Siemens CLS-1000 Gebrauchsanweisung

PRINTED IN U.S.A.

INSTRUCTION & MAINTENANCE

MODEL CLS-1000

COLOR LIGHT SIGNAL

FEBRUARY 2023

DOCUMENT NO. SIG-00-21-05

VERSION A

Siemens Mobility, Inc.

One Penn Plaza

Suite 1100

New York, NY 10119-1101

1-800-793-SAFE

www.usa.siemens.com/rail-manuals

SIG-00-21-05 FEBRUARY 2023

Version No.: A

PROPRIETARY INFORMATION

The material contained herein constitutes proprietary and confidential information and is the

intellectual property of Siemens Mobility, Inc. (Siemens) protected under United States patent,

software it describes are for authorized use only, and may not be: (i) modified, translated,

reverse engineered, decompiled, disassembled, or used to create derivative works; (ii) copied or

reproduced for any reason other than specific application needs; or (iii) rented, leased, lent,

sublicensed, distributed, remarketed, or in any way transferred; without the prior written

authorization of Siemens. This proprietary notice and any other associated labels may not be

removed.

TRANSLATIONS

The manuals and product information of Siemens Mobility, Inc. are intended to be produced and

read in English. Any translation of the manuals and product information is unofficial and can be

imprecise and inaccurate in whole or in part. Siemens Mobility, Inc. does not warrant the

accuracy, reliability, or timeliness of any information contained in any translation of manual or

product information from its original official released version in English and shall not be liable for

any losses caused by such reliance on the accuracy, reliability, or timeliness of such

information. Any person or entity that relies on translated information does so at his or her own

risk.

WARRANTY INFORMATION

Siemens Mobility, Inc. warranty policy is as stated in the current Terms and Conditions of Sale

document. Warranty adjustments will not be allowed for products or components which have

been subjected to abuse, alteration, improper handling or installation, or which have not been

operated in accordance with Seller's instructions. Alteration or removal of any serial number or

identification mark voids the warranty.

SALES AND SERVICE LOCATIONS

Technical assistance and sales information on Siemens Mobility, Inc. products may be obtained

at the following locations:

SIEMENS MOBILITY, INC.

2400 NELSON MILLER PARKWAY

939 S. MAIN STREET

LOUISVILLE, KENTUCKY 40223

MARION, KENTUCKY 42064

TELEPHONE: (502) 618-8800 TELEPHONE: (270) 918-7800

FAX:

(502) 618-8810

CUSTOMER SERVICE:

(800) 626-2710

SALES & SERVICE:

(800) 626-2710

TECHNICAL SUPPORT:

(800) 793-7233

WEB SITE:

www.usa.siemens.com/rail-manuals

FAX:

(270) 918-7830

FCC RULES COMPLIANCE

The equipment covered in this manual has been tested and found to comply with the limits for

Class A digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be required to correct the

interference at his/her own expense.

iii

SIG-00-21-05 FEBRUARY 2023

Version No.: A

DOCUMENT HISTORY

Version Release

Date Sections

Changed Details of Change

A FEB 2023 Initial Release

SIG-00-21-05 FEBRUARY 2023

Version No.: A

TABLE OF CONTENTS

Section Title Page

PROPRIETARY INFORMATION.............................................................................................................ii

TRANSLATIONS.....................................................................................................................................ii

WARRANTY INFORMATION ..................................................................................................................ii

SALES AND SERVICE LOCATIONS.......................................................................................................ii

FCC RULES COMPLIANCE....................................................................................................................ii

DOCUMENT HISTORY...........................................................................................................................iii

NOTES, CAUTIONS, ANDWARNINGS.................................................................................................vii

ELECTROSTATIC DISCHARGE (ESD) PRECAUTIONS.......................................................................viii

GLOSSARY ...........................................................................................................................................ix

1INTRODUCTION...........................................................................................................................1-1

1.1 Ordering Information...............................................................................................................1-2

1.1.1 Mounting Brackets...................................................................................................1-3

1.1.2 Lenses....................................................................................................................1-4

1.1.3 Visors......................................................................................................................1-5

1.1.4 LED Modules...........................................................................................................1-6

1.1.4.1 Dialight Modules......................................................................................................1-6

2MAINTENANCE............................................................................................................................2-1

2.1 LED Alignment .......................................................................................................................2-1

2.2 Lens Replacement..................................................................................................................2-2

2.3 LED Replacement ..................................................................................................................2-2

3REPLACEMENT PARTS...............................................................................................................3-1

3.1 Dialight LED Support Bracket Replacement Parts...................................................................3-3

SIG-00-21-05 FEBRUARY 2023

Version No.: A

LIST OF FIGURES

Section Title Page

Figure 1-1 CLS-1000 Color Light Signal..............................................................................................1-1

Figure 1-2 Mounting Bracket Options..................................................................................................1-3

Figure 1-3 Visor Options.....................................................................................................................1-5

Figure 1-4 Dialight LED Module Dimensions.......................................................................................1-6

Figure 2-1 LED Alignment...................................................................................................................2-1

Figure 3-1 Replacement Parts Location..............................................................................................3-2

Figure 3-2 LED Support Bracket Replacement Parts Location.............................................................3-3

SIG-00-21-05 FEBRUARY 2023

Version No.: A

LIST OF TABLES

Section Title Page

Table 1-1 Mounting Bracket Part Numbers..........................................................................................1-3

Table 1-2 Lens Part Numbers.............................................................................................................1-4

Table 1-3 Visor Part Numbers.............................................................................................................1-5

Table 1-4 Dialight LED Module Part Numbers.....................................................................................1-6

Table 3-1 Replacement Parts .............................................................................................................3-1

Table 3-2 Dialight LED Support Bracket Replacement Parts ...............................................................3-3

vii

SIG-00-21-05 FEBRUARY 2023

Version No.: A

NOTES, CAUTIONS, AND WARNINGS

Throughout this manual, notes, cautions, and warnings are frequently used to direct the reader’s

attention to specific information. Use of the three terms is defined as follows:

WARNING

INDICATES A POTENTIALLY HAZARDOUS SITUATION THAT, IF

NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS

INJURY. WARNINGS ALWAYS TAKE PRECE

DENCE OVER

NOTES, CAUTIONS, AND ALL OTHER INFORMATION.

CAUTION

REFERS TO PROPER PROCEDURES OR PRACTICES WHICH IF

NOT STRICTLY OBSERVED, COULD

RESULT IN A POTENTIALLY

HAZARDOUS SITUATION AND/OR POSSIBLE DAMAGE TO

EQUIPMENT. CAUTIONS TAKE PRECEDENCE OVER NOTES

AND ALL OTHER INFORMATION, EXCEPT WARNINGS.

NOTE

Generally used to highlight certain information relating to the topic

under discussion.

If there are any questions, contact Siemens Industry, Inc. Application Engineering.

viii

SIG-00-21-05 FEBRUARY 2023

Version No.: A

ELECTROSTATIC DISCHARGE (ESD) PRECAUTIONS

Static electricity can damage electronic circuitry, particularly low voltage components such as the

integrated circuits commonly used throughout the electronics industry. Therefore, procedures

have been adopted industry-wide which make it possible to avoid the sometimes invisible

damage caused by electrostatic discharge (ESD) during the handling, shipping, and storage of

electronic modules and components. Siemens Industry, Inc. has instituted these practices at its

manufacturing facility and encourages its customers to adopt them as well to lessen the likelihood

of equipment damage in the field due to ESD. Some of the basic protective practices include the

following:

•Ground yourself before touching card cages, assemblies, modules, or components.

•Remove power from card cages and assemblies before removing or installing modules.

•Remove circuit boards (modules) from card cages by the ejector lever only. If an ejector lever is

not provided, grasp the edge of the circuit board but avoid touching circuit traces or components.

•Handle circuit boards by the edges only.

•Never physically touch circuit board or connector contact fingers or allow these fingers to come in

contact with an insulator (e.g., plastic, rubber, etc.).

•When not in use, place circuit boards in approved static-shielding bags, contact fingers first.

Remove circuit boards from static-shielding bags by grasping the ejector lever or the edge of the

board only. Each bag should include a caution label on the outside indicating static-sensitive

contents.

•Cover workbench surfaces used for repair of electronic equipment with static dissipative

workbench matting.

•Use integrated circuit extractor/inserter tools designed to remove and install electrostatic-

sensitive integrated circuit devices such as PROM’s (OK Industries, Inc., Model EX-2 Extractor

and Model MOS-40 Inserter (or equivalent) are highly recommended).

•Utilize only anti-static cushioning material in equipment shipping and storage containers.

For information concerning ESD material applications, please contact the Technical Support Staff

at 1-800-793-7233. ESD Awareness Classes and additional ESD product information are also

available through the Technical Support Staff.

SIG-00-21-05 FEBRUARY 2023

Version No.: A

GLOSSARY

TERM DESCRIPTION

AREMA

American Railway Engineering and Maintenance-of-way

Association - An organization that promotes the development

and advancement of both technical and practical knowledge

and recommended practices pertaining to the design,

construction, and maintenance of railway infrastructure.

LCL

Light Center Length - The distance between the center of the

filament, or arc tube, and a reference plane, usually the bottom

of the lamp base.

SIG-00-21-05 FEBRUARY 2023

Version No.: A

This Page Intentionally Left Blank

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Steuereinheit Handbücher

Siemens

Siemens SITRANS F Bedienungsanleitung

Siemens

Siemens DESIGO PXM20 Bedienungsanleitung

Siemens

Siemens FN2013-U1 Bedienungsanleitung

Siemens

Siemens FMT-A-ADPT Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP F-AI 4xI 0(4) 20mA 2-/4-wire HF... Bedienungsanleitung

Siemens

Siemens SITRANS RD500 Bedienungsanleitung

Siemens

Siemens OCC-1 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens Siwarex U Bedienungsanleitung

Siemens

Siemens SENTRON ATC6500 Bedienungsanleitung

Siemens

Siemens SIMATIC PRO Extension Units KP Series Bedienungsanleitung

Siemens

Siemens SINAMICS S120 Bedienungsanleitung

Siemens

Siemens SIMATIC NET MM900 Series Administratorhandbuch

Siemens

Siemens SINAMICS G130 Bedienungsanleitung

Siemens

Siemens SIMATIC 6DL1131-6DF00-0PK0 Technisches Dokument

Siemens

Siemens simovert masterdrives Bedienungsanleitung

Siemens

Siemens SED2-MODBUS2 Betriebsanleitung

Siemens

Siemens ALD-2I Bedienungsanleitung

Siemens

Siemens NIM-1M Bedienungsanleitung

Siemens

Siemens FDK:521H1134 Bedienungsanleitung

Siemens

Siemens WF 705 Bedienungs- und Montageanleitung

Siemens

Siemens SIMATIC 8DO DC24V/0.5 A Bedienungsanleitung

Siemens

Siemens SIMOTION D4 5-2 Series Bedienungsanleitung

Siemens

Siemens SIMOTION TM15 Kurzanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung