Siemens Hicom 300 optiset E Standard Bedienungsanleitung

Contents

Hicom 300 Operators Manual......................................................................1

Description of Keyboard controls.................................................................2

Console - Idle condition ...............................................................................5

Answering an incoming call .........................................................................6

Extend call to free extension .......................................................................7

Extend Call to busy extension .....................................................................8

Recall - No answer from free extension.....................................................10

Recall from busy extension .......................................................................11

Extend call to extension inVoice Mail........................................................12

Console calls extension.............................................................................13

Extension calls Console ............................................................................13

Make an outgoing call from Console .........................................................14

Extending outgoing call to extension .........................................................15

Make outgoing call while extension is holding ...........................................16

Extending outgoing call to extension usingTrunk Call Charge key............17

Placing an incoming call in Series .............................................................18

Recall of Series call...................................................................................18

Automatic redial of outside number ...........................................................19

Park a call..................................................................................................20

Retrieve a parked call from the Console....................................................20

Override a call on a busy extension...........................................................21

Extension transfers call to Console ...........................................................22

Repertory Dialler / Name keys ..................................................................23

Place Console in unstaffed mode..............................................................24

Take Console out of unstaffed mode .........................................................24

Place Console in night service ..................................................................25

Take Console off night service ..................................................................25

Night Service options ................................................................................26

Hicom 300 Operators Manual

Description of Keyboard controls

Tape Recorder - used to record conversations if tape recorder is

connected to the system.

Trunk No. ID - used to identify faulty trunk line number.

Serial Call - call can be placed in series by depressing series key.

CallsplacedinserieswillrecalltotheConsoleforre-extendingtothe

next extension.

Call Park - for parking a call in one of the 10 park locations per

console. The location number is displayed on the screen for the

operator.

Cut Off - will disconnect a call set up by the operator.

Name Name Name Name Name

123

456

789

∗

Alarm Interrogate - normally disabled. Alarms registered at the

service terminal.

Call charge information - If call charge requested, will give details

once call is completed.

Night service or Unstaffed mode - All calls arriving after this key

is depressed go to alternate consoles, the night answer stations or

night bells.

Trunk line reservation - This key reserves specific outgoing lines

for the use by the operator, e.g. during peak traffic.

Class of Service Changeover - This LED will be on if one or more

extensions in the system are locked.

Trunk Call Charge - Will be depressed prior to extending call if call

charges are required for immediate billing needs.

Trunk Group 1 } These two keys can be programmed as dial

} keys. Normally used for Tie Lines.

Trunk Group 2 }

Internal or External Route - To indicate voice channel in use.

Personal Call - Used to answer and set up personal calls. Each

consolehasitsownpersonalextensionnumber.Canbeused when

console is in unstaffed mode.

Operator Key - Used to answer all operator (internal) calls.

Trunk Call Key - Used to answer all Incoming (external) calls.

Paging Facility - Not used on current software.

Conference - Not used on current software.

MemoryAccess-Usedtoaccessandprogrammevariousfeatures

e.g.repertorydialkeys andtoselectper-programmed nightservice.

Also select language of choice.

Memory Input - Used to store above programming and selections.

Override -Forbreakinginto calls whendialledextensionsare busy.

Override tone warns the extension of break-in.

Saved Number - For storing and later redialling of a selected

number. The number can be stored for a long as required.

Trunk Queuing - Used to book an outgoing line if all lines are busy.

AttendantRelease-Forthethroughconnectionofanincomingcall

and an extension who are connected to the console but not con-

nected to each other.

Delete - Used to delete an incorrectly dialled extension number or

outgoing number.

Hold while Extending - Used if you wish to announce an incoming

call to an extension.

Volume/Display - Volume control for ringing or depress

bothkeystoinvertdisplay(blackonwhiteorwhiteonblack).

Light Emitting Diodes (LED,s) above keys

LED Off No calls waiting (key free/available)

LED Fast flash Call waiting (depress key to answer)

LED Slow flash Call held until key is depressed again

LED Constant Call answered or feature activated

Console - Idle condition

TUE 23.08. 11:22

This display is always available on the Console and provides the following

information.

1. Number of incoming calls queuing for answer

2. Number of operator calls queuing for answer

3. Date.

4. Time.

Examples

T 3 (3 incoming calls queuing for answer)

O 1 (1 operator call queuing for answer)

The type of call to be answered can be selected by the operator (see relevant

instructions).

Answering an incoming call

What you have to do What happens

Display shows

T 0 INCOMING

Depress Display shows

INCOMING

CONNECTED

You are now connected to caller.

Extend call to free extension

What you have to do What happens

Depress Display shows

ON HOLD

Key in required extension number Display shows

2250

SCROOBY J

FREE

To announce the call wait until extension

answers and then

Depress

If you do not wish to announce the call

Depress Call extended and ringing at

extension

Display reverts to idle condition

Caller will hear ringing tone when

call is extended.

If call is not answered in 25

seconds it will recall to Console.

Attendant Speed Release

If this option has been enabled

Key in required extension number Display reverts to idle condition

Extend Call to busy extension

What you have to do What happens

Extend call using Keypad Display shows

2250

SCROOBY J

BUSY INTERNAL or

BUSY EXTERNAL

Depress Display shows

CONNECTED

You are now reconnected to caller

Advise caller that extension is busy.

Caller has 3 options:

1. To hold for busy extension.

2. Ask for another extension.

3. Call again later or leave a message.

Option 1 - Hold for extension

What you have to do What happens

Depress Display shows

IDLE CONDITION

Caller is now camped-on to busy

extension.

If extension has not taken call in ±25

seconds it will recall to Console.

Option 2 - Try another extension

Depress

Procedure now as for normal extending

to free or busy extension.

Option 3 - Caller will call again later

Take message if required - then

Depress Display shows

IDLE CONDITION

Recall - No answer from free extension

What you have to do What happens

Display shows

T 0 RECALL

Depress Display shows

2250

SCROOBY J

NO ANSWER

You are now connected to caller and can

advise of no-answer from extension.

The caller now has three options:

1. Caller will continue to hold - RE-EXTEND

2. Caller requires another extension - RE-EXTEND

3. Caller will call again -

Andere Handbücher für Hicom 300 optiset E Standard

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens S7-1200 TELECONTROL Bedienungsanleitung

Siemens

Siemens SIRIUS S2 Bedienungsanleitung

Siemens

Siemens SINUMERIK 810D Merkblatt

Siemens

Siemens Albatros2 RVA78.690 Bedienungsanleitung

Siemens

Siemens N526E02 Bedienungsanleitung

Siemens

Siemens GNA 1E Series Bedienungsanleitung

Siemens

Siemens LMO39 Series Bedienerhandbuch

Siemens

Siemens SINUMERIK 840D sl Bedienungsanleitung

Siemens

Siemens MT Series Betriebsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens MT Series Betriebsanleitung

Siemens

Siemens 81000 series Bedienungsanleitung

Siemens

Siemens SIPROTEC 5 Bedienungsanleitung

Siemens

Siemens Flowrite 599 Series Betriebsanleitung

Siemens

Siemens 3TW7291-1A Leitfaden

Siemens

Siemens SIMATIC S5 CPU Direct Driver Bedienungsanleitung

Siemens

Siemens SIMOTION P320-4 E Bedienungsanleitung

Siemens

Siemens ECOFAST 3RK1303 S AA Series Bedienungsanleitung

Siemens

Siemens SIMATIC S5-90U Benutzerhandbuch

Siemens

Siemens 81000 series Bedienungsanleitung

Siemens

Siemens SSA911.01TH Bedienungsanleitung

Siemens

Siemens GEB 4 Series Bedienungsanleitung

Siemens

Siemens 3RE4 Bedienungsanleitung

Siemens

Siemens SIMATIC S7-200 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung