Siemens XCI2001-U1 Leitfaden
XCI2001-U1
Releasing module
Mounting
Installation
A6V10315050_e_en_--
Building Technologies
2016-10-27 Siemens Industry, Inc.
Legal notice
2 | 14
Building Technologies
A6V10315050_e_en_
--
Siemens Industry, Inc.
2016
-
10
-
27
Legal notice
Technical specifications and availability subject to change without notice.
Transmittal, reproduction, dissemination and/or editing of this document as well as
utilization of its contents and communication thereof to others without express
authorization are prohibited. Offenders will be held liable for payment of damages. All
rights created by patent grant or registration of a utility model or design patent are
reserved.
Issued by:
Siemens Industry, Inc.
Building Technologies Division
8 Fernwood Road
Florham Park, NJ 07932
Tel. +1 973-593-2600
www.sbt.siemens.com/FIS
Edition: 2016-10-27
Document ID: A6V10315050_e_en_--
© Siemens Industry, Inc., 2015
3 |
14
Building
Technologies
A6V10315050_e_en_
--
Siemens Industry, Inc.
2016
-
10
-
27
Table of contents
1Description............................................................................................... 5
2Mounting.................................................................................................. 6
3Views....................................................................................................... 7
4Pin assignments for releasing module.......................................................... 8
4.1 X5 plug connection for releasing relay output.................................................... 8
5Indicators ................................................................................................10
6Adjusting elements for releasing module .....................................................11
7Technical data..........................................................................................12
8FCC Statement........................................................................................13
Building Technologies
A6V10315050_e_e
n_
--
Siemens Industry, Inc.
2016
-
10
-
27
4 | 14
Description
1
5 |
14
Building Technologies
A6V10315050_e_en_
--
Siemens Industry, Inc.
2016
-
10
-
27
1Description
The releasing module XCI2001 supports activation of releasing valves in releasing and
sprinkler systems. Activation can be event-controlled or performed manually. The
releasing module is mounted on the periphery board.
Properties
●Automatic or manual activation
●Dual-channel control
●Supervision of releasing circuit (wiring as class A or class B circuit)
●Supports several valve systems
●Suited to indoor applications (not wet rooms)
Mounting
2
6 | 14
Building Technologies
A6V10315050_e_en_
--
Siemens Industry, Inc.
2016
-
10
-
27
2Mounting
The releasing module XCI2001 is installed on the periphery board as shown and
screwed onto the back box. Slot X901 is also used for the NAC module (1A/2B).
Figure 1: Installing the releasing module on the periphery board
1Periphery board (250p) or periphery board (500p)
2 Threaded standoffs on back box
3 Releasing module XCI2001
4 2x fixing screw
X901 Slot in periphery board
X5 Connection terminal on releasing module
1. Plug the releasing module (3) into slot X901 on the periphery board.
2. Fasten the releasing module to the threaded standoffs (2) in the back box using the
two fixing screws (4).
3. Wire up the releasing module according to the pin assignment.
Views
3
7 |
14
Building Technologies
A6V10315050_e_en_
--
Siemens Industry, Inc.
2016
-
10
-
27
3Views
Figure 2: Printed circuit board view for XCI2001
Element Des. Function
Connector X1 Plug for periphery board connection
X2 Service plug for programmed connection (not used)
X4 Diagnostic service plug (not used)
X5 Releasing relay outputs
Adjustment elements S1* Switch: Arm/Disarm releasing output 1
S2* Switch: Arm/Disarm releasing output 2
S3 Reset key
X3 Jumper for degraded mode enable
LEDs H1 Display: Releasing output 1 status ON/OFF
H2 Display: Releasing output 2 status ON/OFF
H3 Flashing: Releasing module is active
* For Class A wiring, both S1 and S2 must be in the same position at all times when
used to disarm or arm the circuit.
K2
K1
1
1
31
1
1
X3
X4
S1
X5
X1
H1
H2
H3
S3
X2
S2
Pin assignments for releasing module
X5 plug connection for releasing relay output
4
8 | 14
Building Technologies
A6V10315050_e_en_
--
Siemens Industry, Inc.
2016
-
10
-
27
4Pin assignments for releasing module
4.1 X5 plug connection for releasing relay output
Pin Designation Description
4REL_CIR1 (+) Relay output for releasing 1
3REL_CIR1 (-) Relay output for releasing 1
2REL_CIR2 (+) Relay output for releasing 2
1REL_CIR2 (-) Relay output for releasing 2
Admissible cable cross-section: 12…18 AWG, unshielded
XCI2001-U1 supports two Class B circuits or one Class A circuit as shown below:
Class B wiring
Figure 3: Class B wiring
X5
4
3
2
1
+
+
-
-
REL_CIR1
REL_CIR1
REL_CIR2
REL_CIR2
x
x
SOLENOID
x
x
SOLENOID
*
REL-EOL
*
REL-EOL
Pin assignments for releasing module
X5 plug connection for releasing
relay output
4
9 |
14
Building Technologies
A6V10315050_e_en_
--
Siemens Industry, Inc.
2016
-
10
-
27
Class A wiring
Figure 4: Class A wiring
Note 1 Loop wires must be terminated directly onto the SOLENOID
Note 2 Loop wires must be terminated directly onto the SOLENOID
*REL-EOL: Terminating resistor 24 kΩand diode (Siemens part number 500-696359)
The maximum length of line of the relay connections is limited to a resistance of 3.5 Ω.
X5
4
3
2
1
+
+
-
-
REL_CIR1
REL_CIR1
REL_CIR2
REL_CIR2
*
REL-EOL
SOLENOID
.
x
.
x
Note 1
Note 2
Indicators
5
10 | 14
Building Technologies
A6V10315050_e_en_
--
Siemens Industry, Inc.
2016
-
10
-
27
5Indicators
LED indicators
LED Color Function Condition Meaning
H1 Green Status of releasing circuit 1 Off Releasing circuit 1 inactive
On Releasing circuit 1 activated
H2* Green Status of releasing circuit 2 Off Releasing circuit 2 inactive
On Releasing circuit 2 activated
H3 Green Status of processor Off (steady) Processor is not running
Flashing Processor is running
On (steady) Processor is not running
* Not applicable for Class A wiring.
Inhaltsverzeichnis
Andere Siemens Steuereinheit Handbücher
Siemens
Siemens SIMATIC ET 200S Bedienungsanleitung
Siemens
Siemens Sinamics G120 CU240E Bedienungsanleitung
Siemens
Siemens Siprotec DNP3 IP Gebrauchs- und Pflegehandbuch
Siemens
Siemens SIMADYN D SS52 Bedienungsanleitung
Siemens
Siemens SIPLUS CMS2000 VIB-MUX Administratorhandbuch
Siemens
Siemens Synco RMZ792 Bedienerhandbuch
Siemens
Siemens WF 725 Technisches Handbuch
Siemens
Siemens XC1001-A Handbuch
Siemens
Siemens SINUMERIK 828D Turning Betriebsanleitung
Siemens
Siemens XC1003-A Bedienungsanleitung
Siemens
Siemens AS-Interface ASIsafe 3RK1205-0B.00-2AA2 Bedienungsanleitung
Siemens
Siemens Sinumerik 840DiE sl Bedienungsanleitung
Siemens
Siemens OZW771 Bedienungsanleitung
Siemens
Siemens SINUMERIK Series Stücklistenhandbuch
Siemens
Siemens LFL Series Betriebsanleitung
Siemens
Siemens SIRIUS 3RA2916-1A Bedienungsanleitung
Siemens
Siemens XC10 Series Leitfaden
Siemens
Siemens HOTEL SOLUTION HTC3.1/A Bedienungsanleitung
Siemens
Siemens SZE-4X Bedienungsanleitung
Siemens
Siemens SINAMICS G120P CU230P-2 Administratorhandbuch
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
