Siemens SIMATIC IM 178-4 Bedienungsanleitung

Preface, Contents

Part 1: User Information

Product Overview 1

Installing and Removing the

Module 2

Wiring 3

Parameter Assignment 4

Preparing for Startup 5

Part 2: Reference Section

Functions of the IM 178-4 6

Diagnostics 7

Appendix

Technical Specifications A

Configuration and

Parameter Assignment

Frame for the IM 178-4 B

Glossary, Index

IM 178-4

Manual

This manual is part of the product

with order number:

6ES7 178-4BH00-0AE0

SIMATIC

Index-2 IM178-4

C79000-G7076-C178-01

!Danger

indicatesthatdeath,severepersonalinjuryorsubstantialpropertydamagewill resultif proper

precautionsare nottaken.

!Warning

indicatesthatdeath,severepersonalinjuryorsubstantialpropertydamagecan resultifproperprecau-

tions are not taken.

!Caution

indicatesthat minor personal injury or propertydamage can result if proper precautionsare not taken.

Note

drawsyourattentiontoparticularlyimportantinformationontheproduct,handlingtheproduct,ortoa

particularpartofthedocumentation.

Qualified Personnel

Only qualifiedpersonnel should be allowed to install and work on this equipment. Qualified persons are

definedas persons who are authorized tocommission, to ground, and to tagcircuits, equipment, and

systems in accordance with established safety practices and standards.

Correct Usage

Notethefollowing:

!Warning

This device may only be used for the applications described in the catalog or the technical description,

andonly in connection with devices or componentsfrom other manufacturers which have been approved

orrecommendedbySiemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed

correctly,andoperatedand maintainedasrecommended.

Trademarks SIMATICR, SIMATIC HMIRand SIMATIC NETRare registered trademarks of SIEMENS AG.

Third parties using for their own purposes any other names in this document which refer to trademarks

mightinfringeupontherightsofthetrademarkowners.

Safety Guidelines

This manual contains notices which you should observe to ensure your own personal safety, as well as to

protectthe product and connected equipment. These notices are highlighted in the manual by a warning

triangle and are marked as follows according to the level of danger:

We have checked the contents of this manual for agreement with the

hardware and software described. Since deviations cannot be precluded

entirely, we cannot guarantee full agreement. However, the data in this

manual are reviewed regularly and any necessary corrections included in

subsequent editions. Suggestions for improvement are welcomed.

The reproduction, transmission or use of thisdocument or itscontents isnot

permitted without express written authority. Offenders will be liable for

damages.Allrights,including rightscreatedbypatentgrantor registrationof

a utility model or design, are reserved.

Siemens AG

Bereich Automatisierungs- und Antriebstechnik

Geschaeftsgebiet Industrie Automatisierungssystem

Postfach 4848, D- 90327 Nuernberg ESiemensAG 1998

Subject to change without prior notice.

SiemensAktiengesellschaft C79000-G7076-C178

iii

IM178-4

C79000-G7076-C178-01

Preface

Purpose of the Documentation

This manual describes all the steps necessary to use the function module

IM 178-4. It will help you to become familiar with the functions of the IM 178-4

quickly and effectively.

Content of the Manual

This manual describes the hardware and software of the IM 178-4. It deals with the

following topics:

SProduct overview

SInstallation and removal of the module

SWiring

SParameter assignment

SStarting up

SFunctions

SDiagnostics

SAppendix

Audience

The manual is intended for the following audience:

SFitters

SProgrammers

SCommissioning engineers

SService and maintenance personnel

Applicability of the Manual

This manual contains the description of the function module IM 178-4 valid at the

time of publication. We reserve the right to describe modifications in the

functionality of the IM 178-4 in a Product Information leaflet.

Preface

iv IM178-4

C79000-G7076-C178-01

Finding Your Way in the Manual

To help you find specific information quickly, the manual includes the following :

SAt the start of the manual, you will find a complete table of contents.

SIn the Appendix, you will find a glossary in which the most important

terminology used in the manual is explained.

SAt the end of the manual, you will find a comprehensive index with which you

can locate topics and specific information quickly.

Other Literature Required

To understand this manual, you should also be familiar with the manual

ET 200

Distributed I/O System

Standards

The S7-300 programmable controller complies with the standard IEC 1131.

Recycling and Disposal

The SIMATIC S7-300 is an environmentally friendly product!

The SIMATIC S7-300 has the following environmental features:

SPlastic casing highly fireproof despite halogen–free flame protection

SLabeled by laser (in other words no unnecessary labels)

SPlastic materials indicated in compliance with DIN 54840

SLess material used due to small dimensions, less components due to

integration in ASICs

The SIMATIC S7-300 is suitable for recycling due to its low pollutant content .

For environmentally friendly recycling and disposal of your old SIMATIC PLC using

the most modern methods, contact:

Siemens Aktiengesellschaft

Anlagenbau und Technische Dienstleistungen

ATD TD 3 Kreislaufwirtschaft

Postfach 32 40

D-91050 Erlangen

Germany

Phone: ++49 / 91 31 / 73 36 98

Telefax: ++ 49 / 91 31 / 72 66 43

This Siemens department offers individual counseling and a comprehensive and

flexible disposal system at a fixed price. Following disposal, you receive a

breakdown of the materials and a certification of the materials.

Preface

IM178-4

C79000-G7076-C178-01

You can also order the entire SIMATIC S7 documentation on a CD-ROM.

Further Support

If you have questions about using the product described in the manual and cannot

find the answer here, please contact your local Siemens representative. You will

find the addresses in the appendix ”SIEMENS Worldwide” in the

”S7-300, M7-300

Programmable Controller, Hardware and Installation, CPU Data”

manual

If you have questions or comments about the manual itself, please complete the

reply card at the end of the manual and send it to address shown. Please take a

few minutes to give your own personal assessment of the manual on the reply

card.

To familiarize users with the SIMATIC automation systems, we offer a variety of

training courses. If you are interested in these courses, please contact your

Regional Training Center or the Central Training Center in D-90327 Nürnberg,

Germany, Tel. ++49/911/895 3154.

The Latest Information

You can always obtain the very latest information about SIMATIC products from

the following sources:

SOn the Internet: http://www.aut.siemens.de/

SBy calling fax polling no. 08765-93 00 5000

Our SIMATIC Customer Support also supports you with up-to-date information and

downloads, that you may find helpful when using SIMATIC products:

SOn the Internet: http://www.aut.siemens.de/simatic–cs

SIn the SIMATIC Customer Support Mailbox: number

+49 (911) 895-7100

If you connect to the mailbox, use a modem with up to V.34

(28.8 Kbauds), with the following parameter settings:

8, N, 1, ANSI, or dial on ISDN (x.75, 64 Kbps).

SIMATIC Customer Support is available at the following phone and fax numbers or

e–mail addresses. You can also send enquiries by mail on the Internet or by mail to

the mailbox number above.

CD-ROM

Preface

vi IM178-4

C79000-G7076-C178-01

Johnson City

Nuremberg

Singapore

Simatic Basic Hotline

Nuremberg

SIMATIC BASIC Hotline Johnson City

SIMATIC BASIC Hotline Singapore

SIMATIC BASIC Hotline

Localtime: Mo.-Fr. 8:00

to18:00

Phone: +49(911)895-7000

Fax: +49(911)895-7002

E-mail: simatic.support@

nbgm.siemens.de

Localtime: Mo.-Fr. 8:00

to17:00

Phone: +1423461-2522

Fax: +1423461-2231

E-mail: simatic.hotline@

sea.siemens.com

Localtime: Mo.-Fr. 8:30

to17:30

Phone: +65740-7000

Fax: +65740-7001

E-mail: simatic@

singnet.com.sg

SIMATIC Premium Hotline

(charged, only with

SIMATIC Card)

Time: Mo.-Fr. 0:00 to 24:00

Phone: +49(911)895-7777

Fax: +49(911)895-7001

vii

IM178-4

C79000-G7076-C178-01

Contents

1 Product Overview 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 What Can the IM 178-4 Do? 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Fields of Application of the IM 178-4 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 The Hardware of the IM 178-4 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Installing and Removing the Module 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 Wiring 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 Pinout of the Front Connector 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 Description of the Individual Pins (Notes, Explanations) 3-4. . . . . . . . . . . . . . .

3.3 Wiring the Front Connector 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.4 Wiring and Connecting the Bus Connector 3-8. . . . . . . . . . . . . . . . . . . . . . . . . .

4 Parameter Assignment 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1 Methods of Assigning Parameters to the IM 178-4 4-1. . . . . . . . . . . . . . . . . . .

4.2 GSx File 4-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 Preparing for Startup 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.1 Setting the PROFIBUS Address of the IM 178-4 5-1. . . . . . . . . . . . . . . . . . . . .

5.2 Checklist of the Mechanical Construction 5-3. . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3 Checklist for Configuration/Parameter Assignment 5-3. . . . . . . . . . . . . . . . . . .

6 Functions of the IM 178-4 6-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1 Description of the Functions 6-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1.1 Cyclic Processing 6-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1.2 Error Monitoring 6-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2 User Data Interface 6-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 Diagnostics 7-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.1 Status and Diagnostic LEDs 7-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.2 Diagnostic Data of the IM 178-4 7-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.2.1 Structure of Slave Diagnostics 7-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.2.2 Structure of the First 6 Bytes of the Slave Diagnostic Data 7-4. . . . . . . . . . . .

7.2.3 Structure of the ID-Related and Device-Related Slave Diagnostic Data 7-6.

Contents

viii IM178-4

C79000-G7076-C178-01

A Technical Specifications A-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.1 Technical Data of the IM 178-4 A-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B Configuration and Parameter Assignment Frame for the IM 178-4 B-1. . . . . . . . . .

B.1 Structure of the Configuration Frame B-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B.2 Structure of the Parameter Assignment Frame B-2. . . . . . . . . . . . . . . . . . . . . .

B.2.1 Standard Section of the Parameter Assignment Frame B-2. . . . . . . . . . . . . . .

B.2.2 Parameters for the DP Attachment B-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B.2.3 Technological Parameters B-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Glossary Glossary-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Index Index-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1

IM178-4

C79000-G7076-C178-01

Product Overview

Order Number

The product has the order number: 6ES7 178-4BH00-0AE0

Components of the product

1 Module

1 CD ROM with the following content:

Sthe readme.wri, liesmich.wri, lisezmoi.wri, leggimi.wri and leame.wri files

Sthe Englisch, German, French and Italian manual for the IM 178-4

(IM178_E.PDF, IM178_D.PDF, IM178-4_F.PDF, IM178-4_I.PDF)

SDevice database:

– German: SIEM8064.GSG

– English: SIEM8064.GSE

– French: SIEM8064.GSF

– Italian: SIEM8064.GSI

Sthe bitmap files IM178__N.BMP and IM178__S.BMP

SAcrobat Reader

Product Overview

1-2 IM178-4

C79000-G7076-C178-01

1.1 What Can the IM 178-4 Do?

What Can the IM 178-4 Do?

The IM 178-4 is a DP slave with a fixed number of I/Os and has the same design

as S7-300 modules. It has two technologically identical but independent channels

for position detection of incremental position encoders and/or SSI position

encoders and for controlling analog drives ("10 V). The module is attached to the

DP network via a 9 pin sub-D male connector.

Per channel, the module has the following:

SOne input for position detection with SSI position encoders or incremental

encoders with 5 V differential signals

SOne analog output "10 V

S3 digital inputs (2 with fixed functions)

S3 digital outputs that you can use as required.

1.2 Fields of Application of the IM 178-4

Where can you use the IM 178-4?

The IM 178-4 is required mainly by users who want to create distributed position

detection and positioning systems in conjunction with conventional drives with an

analog interface ("10 V) and conventional displacement measuring systems (SSI,

incremental position encoders with 5V differential signals). The technological

functionality is no longer in the individual positioning modules as previously but in a

powerful centralized controller.

Inhaltsverzeichnis

Andere Siemens Steuereinheit Handbücher

Siemens

Siemens SIRIUS 3SB3 Bedienungsanleitung

Siemens

Siemens TC45 Bedienungsanleitung

Siemens

Siemens Simatic S7-1500/ET 200MP Bedienungsanleitung

Siemens

Siemens OLM/P11 V4.0 Bedienungsanleitung

Siemens

Siemens SIRIUS 3RT Bedienungsanleitung

Siemens

Siemens SZE-4X Bedienungsanleitung

Siemens

Siemens NIM-1M Bedienungsanleitung

Siemens

Siemens 3KC ATC3100 Bedienungsanleitung

Siemens

Siemens SIMATIC 6DL1 136-6AA00-0PH1 Bedienungsanleitung

Siemens

Siemens SIMATIC NET CP 1628 Bedienungsanleitung

Siemens

Siemens MXG461B Series Betriebsanleitung

Siemens

Siemens simatic ET 200MP Bedienungsanleitung

Siemens

Siemens Synco RMZ792 Bedienerhandbuch

Siemens

Siemens ASIsafe 3RK1205-0B.00 Bedienungsanleitung

Siemens

Siemens SINUMERIK 808D Bedienungsanleitung

Siemens

Siemens SIMATIC PRO Extension Units KP Series Bedienungsanleitung

Siemens

Siemens SIMADYN D MS51 Bedienungsanleitung

Siemens

Siemens CP 5611 Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens AS-Interface 3RK2402-2 00 Series Bedienungsanleitung

Siemens

Siemens SIMATIC FM 453 Bedienungsanleitung

Siemens

Siemens Climatix POL822 Bedienungsanleitung

Siemens

Siemens MPS-6 Bedienungsanleitung

Siemens

Siemens LOGO! CIM Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung