Siemens FDCI723 Bedienungsanleitung

A6V10402143_f_en_-- Building Technologies

2018

Control Products and Systems

Cerberus™ PRO

Zone module, external powered

FDCI723

Zone module, external powered, addressed for detector line C

NET.

●Detector line (collective or conventional 110 series, DS11, SynoLINE300/600)

●LED indicator for detector line status: fault, test, etc.

●Two-wire installation for all cable types

●DC 24 V power supply, external, tested to EN 54-4 (detector lines electrically

isolated)

●Microprocessor-controlled signal processing

●Communication via C-NET (addressed individually)

●Can be used in dry, dusty, and humid areas

●Different mounting options

Building Technologies A6V10402143_f_en_--

Fire Safety 2018-10-03

Properties

Eco-friendly

●Environmentally friendly processing

●Reusable materials

●Electronic parts and synthetic materials can be easily separated

Features

●Transparent housing, ensuring that LED indicators are easy to see

●Protected electronics

●Integrated line separator

●Easy mounting using snap fastener

●Can be used in dry areas

●Housing FDCH221 can be used in dusty and humid environments.

Use

For connecting to collective or conventional fire detectors (with safety barrier SB3 for areas

at risk of explosion).

1 Connections for the C-NET detector line 4 Detector line input connections

Max. 32 detectors per line

2 C-NET detector line 5 Contact input

3 External supply DC 24 V 6 Jumper for activation/deactivation of

ground fault monitoring

Building Technologies A6V10402143_f_en_--

Fire Safety 2018-10-03

NOTICE

Country

specific safety regulations

Failure to observe country-specific safety regulations can cause injury to persons and

damage to property.

●Observe country-specific regulations and comply with the corresponding safety

directives.

Functions

The detector line parameters can be set for:

●Collective detector line 110 series, DS11, SynoLINE600

●Conventional detector line SynoLINE300

●Collective detector line DS11, Ex with safety barrier SB3

Detector line is monitored for:

●Quiet, alarm, open line, short-circuit, fault, and ground fault

Status display by means of LED.

Type Overview

Type Designation Order no. Weight [kg]

FDCI723 Zone module, external powered S54322-F6-A1 0.106

Accessories

Type Designation Order no. Weight [kg]

FDCH221 Housing with cover, seal, and screws S54312-F3-A1 0.282

– Metal cable gland M20 x 1.5 A5Q00004478 0.036

– M20 metal counter nut A5Q00004479 0.006

FDCM291 Mounting foot A5Q00003855 0.001

DBZ1190-AB 0.5...2.5 mm2(3-pin) connection terminal BPZ:4942340001 0.001

Product documentation

Document ID Name

A6V10229261 List of compatibility (for 'Cerberus™ PRO' product line)

A6V10414910 Technical manual Zone module, external powered FDCI723

001204 Principles, applications, installation, maintenance Fire alarm signal in areas at risk of

explosion

Related documents such as the environmental declarations, CE declarations, etc., can be

downloaded from the following Internet address:

https://siemens.com/bt/download

Building Technologies A6V10402143_f_en_--

Fire Safety 2018-10-03

Notes

Mounting

●Mounting on U-rail TS35 (series mounting)

●In housing FDCH221 with cover, seal, and screws

1 Series mounting using mounting feet supplied, on U-rail TS35

2 Mounting in separate housing FDCH221 (accessory)

3 Use auxiliary terminals DBZ1190-AB (accessory) for shielded cables

Disposal

The device is considered an electronic device for disposal in accordance

with the European Guidelines and may not be disposed of as domestic

garbage.

●Dispose of the device through channels provided for this purpose.

●Comply with all local and currently applicable laws and regulations.

Building Technologies A6V10402143_f_en_--

Fire Safety 2018-10-03

Technical data

FDCI723

C-NET operating voltage DC 12…33 V

External power supply

●Operating voltage

Tested to EN 54-4

DC 18...32 V

Collective detector line

●Collective line code (KLK)

●End-of-line (EOL)

20 V voltage reference diode or EOL22 (Ex)

Operating temperature -20...+55 °C

Storage temperature -30...+70 °C

Air humidity, non-condensing ≤95 % rel.

Communication protocol C-NET

Pluggable connection terminals 0.2…1.5 mm2

Color

●Input/output module rack, back box

●Cover cap, housing cover

~RAL 9010, pure white

Transparent matt

EN 60529 / IEC 60529 protection category

●Without housing

●With housing FDCH221

IP30

IP65

Standards EN 54-17, EN 54-18

Approvals

●VdS

●LPCB

G215004

Compatibility See 'List of compatibility'

Building Technologies A6V10402143_f_en_--

Fire Safety 2018-10-03

Issued by

Siemens Switzerland Ltd

Building Technologies Division

International Headquarters

Theilerstrasse 1a

CH-6300 Zug

Tel. +41 58 724 2424

www.siemens.com/buildingtechnologies

Technical specifications and availability subject to change without notice.

Document ID A6V10402143_f_en_--

Edition 2018-10-03

Dimensional drawings

Zone module, external powered FDCI723

102

Housing FDCH221

119

0786

Siemens Schweiz AG, Theilerstrasse 1a

CH-6300 Zug

Technical data: see doc.

A6V10414910

The declared performance and conformity can be seen in the Declaration of Performance (DoP) and the EU Declaration of Conformity (DoC),

which is obtainable via the Customer Support center: Tel. +49 89 9221-8000 or https://siemens.com/bt/download

FDCI723 - Input/output device incl. short-circuit isolator for use in fire detection and fire alarm systems installed in buildings.

305/2011/EU (CPR): EN 54-17 / EN 54-18 ; 2014/30/EU (EMC): EN 50130-4 / EN 61000-6-3 ; 2011/65/EU (RoHS): EN 50581

DoP No.: 0786-CPR-21423; DoC No.: CED-FDCI723

FDCI723

Dieses Handbuch passt für folgende Modelle

Andere Siemens Steuereinheit Handbücher

Siemens

Siemens SITRANS FM MAG 8000 IIoT Bedienungsanleitung

Siemens

Siemens DMS8000 MP4 Series Bedienungs- und Wartungsanleitung

Siemens

Siemens SINUMERIK 840D sl Merkblatt

Siemens

Siemens Simatic S7-1500 Stücklistenhandbuch

Siemens

Siemens DESIGO PXM20 Bedienungsanleitung

Siemens

Siemens 599-06611 Betriebsanleitung

Siemens

Siemens Simatic S5 IP 240 Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D sl Stücklistenhandbuch

Siemens

Siemens SINAMICS V20 Inverter Bedienungsanleitung

Siemens

Siemens SINAMICS DCM Datenblatt

Siemens

Siemens Simatic S7-400 Bedienungsanleitung

Siemens

Siemens FCA2018-U1 Bedienungsanleitung

Siemens

Siemens SIMOTICS CONNECT 600 Bedienungsanleitung

Siemens

Siemens SIMATIC Bedienungsanleitung

Siemens

Siemens SM 338 Bedienungsanleitung

Siemens

Siemens SIMATIC Technisches Dokument

Siemens

Siemens SINUMERIK 840D Betriebsanleitung

Siemens

Siemens SIMATIC Bedienungsanleitung

Siemens

Siemens SIDOOR AT40 Benutzerhandbuch

Siemens

Siemens SINUMERIK 880 Betriebsanleitung

Siemens

Siemens PM240 Montageanleitung

Siemens

Siemens SINUMERIK 840C Einrichtungshandbuch

Siemens

Siemens MICROMASTER 411 Bedienungsanleitung

Siemens

Siemens RAB10 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung