Siemens MOD-16 Bedienungsanleitung

P/N 315-090830-8

Installation Instructions

Model MOD-16

Output Driver

INTRODUCTION

The Model MOD-16 MXL Output Driver from

Siemens Industry, Inc. is an annunciator driver

that activates up to 16 outputs.

The Model MOD-16 is controlled by the MOI-7

module (See P/N 315-092799). Up to eight

MOD-16s can be used with an MOI-7.

OPERATION

Each MOD-16 activates any of its 16 program-

mable outputs for LEDs or for 24V lamps. The

selection of either the desired LEDs or the 24V

lamps is made at 16 positions on dipswitches S1

and S2 (See Figure 1).

If LEDs are used, open all dipswitches in S1

and S2 to provide for current limiting. Opening

a dipswitch (OFF position) inserts a 2.7K ohm

resistor in series with the output.

If 24V lamps or the SR-35 are used, close all the

dipswitches. Closing a dipswitch (ON position)

eliminates the 2.7K ohm limiting resistor.

CAUTION: PROPER SETTING OF THE DIP-

SWITCH IS NECESSARY TO

PREVENT CIRCUIT DAMAGE.

For additional information on the MXL/MXLV

System, refer to the MXL/MXLV Manual,

P/N 315-092036.

INSTALLATION

Remove all system power before installation,

first battery and then AC. (To power up, first

connect the AC and then the battery.)

1. Mount the MOD-16 in one module space on a

System 3 type rail using the four screws

provided.

2. Connect the MOD-16 to the MOI-7 with the

10-position ribbon cable P/N 555-190940

provided with the MOI-7.

3. If a connection to a MOD-16 module on

another rail is required, use the optional

cable P/N 555-190941.

ELECTRICAL RATINGS

Terminal voltage: 40V peak maximum

Maximum current for each output: 50mA

Siemens Industry, Inc.

Building Technologies Division

Florham Park, NJ

Siemens Building Technologies, Ltd.

Fire Safety & Security Products

2 Kenview Boulevard

Brampton, Ontario

L6T 5E4 Canada

tnerruCeludoMCDV5evitcAAm2

tnerruCeludoMCDV42evitcA Am05+Am0 detcennocrep tuptuo

tnerruCeludoMCDV42ybdnatSAm

NOTES:

1. 18 AWG minimum for LED and 24V

lamp connections.

2. 14 AWG minimum for supply connec-

tions (TB1-9 and 10, TB2-9 and 10).

3. All wiring must be in accordance with

NEC 760.

4. All wiring must conform to local codes

and to the authority having jurisdiction

over the installation.

5. All wiring to MOD-16 is unsupervised

and must not leave enclosure.

6. For additional information see MOI-7

Module instructions, P/N 315-092799.

7. A maximum of 8 MOD-16s can be

used with the MOI-7.

8. When using SR-35, refer to Table 1.

9. Both TB1-9 (or 10) and TB2-9 (or 10)

must be connected to the common of

the power supply.

P/N 315-090830-8

Figure 1

Wiring Connection

TABLE 1

Connection to SR-35 Module*

Note: When using SR-35 with MOD-16, jumpers

P1-P8 on SR-35 must be in position B.

MOD-16 SR-35 Screw Termina

TB1-1 4

TB1-2 8

TB1-8 32

To PSR-1, TB3-1, or to

PS-35, TB1-5 33

To PSR-1, TB3-2, or to

PS-35, TB1-6 35

*For additional information see:

SR-35 Instructions (P/N 315-087691)

PS-35 Instructions (P/N 315-085062)

PSR-1 Instructions (P/N 315-090911)

Andere Siemens Steuereinheit Handbücher

Siemens

Siemens A80485-1 Bedienungsanleitung

Siemens

Siemens MPS-6 Bedienungsanleitung

Siemens

Siemens SIPROTEC4 7SJ61 Bedienungsanleitung

Siemens

Siemens SIMATIC CPU 1515SP PC2 F Bedienungsanleitung

Siemens

Siemens SIMOTICS CONNECT 600 Bedienungsanleitung

Siemens

Siemens OZW771 Bedienungsanleitung

Siemens

Siemens MICROMASTER 420 Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D sl Kurzanleitung

Siemens

Siemens SIRIUS Bedienungsanleitung

Siemens

Siemens LGB21.130A17 Bedienungsanleitung

Siemens

Siemens CU240S DP-F Bedienungsanleitung

Siemens

Siemens SIMATIC Technisches Dokument

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC NET CP 1243-1 DNP3 Merkblatt

Siemens

Siemens 7153 Bedienungsanleitung

Siemens

Siemens SIMOTION D4 5 Series Bedienungsanleitung

Siemens

Siemens LAL Series Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D sl Stücklistenhandbuch

Siemens

Siemens ZIC-4A Service-Handbuch

Siemens

Siemens 2AO U HF Bedienungsanleitung

Siemens

Siemens SINAMICS V60 Bedienungsanleitung

Siemens

Siemens IONPURE VNX50HH-2 Handbuch

Siemens

Siemens SIMATIC ET 200S IM151-1 FO STANDARD Bedienungsanleitung

Siemens

Siemens FDCI723 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung