Siemens LOGO! Bedienungsanleitung

updated 24/03/2020

•PRE-PROGAMMED as 4 CHANNEL 7 DAY TIME SW. with HOLIDAY OFF OVERRIDE

•12 PROGRAMMABLE HOLIDAY BLOCK DATES (individual days or group of days)

•INDIVIDULE AFTER HOURS PUSH BUTTON INPUTS (AHR up to 99hrs run time)

•HOLIDAYS CAN BE SET FOR ONCE OFF OR REPEAT EACH YEAR (ie CHISTMAS)

•COMMON HOLIDAY OFF OVERRIDE FUNCTION INTERLOCKABLE WITH EACH OF

THE FOUR TIME SWITCHES.

•INDIVIDULE TIME SWITCHES CAN BE SET FOR MULTIPLE ON/OFF's EACH DAY

•PLAIN ENGLISH SCROLLING LCD DISPLAY SHOWING OUTPUT & HOLIDAY STATUS

•EXISTING HOLIDAY PROGRAM DATE INFORMATION AVAILABLE ON LCD SCREEN

•TOGGLE ON / TOGGLE OFF AHR FUNCTION.

•DIN RAIL MOUNT, SUITS M.C.B ENCLOSURES

•OUTPUT RELAYS ARE POTENTIAL FREE & RATED AT 240v 10A (res.)

•MANUAL ALL ON & OFF KEYBOARD FACILITY (WILL AUTO RETURN TO AUTO AFTER 99HRS)

This pre-programmed Siemens Logo PLC has been programmed for use as a 4

channel 7 day Time Switch with independent output voltage free relays (240v

rated). Each time switch channel has its own multi on/off per day, 7 days a week

time switch setting schedule plus individual after hours push button inputs. 12

Holiday Start / Finish blocks ( single day or block of days ..ie easter ) can be

programmed as a common off HOLIDAY override to override any or all of the four

time switches but are still able to individually triggered on by the their

independent AHR inputs. The 4 time switches are each preset to operate Monday

to Friday from 08:00 (8 am) till 17:30 (5:30pm), & the after hour timers preset for

2 hours operation, but all settings are user adjustable via the keypad onsite. Two

of the PLC keyboard buttons have been assigned as Master Manual all ON &

OFF buttons, but if left in Manual returns to Auto time switch control after 99

hours if not toggled back to Auto control by again pressing the PLC fascia button.

LOGO as 4 channel 365 T/Switch

PRE PROGRAMMED SIEMENS LOGO PLC as

4 x 7 DAY TIME SWITCH

c/w INDIVIDULE AHR I/P's

+ common 365 DAY HOLIDAY OFF override

HEVAC CONTROL AGENCIES Pty.Ltd. www.hevac.com.au 03 95627888

24v AC or DC POWERED

240V VERSION AVAILABLE

VOLTAGE FRE RELAY OUTPUTS

updated 24/03/2020

LOGO as 4 channel 365 T/Switch

HEVAC CONTROL AGENCIES Pty.Ltd. www.hevac.com.au 03 95627888

OPTIONAL

AHR PUSH

BUTTONS

TIME SW. 1

TIME SW. 2

TIME SW. 3

TIME SW. 4

HOL.INTERLOCK TS1

HOL.INTERLOCK TS2

HOL.INTERLOCK TS3

HOL.INTERLOCK TS4

THE FOUR INTERNAL 7 DAY TIME SWITCHES CAN BE INDIVIDULLY INTERLOCKED TO NOT

RESPOND TO THE COMMON HOLDAY OFF OVERRIDE SCHEDULE. FITTING A LINK FROM

"P1" TO i5, i6, i7 or i8 DISABLES THAT RELATIVE TIME SWITCH INTERLOCK TO THE

COMMON HOLIDAY PROGRAM, ie: IF TIME SWITCH 4 IS USED FOR EXAMPLE TO ENABLE

SECURITY LIGHTING AND IS TO ONLY OPERATE AS PER ITS 7 DAY TIME SWITCH

PROGRAM AND NOT TO BE OVERRIDEN OFF BY THE HOLIDAY PROGRAM, A LINK SHOULD

BE FITTED BETWEEN TERMINALS P1 & i8.

THE FOUR INDEPENDANT TIME SWITCH AFTER HOUR PUSH BUTTON INPUTS CAN BE

LOOPED TO OPERATE FROM A COMMON SINGLE PUSH BUTTON OR ANY COMBINATION

THAT IS REQUIRED.

OPERATIONAL NOTES :

PLC CONTROL PANEL

FROM THE CURRENT DISPLAYED RUNNING SCREEN PRESS THE

DOWN ARROW BUTTON UNTIL THE LAST SCREEN APPEARS

SHOWING JUST THE TIME & DATE AS SHOWN IN THE NEXT

SCREEN SHOT BELOW.

NOW PRESS THE ESC BUTTON TO CAUSE THE 1ST INTERNAL MENU

SCREEN TO APPEAR.

USE THE DOWN BUTTON TO HIGHLIGHT "PROGRAM" , THEN PRESS

OK, THE SCREEN BELOW WILL APPEAR.

PRESS OK ON THE ALREADY HIGHLIGHTED "SET PARAMETER" AND

A THE LIST OF USED INTERNAL PROGRAM BLOCKS IS DISPLAYED

STARTING AT "B001" (OR NAMES IF BLOCKS HAVE BEEN TAGGED ie "EASTER").

SCROLL DOWN THE PARAMETER LIST USING THE DOWN BUTTON

TO THE LOGIC BLOCK THAT NEEDS EDITING . SEE ATTACHED LIST

OF LOGIC BLOCKS WITH PARTICULAR SETTINGS THAT MAY NEED

ADUSTING TO SUIT SITE CONDITIONS ETC.

USE THE UP OR DOWN BUTTONS TO HIGHLIGHT THE PARTICULAR

PARAMETER REQUIRING EDITING. PRESS THE OK BUTTON, THEN

EDIT THE VALUE USING THE UP, DOWN, LEFT & RIGHT BUTTONS

AS REQUIRED TO SET THE NEW VALUE, PRESS OK TO LOCK IN NEW

VALUE, THEN PRESS ESC TO EXIT EDITING & / OR TO MOVE TO

ANOTHER PARAMETER TO EDIT & REPEAT.

TO RETURN TO THE NORMAL RUNNING SCREEN, PRESS ESC UNTIL

ONLY THE TIME & DATE SCREEN IS DISPLAYED, THEN PRESS THE

UP BUTTON UNTIL THE DISPLAYED SCREEN NO LONGER CHANGES,

THIS RETURNS THE LOGO TO ITS NORMAL DISPLAY & OPERATION.

HOW TO EDIT SETTINGS IN THE SIEMENS LOGO

THIS PRODUCT BEING A PRE PROGRAMMED PLC ,

ACCESS TO EDITABLE SETTINGS IS VIA ACCESSING

DATA IN INTERNAL PROGRAM MEMORY LOCATIONS.

TO EDIT VALUES -FOLLOW THE PROCEDURE BELOW.

"PROGRAM"

"SET PARAMETER"

4 CHANNEL TIME SWITCH EDITABLE PARAMATER LIST

B001

B002

B003

B004

B005

B006

(B007)

(B008)

(B009)

(B010)

(B011)

(B012)

(B013)

(B014)

(B015)

(B016)

(B017)

B018

LOGIC BLOCK USE

LCD SCREENS SHOWING BLOCK # OR TAG

HOLIDAY 1

HOLIDAY 2

HOLIDAY 3

HOLIDAY 4

HOLIDAY 5

HOLIDAY 6

HOLIDAY 7

HOLIDAY 8

HOLIDAY 9

HOLIDAY 10

HOLIDAY 11

HOLIDAY 12

7 DAY TIME SW.

AHR 1 TIMER

AHR 2 TIMER

AHR 3 TIMER

AHR 4 TIMER

N/A

OTHER N/A LOGIC BLOCKS NOT SHOWN

NOTE : IF A HOLIDAY MEMORY BLOCK LOCATION (B001 - B012) IS NOT

USED, LEAVE BOTH ON & OFF DATES SET TO 2000-01-01

EXAMPLE LCD SCREENS FOR EDITING HOLIDAYS

START DATE OF HOLDAY

BLOCK TAG (LABEL) & page #

YEARLY ON = REPEATS EACH YEAR YEARLY

OFF = DOES NOT REPEAT YEARLY

MONTHLY ON = REPEATS EACH MONTH

MONTHLY OFF = DOES NOT REPEAT MONTHLY

(YEAR / MONTH / DAY of MONTH )

NOTE : IF SINGLE DAY HOLIDAY SET ON DATE AS

HOLIDAY DATE, SET OFF DATE AS NEXT DAY

DATE. IF BLOCK OF DAYS SET ON DATE AS 1ST

HOLIDAY DATE & OFF DATE AS DAY AFTER LAST

HOLIDAY DATE.

END DATE OF HOLIDAY

(SET TO DATE AFTER HOLIDAY)

LOGIC BLOCK B001 TAGGED & DISPLAYED AS "B4 TERM 1" IN THIS EXAMPLE

EXAMPLE LCD SCREENS FOR EDITING 7 DAY TIME SWITCH 1

HIGHLIGHT "D1" TO SET WHICH DAYS OF THE WEEK

ARE TO BE CONTROLLED BY THIS PARTICULAR

INTERNAL TIME SWITCH, USE UP, DOWN, LEFT & RIGHT

BUTTONS TO SELECT DAYS ( "-" = DISABLED DAY ).

SCROLL DOWN TO "On1" USING DOWN BUTTON TO

HIGHLIGHT ON (START) TIME , PRESS OK, THEN USING

UP,DOWN, LEFT & RIGHT BUTTONS SET REQUIRED TIME.

REPEAT FOR "Off1" OFF (FINISH) TIME. 3 ON/OFF'S CAN BE

SET PER DAY IF REQUIRED.

PRESS THE "ESC" BUTTON TO RETURN TO THE PROGRAM

BLOCK LIST TO EDIT ANOTHER BLOCK OR REPEATEDLY

PRESS "ESC" TO EXIT THE EDITING SCREENS & RETURN TO

NORMAL DISPLAY & OPERATION.

EXAMPLE LCD SCREENS FOR EDITING DELAY ON+OFF TIMERS

HIGHLIGHT THE "T" VALUE USING THE UP, DOWN,

LEFT, RIGHT & OK BUTTONS TO SET REQUIRED

VALUE. PRESS THE "ESC" BUTTON TO RETURN TO THE

PROGRAM BLOCK LIST . REPEATEDLY PRESS "ESC" TO

EXIT THE EDITING SCREENS & RETURN TO NORMAL

DISPLAY & OPERATION.

EXAMPLE LCD SCREENS FOR EDITING ON or OFF DELAY TIMERS

EDIT TH FOR THE ON DELAY SETTING &

TL FOR THE OFF DELAY SETTING

HEVAC CONTROL AGENCIES PTY.LTD 0395627888 www.hevac.com.au

Andere Handbücher für LOGO!

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens RVP200/210 Bedienungsanleitung

Siemens

Siemens RVL482 Bedienungsanleitung

Siemens

Siemens 25 Handbuch

Siemens

Siemens LME7 Series Bedienungsanleitung

Siemens

Siemens SIMOVERT MASTERDRIVES SBP Bedienungsanleitung

Siemens

Siemens BT300 LonWorks Bedienungsanleitung

Siemens

Siemens SIPART Series Bedienungsanleitung

Siemens

Siemens SIMATIC FM 452 Bedienungsanleitung

Siemens

Siemens RL 605D23 Bedienungsanleitung

Siemens

Siemens ACR12.3 1 Series Bedienungsanleitung

Siemens

Siemens RWD45U Bedienungsanleitung

Siemens

Siemens GDA Series Bedienungsanleitung

Siemens

Siemens GCA Series Bedienungsanleitung

Siemens

Siemens SIMATIC S5-100U Benutzerhandbuch

Siemens

Siemens Simatic S7-300 Montageanleitung

Siemens

Siemens OpenAir GLB141.1P Betriebsanleitung

Siemens

Siemens SINUMERIK 840D sl Bedienungsanleitung

Siemens

Siemens ACVATIX G B111.9E/KN Series Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens SIPART PS2 Bedienungsanleitung

Siemens

Siemens OpenAir GIB13.1 Series Bedienungsanleitung

Siemens

Siemens Powermite 599 Series Betriebsanleitung

Siemens

Siemens SINUMERIK 840D sl Bedienungsanleitung

Siemens

Siemens RMU7 B Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung