Siemens Modem Block Bedienungsanleitung

INTRODUCTION The SIEMENS Modem Block module is a component of the HUB-4 assembly. Each

Modem Block module provides 1 independent data channel.The HUB-4 can support

up to 4 independent data channels.The Modem Block module mounts on the HUB-4,

COM-2 board, which in turn mounts on the HUB -4 Main-2 board. Refer to the table

below to determine the required modules for the desired configuration.

TABLE 1

HUB-4 CONFIGURATION

Number of

Channels Required Modules

1 1 HUB-4 Main-2, 1 HUB-4 COM-2, 1 Modem Block

2 1 HUB-4 Main-2, 1 HUB-4 COM-2, 2 Modem Blocks

3 1 HUB-4 Main-2, 2 HUB-4 COM-2, 3 Modem Blocks

4 1 HUB-4 Main-2, 2 HUB-4 COM-2, 4 Modem Blocks

PRE-INSTALLATION The Modem Block module has three configuration jumpers: JP1, JP2, and JP3. Refer

to Figure 1 for the location of the jumpers. Set the jumpers to the configuration

shown in Table 2.

NOTE:

"ON" IS WHEN THE JUMPER

IS IN THE PROPER POSITION

OVER PLUGS JP1, JP2, OR JP3.

JP2 JP3

JP1

MODEM BLOCK

Figure 1

Module Block Module

Installation Instructions

Model Modem Block

Modem Block Module For HUB-4

Siemens Building Technologies

Fire Safety

P/N 315-099356-2

TABLE 2

MODEM BLOCK

JUMPER SETTINGS

JP1 ON

JP2 OFF

JP3 OFF

INSTALLATION

Disconnect BATTERY and AC prior to working on equipment.

Mounting Each Modem Block module mounts to a HUB-4, COM-2 with the 3 nylon spacers, 3

nylon screws, and 3 nylon washers provided. One HUB-4, COM-2 board can accom-

modate up to 2 Modem Block modules.

1. To begin mounting a Modem Block module on a HUB-4, COM-2 board,

place the screw end of the 3 spacers through the holes in the top of the

COM-2 board. (Refer to Figure 2.)

2. Secure the spacers in place on the underside of the HUB-4, COM-2 with

the 3 nylon nuts.

3. DO NOT place the Modem Block module on the HUB-4, COM-2 board at

this time. Reserve the 3 nylon screws provided.

4. Refer to the HUB -4 Installation Instructions, P/N 315-099458, to complete

the installation.

HOLES FOR

MOUNTING

NYLON SPACERS

HOLES FOR

MOUNTING

NYLON SPACERS

PLACE SCREW

END OF SPACER

THROUGH HOLE

IN HUB-4, COM-2

2X10PIN

RECEPTACLE

2X10PIN

RECEPTACLE

MOUNTS ONE

MODEM BLOCK

MODULE

MOUNTS ONE

MODEM BLOCK

MODULE

HUB-4,

COM-2

Figure 2

Placing Nylon Spacers For Modem Block Module On HUB-4, COM-2 Board

Siemens Building Technologies, Inc.

8 Fernwood Road

Florham Park, New Jersey 07932

Siemens Building Technologies, Ltd.

2 Kenview Boulevard

Brampton, Ontario L6T 5E4 CN P/N 315-099356-2

Inhaltsverzeichnis

Andere Siemens Steuereinheit Handbücher

Siemens

Siemens Simatic S7-400 Bedienungsanleitung

Siemens

Siemens SIPROTEC 7SJ80 Bedienungsanleitung

Siemens

Siemens SIPROTEC4 7SJ61 Bedienungsanleitung

Siemens

Siemens 3SB5 Bedienungsanleitung

Siemens

Siemens FM 458-1 DP Bedienungsanleitung

Siemens

Siemens PS-35 Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens SINUMERIK 808D Bedienungsanleitung

Siemens

Siemens ACVATIX VPF43 Series Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens CB15 Bedienungsanleitung

Siemens

Siemens SIMATIC S7-300 FM 350-1 Bedienungsanleitung

Siemens

Siemens 6SE7024-1EP85-0AA1 Bedienungsanleitung

Siemens

Siemens Siwarex U Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D sl Kurzanleitung

Siemens

Siemens SIMOTION Stücklistenhandbuch

Siemens

Siemens Siwarex U Anwendungshandbuch

Siemens

Siemens VAI61 Series Bedienungsanleitung

Siemens

Siemens SINAMICS G120P CU230P-2 Administratorhandbuch

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D sl Stücklistenhandbuch

Siemens

Siemens 6SE7022-0ES87-2DC0 Gebrauchsanweisung

Siemens

Siemens SINUMERIK 840Di sl Stücklistenhandbuch

Siemens

Siemens SINUMERIK 840D Simodrive 611 digital Benutzerhandbuch

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung