Siemens SIMATIC ET 200SP Bedienungsanleitung

DI 8x24VDC ST digital input module

(6ES7131-6BF00- 

0BA0)

_________________

_____

____________

_________________

SIMATIC

ET 200SP

DI 8x24VDC ST digital input module

(6ES7131-6BF00-0BA0)

Manual

03/2012

A5E03574157-01

Preface

Documentation guide

Product overview

Connecting

Parameter

assignment/addressing

Interrupt, error and system

messages

Technical specifications

Parameter data record

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

CAUTION

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

NOTICE

indicates that an unintended result or situation can occur if the relevant information is not taken into account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Industry Sector

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E03574157-01

Ⓟ 03/2012 Technical data subject to change

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

Manual, 03/2012, A5E03574157-01 3

Preface

Purpose of the documentation

This device manual complements the system manual ET 200SP Distributed I/O System.

General functions of the ET 200SP are described in the system manual ET 200SP

distributed I/O system (http://support.automation.siemens.com/WW/view/en/58649293).

The information provided in this device manual and the system manual enables you to

commission the ET 200SP system.

Preface

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

4 Manual, 03/2012, A5E03574157-01

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

Manual, 03/2012, A5E03574157-01 5

Table of contents

Preface ...................................................................................................................................................... 3

1 Documentation guide................................................................................................................................. 7

2 Product overview ....................................................................................................................................... 9

2.1 Properties of the DI 8x24VDC ST..................................................................................................9

3 Connecting .............................................................................................................................................. 11

3.1 Terminal assignment....................................................................................................................11

3.2 Schematic circuit diagram............................................................................................................12

4 Parameter assignment/addressing .......................................................................................................... 13

4.1 Parameters...................................................................................................................................13

4.2 Declaration of parameters............................................................................................................14

4.3 Address space .............................................................................................................................14

5 Interrupt, error and system messages ..................................................................................................... 15

5.1 Status and error displays .............................................................................................................15

5.2 Diagnostic messages...................................................................................................................17

6 Technical specifications........................................................................................................................... 19

6.1 Technical specifications ...............................................................................................................19

A Parameter data record............................................................................................................................. 21

A.1 Parameter assignment and structure of parameter data record..................................................21

Table of contents

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

6 Manual, 03/2012, A5E03574157-01

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

Manual, 03/2012, A5E03574157-01 7

Documentation guide 1

Introduction

The following paragraph gives you an overview of the additional documentation you need to

use the DI 8×24VDC ST digital input module.

Documentation for the ET 200SP distributed I/O system with DI 8×24VDC ST digital input module





%DVH8QLWV

(763

Figure 1-1 Example of a system structure

Table 1- 1 Documentation for the ET 200SP distributed I/O system with DI 8×24VDC ST digital

input module

Number Component Documentation Most important contents

① System ET 200SP distributed I/O system

(http://support.automation.siemens.com

/WW/view/en/58649293) system

manual

Application planning

Installation

Connecting

Commissioning

② BaseUnits Device manual ET 200SP BaseUnits

(http://support.automation.siemens.com

/WW/view/en/58532597/133300)

Technical specifications

Documentation guide

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

8 Manual, 03/2012, A5E03574157-01

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

Manual, 03/2012, A5E03574157-01 9

Product overview 2

2.1 Properties of the DI 8x24VDC ST

Order number

6ES7131-6BF00-0BA0

View of the module

Figure 2-1 View of the DI 8×24VDC ST module

Product overview

2.1 Properties of the DI 8x24VDC ST

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

10 Manual, 03/2012, A5E03574157-01

Properties

● Technical properties

– Digital input module with 8 inputs

– Supply voltage L+

– Sink Input (PNP, P-reading)

– Suitable for connection of switches and 2-wire sensors in accordance with IEC 61131,

type 3

– Channel-by-channel programmable input delay 0.05 ms to 20 ms

– Module-based programmable diagnostics

● Supported functions

– I&M identification data

– Firmware update

– Configuration in RUN

Accessories

The following components can be used with the module:

● Labeling strips

● Color identification labels

● Reference identification label

● Shield connector

Andere Handbücher für SIMATIC ET 200SP

101

Inhaltsverzeichnis

Andere Siemens Steuereinheit Handbücher

Siemens

Siemens SINAMICS G120 Bedienungsanleitung

Siemens

Siemens Climatix POL822 Bedienungsanleitung

Siemens

Siemens Synco RMZ792 Bedienerhandbuch

Siemens

Siemens 6MB5110-1 Bedienungsanleitung

Siemens

Siemens MC35 Terminal Bedienungsanleitung

Siemens

Siemens VALVEGYR LDU11.323A17 Bedienungsanleitung

Siemens

Siemens 7SC80 Bedienungsanleitung

Siemens

Siemens LOGO! CIM Bedienungsanleitung

Siemens

Siemens SIRIUS 3RA2712 Technisches Dokument

Siemens

Siemens SINUMERIK 840D sl Bedienungsanleitung

Siemens

Siemens SIMATIC IM 151/CPU Bedienungsanleitung

Siemens

Siemens SIMOTION SCOUT Merkblatt

Siemens

Siemens SINAMICS V20 Inverter Bedienungsanleitung

Siemens

Siemens SIRIUS 3RA2130-4 A3 Series Bedienungsanleitung

Siemens

Siemens Simatic Net Scalance M812 Bedienungsanleitung

Siemens

Siemens FDCL221-M Bedienungsanleitung

Siemens

Siemens SINUMERIK 840Di sl Bedienungsanleitung

Siemens

Siemens SIRIUS ACT 3SU1400-1GC10-1AA0 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SCALANCE S615 Bedienungsanleitung

Siemens

Siemens SIMOTION D425 Bedienungsanleitung

Siemens

Siemens Simatic S5 IP 240 Bedienungsanleitung

Siemens

Siemens PSO+ Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP CM 1xDALI Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung