Siemens FS720 Series Bedienungsanleitung

A6V10207176_h_en_--

2016-05-23

Building Technologies

Control Products and Systems

FC724 Cerberus™PRO

Fire control panel

FS720 series, IP6

κCompact, pre-assembled, microprocessor-controlled fire control panel with

integrated operating unit for up to 504 addresses

κFire control panel can be used as a standalone version or can be networked

κUp to 64 stations – control panels and terminals – can be linked to form a

network

κIntegrated degraded mode function

κRedundant network node, degraded mode operation according to EN 54

κFast Ethernet interface for a heterogeneous network

κIntegrated user-friendly operating unit

κCan be extended by adding printer, key switches, LED indicators

κSlots for RS232 and RS485 serial interfaces

κEmergency power supply for emergency operating time of up to 72 hours

κDetection and automatic reading in (auto-configuration) of all C-NET devices,

ready for operation immediately

κProcesses signals from Cerberus PRO FD720 detector series

κFloor repeater displays, floor repeater operating units, and alarm devices on C-

NET detector line

κFlexible configuration of complex applications and controls

κConfiguration data can be uploaded/downloaded via remote access

κFirmware for all processor-controlled control panel components can be

updated

Building Technologies

Fire Safety

A6V10207176_h_en_--

2016-05-23

System overview

FC10 or XC10

Fire detection or

Extinguishing

control unit

collective

4 (8) loops

max. 504 addresses

C-NET

stub line

FDCI222

4 inputs

4 outputs

24VDC ext.

possible

FDCL221

FDCIO222

FDM22x

FDM221

FDS221/

FDS229

DBS720

OH720

HI722

HI720

OP720

4 inputs

FDCIO221

1 input

1 output

1 input

FDCI221

OH720

24VDC ext.

2 in-/outputs

optionally

Detection line collective Siemens,

Synova SynoLINE300 or

SynoLINE600

FDCIO223

onventional

horn line

via FCI2009-A1

Transmission of an

alarm signal

Transmission of a

fault signal

Fire control panel

Fire controls

FC724

Repeater

FN2002

Cluster

(C-WEB/SAFEDLINK)

Remote access

Engineering Tool,

Operating Tool

FC724

FT724

OP720

Mimic display

FT2001-A1

DBS721 / DBS729

FT2010/FT2011

Floor repeater terminal /

Floor repeater display

Explosion-

hazard area

FDOOT271

Radio detectors

FDM273

FDCW241

FDA221/

FDA241

FDM233-Ex

OOH740-A9-Ex

FDCI723

FDCL221-Ex

Building Technologies

Fire Safety

A6V10207176_h_en_--

2016-05-23

Networking of several fire control panels

Up to 32 control panels and terminals can be linked to form a cluster (C-

WEB/SAFEDLINK network). If the cluster is connected to a danger management

system via BACnet, up to 16 control panels and terminals can be networked.

Siemens Danger

Management System

DL3750+

Matrix printer

RS232

FC722

FT724/FC72x

Cluster

(C-WEB/SAFEDLINK)

16 stations

In-/

Outputs

Ethernet

FC724

Repeater

FN2002

Building Technologies

Fire Safety

A6V10207176_h_en_--

2016-05-23

An optical Ethernet network (C-WEB/LAN) allows up to 14 clusters with up to 16

stations to be operated on one network. A maximum of 64 stations is supported in total.

You will find details of system networking in product data sheet A6V10227649.

Building Technologies

Fire Safety

A6V10207176_h_en_--

2016-05-23

Function features

κThe FC724 is a compact fire control panel with integrated operating unit for

processing signals from FD720 devices.

κThe control panel may be used as a standalone unit or networked.

κThe control panel and the fire detection system are custom-configured using

the Cerberus-Engineering-Tool software.

κAll detector lines are monitored for ground faults.

κCustomer texts can be adapted directly on the operating unit of the control

panel or with the Cerberus-Engineering-Tool software.

κUp to 2000 events can be retrieved from the event memory based on various

criteria.

κAutomatic summer/winter time changeover

κSiemens danger management system can be connected

Function elements

Operating unit

The following elements are available on the operating unit:

– CPU module and electronics

– Ethernet connection

– Slots for RS232 and RS485 modules and network modules (SAFEDLINK)

– Space for 'Kaba' or 'Nordic' key switch

– Space for event printer

– Peripheral data bus connection for optional LED modules

Periphery board

The following elements are available on the periphery board:

– Connection terminals for C-NET lines, remote transmission (alarm, fault), horn

output, configurable control inputs and outputs, monitored alarm and fault output,

emergency supply, power supply

– Two slots for loop extension (C-NET)

Power supply unit 150 W, emergency power supply

The power supply feeds the hardware and charges the batteries.

In the event of a power cut, the batteries provide emergency current.

Housing

A pivoting mounting plate can be fitted for the following elements above the periphery

board on the rear housing panel:

– 1x fire brigade periphery module (for Germany)

– 2x sounder modules (as an alternative to mounting on U-rail TS35)

Configuration

The FXS7212 Cerberus-Engineering-Tool allows the system to be customized.

Building Technologies

Fire Safety

A6V10207176_h_en_--

2016-05-23

Application ranges

The FC724 is ideal for medium-sized applications, e.g. for use in industrial plants,

regional banks, or office complexes.

Thanks to the flexible networking options, the FC724 can also be used for large-scale

sites.

Operation

Each control unit has an integrated operating unit. The control panel can also be

operated via a separate FT724 fire terminal.

You will find details and more information in product data sheet A6V10207898.

Building Technologies

Fire Safety

A6V10207176_h_en_--

2016-05-23

Overview of FC724 fire control panels

Housing (Comfort)

FC724-ZA FC724-ZE

Featuring 48 indicator

groups

with one red/green + one

yellow LED each

4 loops 4 loops

with power supply (150 W) with power supply (150 W)

Max. battery capacity 26

Extensions External printer

FH7202-Z3 FH7203-Z3 FTO2001-A1 DL3750+

Housing (Standard) Housing (Comfort) Event printer Matrix printer (external)

430 x 398 x 183 mm 430 x 796 x 183 mm RS232 interface

Empty housing for free use

For installation in all

control panels

RS232 module must RS232 module must

be ordered separately be ordered separately

Operating accessories

E.g., for extra batteries, FCM7213-Y3 FCM7214-Y3

Operating add-on, or 48 indicator groups with 96 indicator groups with

Event printer one red/green + one

yellow LED each

one red/green + one

yellow LED each

Space for batteries

2x FA2003-A1 (7 Ah) or

2x FA2004-A1 (12 Ah)

E.g., for extra batteries,

Operating add-on, or for retrofitting for retrofitting

Event printer

Space for batteries

2x FA2003-A1 (7 Ah) or

2x FA2004-A1 (12 Ah) or

2x FA2005-A1 (17 Ah) or

2x FA2006-A1 (26 Ah)

Building Technologies

Fire Safety

A6V10207176_h_en_--

2016-05-23

Layout of FC724 inside housing (Comfort)

10 16

25 23

Basic equipment

Designation

Comment

Housing (Comfort) FH7203-Z3 Items 1-6: Basic equipment

Periphery board (2-loop) FCI2002-A1

Power supply (SV 24V-150 W) V24230-Z6-A5

Mains terminals on TS35 DIN rail – Space for socket, relay modules

Operating unit FCM72xx-xx Operating unit with CPU

Card cage (2 slots) FCA2008-A1 For two module bus cards

Space for batteries – 2x 12 V / 17…26 Ah

Building Technologies

Fire Safety

A6V10207176_h_en_--

2016-05-23

Extensions

Designation

Comment

Relay module Z3B171 Relay for fire controls

Event printer FTO2001-A1 For logging events

Key switch (Kaba) FTO2005-C1 For operating access authorization

Key switch (Nordic) FTO2006-B1

Mounting plate FHA2007-A1 E.g., for fire brigade periphery module

Loop extension (C-NET) FCI2003-A1 For extending the number of loops from two to four,

the number of addresses remains the same

Module bus cards

Line card (FDnet/C-NET) FCL2001-A1 For four extra C-NET lines

Line card (SynoLOOP) FCL7201-Z3 For four extra SynoLOOP lines

I/O card (programmable) FCI2008-A1 For twelve configurable inputs/outputs

I/O card (horn/monitored) FCI2009-A1 For eight monitored horn outputs

I/O card (RT) FCI2007-A1 For extra alarm and fault outputs

RS485 module (isolated) FCA2002-A1 For peripheral devices with RS485 interface

RS232 module (isolated) FCA2001-A1 For devices with an RS232 interface

Network module (SAFEDLINK) FN2001-A1 For networking several stations

Repeater (SAFEDLINK) FN2002-A1 For extending the C-WEB system bus, max. 1x

repeater (SAFEDLINK) between two stations

(mounted directly on a plane surface, on a TS35 U-

rail, or in housing FDCH221)

Sounder module FCA2005-A1 For splitting one conventional sounder into four

Battery (12 V, 17 Ah, VDS) FA2005-A1 For the emergency power supply

Battery (12 V, 26 Ah, VDS) FA2006-A1

Fire brigade periphery module FCI2001-D1 for Germany (FBF, FSD, ÜE, FSE, ÖA, KL)

19" mounting kit FHA2016-A1 For installation in 19" third-party housing

License key Sx FCA20xx For special functions

Cable kit (communication) FCA2014-A1 For flexible connections running to the modules on

the operating unit

Power supply kit (150 W, B) FP2005-A1 For extra power supply

Relay module Z3B171 Space for U-rail TS35 L=70 mm for max. 4 relay

modules

FM blind 2HE FHA2015-A1 for recessed mounting of housings

Building Technologies

Fire Safety

A6V10207176_h_en_--

2016-05-23

Technical data

Mains voltage AC 115/230 V +10/-15 %

Power supply 150 W

Operating voltage DC 21…28.4 V

Operating current Max. 5 A

Battery capacity 2x 12 V, 26 Ah

Battery monitoring Yes

Network monitoring Yes

Connectable detector series Cerberus PRO FD720 (C-NET)

Number of lines

–Loops (with loop extension) or

–Stubs

4 (8)

8 (16)

Number of addresses Max. 504

Integrated inputs/outputs

–Relay output

–RT alarm

–RT fault

–Monitored outputs

–Alarm

–Fault

–Horn

–Freely programmable inputs/outputs

Operating unit Integrated

Slots for RS232, RS485 serial ports 2

Slots for network modules 2

Slots for loop extension 2

Mounting spaces for cable kit (communication) 2

Sounder module Max. 2

Ethernet port RJ45 1

Operating temperature -8…+42 °C

Storage temperature -20…+60 °C

Air humidity (no condensation permitted) ≤95 % rel.

Dimensions (W x H x D)

–Without cover cap

–With cover cap

430 x 796 x 160 mm

430 x 796 x 183 mm

Color

–Housing

–Cover cap

~RAL 7035, light gray

~RAL 000 50 00

Protection category (IEC 60529) IP30

Approvals

–VdS

–LPCB

–FM

–DNV GL (Marine)

G209077

126bn/07

3051081

See document A6V10339425

Andere Handbücher für FS720 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Bedienfeld Handbücher

Siemens

Siemens IC60W-10 Bedienungsanleitung

Siemens

Siemens SINUMERIK 802D sl Bedienungsanleitung

Siemens

Siemens SIMATIC OEM PP32 Technisches Dokument

Siemens

Siemens P5 Bedienungsanleitung

Siemens

Siemens IVK-6 Bedienungsanleitung

Siemens

Siemens OP5 Technisches Dokument

Siemens

Siemens FC121-ZA Bedienungsanleitung

Siemens

Siemens SIMATIC WinCC flexible 2008 SP4 Benutzerhandbuch

Siemens

Siemens CERBERUS PYROTRONICS PXL Bedienungsanleitung

Siemens

Siemens FC2005 Bedienungsanleitung

Siemens

Siemens SINAMICS BOP-2 Bedienungsanleitung

Siemens

Siemens Cerberus PYROTRONICS MXL Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D sl Technisches Dokument

Siemens

Siemens SXL-EX Bedienungsanleitung

Siemens

Siemens Synco RMZ792 Bedienungsanleitung

Siemens

Siemens MJ-X Bedienungsanleitung

Siemens

Siemens QAX903 Bedienungsanleitung

Siemens

Siemens SINAMICS G130 Bedienungsanleitung

Siemens

Siemens MTP700 Unified Comfort Administratorhandbuch

Siemens

Siemens FC2005 Bedienungsanleitung

Siemens

Siemens simatic hmi op7 Technisches Dokument

Siemens

Siemens CP-2ER Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D sl Bedienungsanleitung

Siemens

Siemens SCD 1297-K (33) Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten