Siemens C65 Einrichtungshandbuch

Company Confidential

Page 1of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

Service Repair Documentation

Level 2.5 - C65

Release Date Department Notes to change

1.0 01.06.2004 ICM MP CCQ GRM T New document

Company Confidential

Page 2of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

Introduction

This Service Repair Documentation is intended to carry out repairs on Siemens repair level

2.5. The described failures shall be repaired in Siemens authorized local workshops.only

All repairs have to be carried out in an ESD protected environment and with ESD protected

equipment/tools. For all activities the international ESD regulations have to be considered.

Assembling/disassembling has to be done according to the latest C65 Level 2 repair

documentation. It has to be ensured that every repaired mobile Phone is checked according

to the latest released General Test Instruction document (both documents are available in

the Technical Support section of the C-market).

Check at least weekly C-market for updates and consider all C65 related Customer Care

Information

C65 Partnumber on IMEI label: S30880-S7800-#xxx

, while # may be any letter (A-Z) and xxx may be any number from 100, 101, 102....

If you have any questions regarding the repair procedures or technical questions spare not

hesitate to contact our technical support team in Kamp-Lintfort, Germany:

Tel.: +49 2842 95 4666

Fax: +49 2842 95 4302

e-mail: [email protected]

Company Confidential

Page 3of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

Table of Content

1C65 board layout ...........................................................................................................................4

2Connector SIM Card Reader.........................................................................................................5

3Connector IO Jack.........................................................................................................................6

4Connector Board to Board...........................................................................................................75

Connector Battery .........................................................................................................................8

6IRDA Diode ...................................................................................................................................9

7Connector Display .......................................................................................................................10

8Connector Camera ......................................................................................................................11

9Connector RF ..............................................................................................................................12

10 Joystick ....................................................................................................................................13

Company Confidential

Page 4of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

1 C65 board layout

Jigs, Tools and Working materials for all described repairs:

- hot air blower

- soldering gun

- tweezers

- flux

- solder

Joystick SW

Diode

IRDA

Connector

SIM CARD READER

Connector

IO JACK

Connector

BOARD TO BOARD

Connector

BATTERY

Connector

Board to Board

Connector

Display

Company Confidential

Page 5of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

2 Connector SIM Card Reader

Fault Symptoms

Customer: GRT:

Handset does not accept SIM card SIM Card Problems

Connector SIM Card Reader

Use soldering iron to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z97-C335

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 43300 Interface/SIM Cardreader/Mechanical Damage

SIM Card Problems

Check the status of the

SIM card reader visually

okay

not okay

Level 2 Repair

SCRAP don´t

send back to WSC

Exchange

SIM Card reader

- check for twisted or

bended contacts

- check for dry joints

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

not okay

okay

not okay

Watch for oxidation and

damaged pads of the SIM

card reader

Company Confidential

Page 6of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

3 Connector IO Jack

Fault Symptoms

Customer: GRT:

Charging Problems No connection to GRT

Problems with external loudspeaker or microphone when using a car kit Tbd.

Problems with accessories connected at the IO connector

Connector IO Jack

Use soldering iron to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z93-C303

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 46100 Interface/Charging Connector/Mechanical Damage

47300 Interface/Data Interface/Mechanical Damage

4B100 Interface/Headset Connector/Mechanical Damage

IO connector Problems

Exchange

IO connector

not okay

okay

Check the status of the

IO connector visually

okay

not okay

Level 2 Repair

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

okay

not okay

Watch for oxidation and

damaged pads of the

IO connector

- check for twisted or

bended contacts

- check for dry joints

Clean

IO connector

not okay

okay

Check for dust inside

the IO connector

SCRAP don´t

send back to WSC

Company Confidential

Page 7of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

4 Connector Board to Board

Fault Symptoms

Customer: GRT:

Keyboard malfunction Keyboard malfunction

Keypad illumination does not work Tbd.

Connector Board to Board

Use hot air blower to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z97-C162

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 32100 Keys / Main / No Function

32200 Keys / Main / Reduced Functionality

36000 Keys / Illumination

B to B connector Problems

Check the status of the

BtoB connector visually

okay

not okay

Level 2 Repair

Exchange

BtoB connector

- check for twisted or

bended contacts

- check for dry joints

not okay

okay

Watch for oxidation and

damaged pads of the BtoB

connector

SCRAP don´t

send back to WSC

Company Confidential

Page 8of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

5 Connector Battery

Fault Symptoms

Customer: GRT:

Mobile does not switch on No connection to GRT

Connector BATTERY

Use hot air blower to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z97-C336

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 13000 Battery/Mechanical Damage

Battery connector

Problems

Check the status of the

battery connector visually

okay

not okay

Level 2 Repair

Exchange

Battery connector

- check for twisted or

bended contacts

- check for dry joints

not okay

okay

not okay

Watch for oxidation and

damaged pads of the battery

connector

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

SCRAP don´t

send back to WSC

Company Confidential

Page 9of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

6 IRDA Diode

Fault Symptoms

Customer: GRT:

IRDA does not work Tbd.

Irda Diode

Use hot air blower to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36197-F5008-F492

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 41100 Interfaces / IRDA / No Function

41300 Interfaces / IRDA / Mechanical Damage

IRDA Problems

Check the status of the

IRDA Diode visually

okay

not okay

Level 2 Repair

Exchange

IRDA Diode

not okay

okay

Watch for oxidation and

damaged pads of the IRDA

Diode

- check for dry joints

SCRAP don´t

send back to WSC

Company Confidential

Page 10 of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

7 Connector Display

Fault Symptoms

Customer: GRT:

Display problems, like missing lines or columns on

the LCD or display contrast problems or illumination

problems

Display Problems

Connector Dispaly

Use soldering iron to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z97-C205

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 21000 Display / Performance

22000 Display / Background Illumination

Display Problems

Check the status of the

Display connector visually

okay

not okay

Level 2 Repair

Exchange

Display connecter

- check for twisted or

bended contacts

- check for dry joints

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

not okay

okay

not okay

Watch for oxidation and

damaged pads of the

Display connector

SCRAP don´t

send back to WSC

Andere Handbücher für C65

Inhaltsverzeichnis

Andere Siemens Handy Handbücher

Siemens

Siemens HiPath 4000 Bedienungsanleitung

Siemens

Siemens Milltronics A-40 Bedienungsanleitung

Siemens

Siemens CF75 Bedienungsanleitung

Siemens

Siemens C35 series Bedienungsanleitung

Siemens

Siemens S6 GSM Bedienungsanleitung

Siemens

Siemens C75 Einrichtungshandbuch

Siemens

Siemens Gigaset SL75 WLAN Bedienungsanleitung

Siemens

Siemens A65 Bedienungsanleitung

Siemens

Siemens Gigaset S45 Bedienungsanleitung

Siemens

Siemens ME75 Bedienungsanleitung

Siemens

Siemens ST55 Bedienungsanleitung

Siemens

Siemens S40 Bedienungsanleitung

Siemens

Siemens A70 Bedienungsanleitung

Siemens

Siemens CX70 Bedienungsanleitung

Siemens

Siemens Be inspired M55 Bedienungsanleitung

Siemens

Siemens EF81 Bedienungsanleitung

Siemens

Siemens CF62 Bedienungsanleitung

Siemens

Siemens C25 Bedienungsanleitung

Siemens

Siemens CL50 Bedienungsanleitung

Siemens

Siemens C62 Bedienungsanleitung

Siemens

Siemens M35i Bedienungsanleitung

Siemens

Siemens ST60 Bedienungsanleitung

Siemens

Siemens CL75 Einrichtungshandbuch

Siemens

Siemens PEGASUS-DTC AX72 Bedienungsanleitung

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LG LM-X420QN Bedienungsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung