Siemens Simatic S7-1500 Bedienungsanleitung

SIMATIC Drive Controller

SIMATIC

SIMATIC Drive Controller

Equipment Manual

11/2019

A5E46600370

-AA

Preface

SIMATIC Drive Controller

Documentation Guide

Product overview

Connecting

Interrupts, diagnostics

alarms, error messages and

system alarms

Technical specifications

Dimension drawing

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E46600370-AA

Ⓟ

11/2019 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury mayresult if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

SIMATIC Drive Controller

Equipment Manual, 11/2019, A5E46600370-AA 3

Preface

Purpose of the documentation

This equipment manual supplements the system manual of the SIMATIC Drive Controller

family of controllers. It contains a concise description of the SIMATIC Drive Controller

hardware and, in addition to the product overview, includes information on:

●Interfaces

●Wiring diagrams

●Display and operator controls

●Technical specifications

In the SIMATIC Drive Controller system manual, you will find information on configuring,

installing, wiring and commissioning the SIMATIC Drive Controller, among other things.

All cross-system functions, such as motion control and communication functions, are

described in the function manuals.

The information provided in this manual and the system manual enables you to commission

the SIMATIC Drive Controller.

Conventions

STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the

configuration and programming software "STEP 7 (TIA Portal)".

Also take note of information labeled as follows:

Note

A note contains important information on the product described in the

documentation, on the

handling of the product or on the section of the documentation to which particular attention

should be paid.

Preface

SIMATIC Drive Controller

4Equipment Manual, 11/2019, A5E46600370-AA

Special information

Note

Important note for maintaining the operational safety of your system

Systems with safety

-oriented variants are subject to special operational safety requirements

on the part of the operator. The supplier is also obliged to comply with special product

monitoring measures. For this

reason, we inform you in personal notifications about product

developments and features that are (or could be) relevant to the operation of systems from a

safety perspective.

By subscribing to the corresponding notifications, you will ensure that you are

always up-to-

date and able to make changes to your system when necess

ary.

-click on "email on

update":

SIMATIC S7

-1500/SIMATIC S7-1500F

(

https://support.industry.siemens.com/cs/ww/en/ps/13716)

Distributed I/O (

https://support.industry.siemens.com/cs/ww/en/ps/14029)

STEP 7 (TIA Portal) (

https://support.industry.siemens.com/cs/ww/en/ps/14667)

SINAMICS S120 (

https://support.industry.siemens.com/cs/ww/en/ps/13231)

SINAMICS Startdrive (

https://support.industry.siemens.com/cs/ww/en/ps/13438)

Operator control and monitoring systems

(

https://support.industry.siemens.com/cs/ww/en/ps/14729)

Industrial Communication (

https://support.industry.siemens.com/cs/ww/en/ps/15247)

Safety systems

– Safety Integrated

(

https://support.industry.siemens.com/cs/ww/en/ps/19902)

Note

When using F

-CPUs in safety mode and fail-safe modules, observe the description of the F-

system in SIMATIC Safety

- Configuring and Programming

(

https://support.industry.siemens.com/cs/ww/en/view/54110126).

Recycling and disposal

For environmentally friendly recycling and disposal of your old equipment, contact a certified

electronic waste disposal company and dispose of the equipment according to the applicable

regulations in your country.

Preface

SIMATIC Drive Controller

Equipment Manual, 11/2019, A5E46600370-AA 5

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be

connected to an enterprise network or the internet if and to the extent such a connection is

necessary and only when appropriate security measures (e.g. firewalls and/or network

segmentation) are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure

to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/industrialsecurity).

Siemens Industry Online Support

You can find current information on the following topics quickly and easily here:

●Product support

All the information and extensive know-how on your product, technical specifications,

FAQs, certificates, downloads, and manuals.

●Application examples

Tools and examples to solve your automation tasks – as well as function blocks,

performance information and videos.

●Services

Information about Industry Services, Field Services, Technical Support, spare parts and

training offers.

●Forums

For answers and solutions concerning automation technology.

●mySupport

Your personal working area in Industry Online Support for messages, support queries,

and configurable documents.

This information is provided by the Siemens Industry Online Support in the Internet

(https://support.industry.siemens.com).

Preface

SIMATIC Drive Controller

6Equipment Manual, 11/2019, A5E46600370-AA

Industry Mall

The Industry Mall is the catalog and order system of Siemens AG for automation and drive

solutions on the basis of Totally Integrated Automation (TIA) and Totally Integrated Power

(TIP).

You can find catalogs for all automation and drive products on the Internet

(https://mall.industry.siemens.com) and in the Information and Download Center

(https://www.siemens.com/automation/infocenter).

SIMATIC Drive Controller

Equipment Manual, 11/2019, A5E46600370-AA 7

Table of contents

Preface ................................................................................................................................................... 3

1 SIMATIC Drive Controller Documentation Guide ..................................................................................... 9

2 Product overview .................................................................................................................................. 11

2.1 Application range ....................................................................................................................11

2.1.1 SIMATIC Drive Controller .......................................................................................................11

2.2 Components and functionality ................................................................................................16

2.3 Hardware properties ...............................................................................................................20

2.4 Firmware functions of the CPU...............................................................................................24

2.5 Firmware functions of SINAMICS Integrated..........................................................................30

2.6 Operator controls, displays and connection elements............................................................32

2.6.1 View of SIMATIC Drive Controller with front covers ...............................................................32

2.6.2 View of SIMATIC Drive Controller without front covers ..........................................................33

2.6.3 Top view of SIMATIC Drive Controller....................................................................................34

2.6.4 View of the SIMATIC Drive Controller from below..................................................................35

2.6.5 Front covers ............................................................................................................................36

2.6.6 Nameplates.............................................................................................................................38

2.7 Mode selector .........................................................................................................................41

2.8 FUNCT button.........................................................................................................................42

3 Connecting ........................................................................................................................................... 43

3.1 Supply voltage X124 ...............................................................................................................43

3.2 PROFINET X150, X160 and X130 .........................................................................................46

3.3 PROFIBUS X126 ....................................................................................................................49

3.4 Digital inputs and outputs of X122, X132 and X142 ...............................................................50

3.5 DRIVE-CLiQ interfaces X100 to X103....................................................................................56

3.6 Wiring and block diagrams .....................................................................................................57

3.6.1 SIMATIC Drive Controller block diagram................................................................................57

3.6.2 Onboard digital inputs/digital outputs of X122, X132 and X142 .............................................58

3.6.3 DRIVE-CLiQ interfaces X100 to X103 ....................................................................................59

Table of contents

SIMATIC Drive Controller

8Equipment Manual, 11/2019, A5E46600370-AA

4 Interrupts, diagnostics alarms, error messages and system alarms ....................................................... 61

4.1 Status and error displays ....................................................................................................... 61

4.1.1 Overview ................................................................................................................................ 61

4.1.2 Status and error display of the CPU ...................................................................................... 63

4.1.3 Status and error display of SINAMICS Integrated ................................................................. 65

4.1.4 ACT LED and interface LEDs ................................................................................................ 66

4.1.5 7-segment display .................................................................................................................. 68

4.2 Interrupts, diagnostics and system messages....................................................................... 69

4.2.1 Interrupts, diagnostics and system messages....................................................................... 69

5 Technical specifications ........................................................................................................................ 70

A Dimension drawing ............................................................................................................................... 88

SIMATIC Drive Controller

Equipment Manual, 11/2019, A5E46600370-AA 9

SIMATIC Drive Controller Documentation Guide

The documentation for the SIMATIC Drive Controller is divided into three areas. This

arrangement enables you to access the specific content you require.

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the SIMATIC Drive Controller. The STEP 7 online help supports

you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, interfaces, wiring diagrams, display and operator control elements and technical

specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

Drive Controller and SIMATIC S7-1500 automation system, such as diagnostics,

communication, Motion Control, Web server and OPC UA.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742691).

Changes and supplements to the manuals are documented in a Product Information.

You can download the product information free of charge from the Internet

(https://support.industry.siemens.com/cs/us/en/view/68052815).

Andere Handbücher für Simatic S7-1500

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens SKB32 Series Bedienungsanleitung

Siemens

Siemens CU240E-2 Bedienungsanleitung

Siemens

Siemens SIRIUS S00 Bedienungsanleitung

Siemens

Siemens N 545D31 Bedienungsanleitung

Siemens

Siemens UTMC OTU Bedienungsanleitung

Siemens

Siemens SITRANS I100 7NG4124-0AA00 Bedienungsanleitung

Siemens

Siemens SINAMICS S120 Technisches Dokument

Siemens

Siemens SIMOTION P320-4 E Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Technisches Dokument

Siemens

Siemens GAMMA instabus UP 204 Service-Handbuch

Siemens

Siemens Simatic S7-1500 Stücklistenhandbuch

Siemens

Siemens SQL321B Series Bedienungsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens Powermite 599 MT Series Betriebsanleitung

Siemens

Siemens SIMATIC S7-1500T Bedienungsanleitung

Siemens

Siemens OpenAir GEB141.1P Betriebsanleitung

Siemens

Siemens Flowrite 599 Series Betriebsanleitung

Siemens

Siemens 3RE10 Series Bedienungsanleitung

Siemens

Siemens SIPART DR24 Bedienungsanleitung

Siemens

Siemens SINAMICS S120 Benutzerhandbuch

Siemens

Siemens RWF40 Series Bedienungsanleitung

Siemens

Siemens Flowrite 599 Series Betriebsanleitung

Siemens

Siemens SIMATIC S5-95F Bedienungsanleitung

Siemens

Siemens Albatros2 RVA78.690 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung