Phonebook (edit en-

try, p. 6).

SIM (standard) ¢

Entries that are stored in the Phonebook

on the SIM card can also be used on a dif-

ferent GSM phone.

Mobile v

Phonebook entries are stored in the

memory of the mobile phone when the

memory of the SIM card is full.

Protected SIM ¡b

Phone numbers can be stored in protect-

ed locations on a special SIM card. A PIN 2

is needed for editing (p. 3).

Groups

If there are many Phonebook entries it is

best to assign them to a group, e.g.:

Family, Friends, VIP, Others

A special ring tone can sound and/or a sym-

bol can be displayed if the phone number

of a call is registered in a group.

Select a group

§Menu§ ¢Phonebook ¢<Groups>

¢G(select a group) ¢§View§

All entries of the selected group are dis-

played.

Change group assignment

You can assign a Phonebook entry to a

group when you enter it (p. 5).

F¢Select entry ¢§View§ ¢§Edit§

¢G(scroll to group) ¢§Change§

¢Select a new goup ¢§Save§

SMS to group

A memo (SMS) can be sent as a "circular"

to all members of a group. Each SMS is

charged separately!

Open <Groups> in Phonebook menu and

scroll to a group.

§Options§ ¢SMS to group ¢§Select§

¢Compose message ¢A(the group is

displayed) ¢§OK§ ¢A

The SMS is sent to the first recipient.

PressAagain to start the next send oper-

ation. Each send operation must be con-

firmed. Individual recipients may be

skipped.

Call to group b

You can call up to 5 group members one

by one and link them together in a con-

ference (function may need to be enabled

by the service provider).

Open <Groups> in Phonebook menu and

scroll to a group.

right page (7) of A53 DTC en, A31008-H6230-A1-2-7619 (17.01.2005, 16:02)

Siemens AG 2003, I:\Mobil\a53_v2\en\DTC_A53_Main.fm

Messages (SMS)

VAR Language: en; VAR issue date: 040915

§Select§ ¢Select the entries ¢§Change§

(mark/unmark entry) ¢§OK§

The first entry is dialled and the call is put

on hold. ProceedAby calling the next

entry until all marked entries are called.

With §Options§ you can link the calls on hold

in a conference.

Group call tones

You can assign different ringtones to

groups.

§Menu§ ¢Ring tones ¢Group calls

¢Select a group ¢§Select§

¢Select ring tone ¢§Select§

Messages (SMS)

Read messages

A new message is indicated on the display

with ]. Press the control key on the left

to read the message. Scroll through the

message line by line withG.

Reply menu

§Reply§ Open the reply menu.

Inbox/outbox

§Menu§ ¢Messages ¢Inbox or Outbox

The list of saved messages is shown.

Compose a message

§Menu§ ¢Messages ¢New SMS

¢write text ¢A¢J/ Q

(enter phone number or select

from Phonebook) ¢§OK§

The SMS is sent to the service centre for

transmission.

Text menu

§Options§ Open the text menu.

Write text fragments

§Menu§ ¢Messages ¢Predefined texts

¢<New entry>

¢J(write text fragment)

¢§Save§

Use text fragments

J(write message text) ¢§Options§

¢Insert text ¢G(select text fragment

from the list) ¢§Select§

The text fragment is inserted into the text

to the left of the cursor.

Text entry with T9

T9 deduces the correct word from the in-

dividual key entries by making compari-

sons with an extensive dictionary. Write a

word and finish it without looking at the

display. Simply press the keys where the

relevant letter is located once. If several

options are found in the dictionary the

most probably is displayed first. For fur-

ther options please press the right

softkey.

T9® Text Input is licensed under one or more

of the following:

U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,

5,945,928 and 6,011,554;

Canadian Pat. No. 1,331,057;

United Kingdom Pat. No. 2238414B;

Hong Kong Standard Pat. No. HK0940329;

Republic of Singapore Pat. No. 51383;

Euro.Pat. No. 0 842 463 (96927260.8)

DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;

and additional patents are pending worldwide.

Siemens AG 2003, I:\Mobil\a53_v2\en\DTC_A53_Main.fm

left page (8) of A53 DTC en, A31008-H6230-A1-2-7619 (17.01.2005, 16:02)

Profiles

VAR Language: en; VAR issue date: 040915

Profiles

§Menu§ ¢Profiles

Three profiles are standard with default

settings, they can be changed however:

Normal environment, Quiet environment,

Noisy environment

You can set two personal profiles

(<Name>).

The special profile Aircraft mode cannot be

changed.

Activate

Select default profile or personal profile

¢§Select§.

Change setting

Select profile ¢§Options§ ¢Change settings

The list of available functions is displayed.

Aircraft mode

The phone will automatically switch off if

you select this profile. Even the alarm

tone is deactivated. An alarm is only

shown on the display. It is not possible to

modify this profile

Normal operation

The next time you switch on the phone

and return to normal operation the de-

fault profile will be activated.

Setup

Display

§Menu§ ¢Setup ¢Display

¢Select a function.

Language

§Menu§ ¢Setup ¢Language

Set the language of the display text.

"Automatic" will set the language of your

home service provider. Reset to this lan-

guage in standby status:

*# 0 0 0 0 # A

Screensaver

The screensaver shows a picture on the

display as soon as a period that can be set

by you has elapsed. The function is ended

by an incoming call or by pressing any key.

Call setup

§Menu§ ¢Setup ¢Call setup

¢Select a function.

Hide ID b

When switched on, the display of the call-

ing party shows your phone number (de-

pendent on service provider). To suppress

this display, you can activate the "Hide ID"

mode.

Call waiting b

If you are registered for this service, you

can check whether it is set and you can

activate/deactivate it with Call waiting.

Minute beep

During the call, you will hear a beep after

each minute as a reminder of the time

elapsed.

right page (9) of A53 DTC en, A31008-H6230-A1-2-7619 (17.01.2005, 16:02)

Siemens AG 2003, I:\Mobil\a53_v2\en\DTC_A53_Main.fm

Setup

VAR Language: en; VAR issue date: 040915

Divert

You can set the conditions for which calls

are diverted to your mailbox or other

numbers.

§Menu§ ¢Setup ¢Divert

¢Select a function.

Set up call divert (example)

All calls b

All calls are diverted. nis shown in the

top line of the display in standby mode.

Unanswered calls b

Includes Unanswered, Not reachable,

No reply, Busy

§Select§ ¢Set ¢J(Enter the phone

number to which the call should be di-

verted) ¢§OK§

After a short pause, the setting is con-

firmed by the network.

Status check

After a short pause the current informa-

tion is shown.

pCondition set.

oNot set.

Display, if status is unknown

(e.g. on a new SIM card).

Clear all b

All set diversions are cleared.

Clock

§Menu§ ¢Setup ¢Clock

¢Select a function.

Security

§Menu§ ¢Setup ¢Security

¢Select a function.

Direct call

Only one phone number can be dialled.

Press and hold control key on the right (p. 5).

This SIM only b

Your phone is prevented from being used

with a different SIM card.

Barrings b

Network barring restricts the use of your

SIM card.

All outgoing calls: Outgoing calls, except

emergency 999 calls, are blocked.

Outgo internat: Only national calls can be

made.

Out.int.x home: International calls are not

permitted, except for calls to your home

country.

All incom. calls: The phone is blocked from

receiving all incoming calls.

When roaming: You do not receive any calls

outside your home network.

Status check: Query the status of your bar-

rings.

Clear all: Clear all barrings. Password pro-

tected!

Phone identity

The phone identity number (IMEI) is dis-

played.

Master reset

The phone is reset to the default values

(does not apply to SIM card and network

settings).

Alternative input in standby mode:

*# 9 9 9 9 # A

Siemens AG 2003, I:\Mobil\a53_v2\en\DTC_A53_Main.fm

left page (10) of A53 DTC en, A31008-H6230-A1-2-7619 (17.01.2005, 16:02)

Ring tones

VAR Language: en; VAR issue date: 040915

Network

§Menu§ ¢Setup ¢Network

¢Select a function.

Network info

The list of GSM networks currently availa-

ble is displayed.

Auto network selection

If activated, the next network is dialled in

the order of your "preferred networks".

Choose network

The network search is restarted.

Preferred network

Set the service providers you prefer when

you leave your home network.

Fast search

Speed up network reconnection.

Ring tones

§Menu§ ¢Ring tones

¢Select a function.

Set the tones to match your needs.

Ringer setting

Activate/deactivate the ring tone or re-

duce it to a short beep.

Volume

Set the same volume for all ring tones.

GSet volume.

§OK§ Confirm.

dCall tone, Group call tones, Other call

tone, Alarm tone, Message tone

The ring tones for the stated types of call/

functions can be set separately.

More Tones

Call screening b

Only calls from numbers that are in the

Phonebook or in a predefined group are

signalled audibly or by silent alert. Other

calls are only displayed.

Key tones

Set acoustic key acknowledge:

Click or Tone or Silent

Minute beep

During the call, you will hear a beep once

a minute as a reminder.

Information tones

Set service and alarm tones.

Alarm clock

Activate/deactivate

§Menu§ ¢Alarm clock

The alarm will ring at the time set by you,

even when the phone is switched off.

§On§/§Off§ Activate/deactivate the alarm.

Setting

Set time for alarm call (hh:mm), then §OK§.

Inhaltsverzeichnis

Andere Siemens Handy Handbücher

Siemens

Siemens SF65 Bedienungsanleitung

Siemens

Siemens ST55 Bedienungsanleitung

Siemens

Siemens M65 Bedienungsanleitung

Siemens

Siemens SX1 Bedienerhandbuch

Siemens

Siemens S6 Bedienungsanleitung

Siemens

Siemens C75 Bedienungsanleitung

Siemens

Siemens M65 Bedienungsanleitung

Siemens

Siemens C75 Einrichtungshandbuch

Siemens

Siemens Xelibri Bedienungsanleitung

Siemens

Siemens A56i Bedienungsanleitung

Siemens

Siemens S55 Bedienungsanleitung

Siemens

Siemens PEGASUS-DTC AX72 Bedienungsanleitung

Siemens

Siemens C55 Bedienungsanleitung

Siemens

Siemens S55 Bedienungsanleitung

Siemens

Siemens S65 Bedienungsanleitung

Siemens

Siemens A55 Bedienerhandbuch

Siemens

Siemens C65 Bedienungsanleitung

Siemens

Siemens Gigaset SL75 WLAN Bedienungsanleitung

Siemens

Siemens S55 Bedienungsanleitung

Siemens

Siemens mobile phone Bedienungsanleitung

Siemens

Siemens EF81 Bedienungsanleitung

Siemens

Siemens AX75 Einrichtungshandbuch

Siemens

Siemens SL65 Bedienungsanleitung

Siemens

Siemens SP65 Bedienungsanleitung

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LG LM-X420QN Bedienungsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung