Siemens SIMATIC ET 200SP HA Bedienungsanleitung

SIMATIC

ET 200SP HA

Digital Input Module DI 8x230VAC

HA (6DL1131-6GF00-0PK0)

Manual

12/2017

A5E39401560-AB

Security information 1

Preface 2

Product overview 3

Wiring 4

Parameters 5

Displays and interrupts 6

Technical specifications 7

Drivers, parameters,

diagnostics messages and

address space A

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will be

used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property

damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified

personnel are those who, based on their training and experience, are capable of identifying risks and avoiding

potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended or

approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software described.

Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in

this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

Siemens AG

Division Process Industries and Drives

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E39401560-AB

Ⓟ 01/2018 Subject to change

Table of contents

1 Security information......................................................................................................................................5

2Preface.........................................................................................................................................................7

3Product overview..........................................................................................................................................9

3.1 Properties of the I/O module DI 8x230VAC HA.......................................................................9

4Wiring.........................................................................................................................................................11

4.1 Pin assignment of the I/O module DI 8x230VAC HA.............................................................11

4.2 Schematic circuit diagram......................................................................................................13

5 Parameters.................................................................................................................................................15

5.1 Parameters of the I/O module DI 8x230VAC HA...................................................................15

5.2 Module/channel parameters...................................................................................................15

5.3 Explanation of the module/channel parameters.....................................................................15

6 Displays and interrupts...............................................................................................................................17

6.1 Status and error displays of the I/O module DI 8x230VAC HA..............................................17

6.2 Interrupts................................................................................................................................18

7 Technical specifications..............................................................................................................................21

A Drivers, parameters, diagnostics messages and address space...............................................................25

A.1 Concept of the driver and diagnostics blocks.........................................................................25

A.2 Parameter assignment...........................................................................................................26

A.3 Parameter assignment and structure of the module/channel parameters.............................27

A.4 Diagnostics messages and maintenance events...................................................................30

A.5 Address space.......................................................................................................................31

Index...........................................................................................................................................................33

Digital Input Module DI 8x230VAC HA (6DL1131-6GF00-0PK0)

Manual, 12/2017, A5E39401560-AB 3

Table of contents

Digital Input Module DI 8x230VAC HA (6DL1131-6GF00-0PK0)

4Manual, 12/2017, A5E39401560-AB

Security information [ID: 91040772235] 1

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines, and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation) are

in place.

For additional information on industrial security measures that may be implemented, please

visit:

https://www.siemens.com/industrialsecurity

Siemens’ products and solutions undergo continuous development to make them more secure.

Siemens strongly recommends that product updates are applied as soon as they are available

and that the latest product versions are used. Use of product versions that are no longer

supported, and failure to apply the latest updates may increase customer’s exposure to cyber

threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under

https://www.siemens.com/industrialsecurity.

Digital Input Module DI 8x230VAC HA (6DL1131-6GF00-0PK0)

Manual, 12/2017, A5E39401560-AB 5

Security information

Digital Input Module DI 8x230VAC HA (6DL1131-6GF00-0PK0)

6Manual, 12/2017, A5E39401560-AB

Preface [ID: 87228164363] 2

Validity of the documentation

This device manual describes the DI 8x230VAC HA I/O module with the article number

6DL1131-6GF00-0PK0.

It complements the system manual of the ET 200SP HA Distributed I/O System.

Functions that generally relate to the system are described in this manual.

The information in this device manual and the system/function manuals enables you to put the

ET 200SP HA into operation.

Appendices

The appendices provide information that is relevant for using the ET 200SP HA outside the

PCS 7 environment.

Conventions

Please also observe notes marked as follows:

Note

A note contains important information on the product described in the documentation, on the

handling of the product and on the section of the documentation to which particular attention

should be paid.

Digital Input Module DI 8x230VAC HA (6DL1131-6GF00-0PK0)

Manual, 12/2017, A5E39401560-AB 7

Preface

Digital Input Module DI 8x230VAC HA (6DL1131-6GF00-0PK0)

8Manual, 12/2017, A5E39401560-AB

Product overview 3

3.1 Properties of the I/O module DI 8x230VAC HA [ID: 80193251851]

View of the module

DIAG MT



DI HA

8x230VAC

7 8

15 16

910

11 12

13 14

C. 6

A.0

C. 2

A.4

D.7

B.1

D. 3

B. 5

C. 6

A.0

C. 2

A.4

D.7

B.1

D. 3

B. 5

1P1 1P2

2P1 2 P 2

MAX.10 A

.0 .1

.2 . 3

.4 .5

.6 .7

3 4

V 1.0 .0

CC 42

6DL1131-6GF00-0PK0

①Module type and designation ⑦Module type color coding

②LED for diagnostics ⑧Product version

③LED for maintenance ⑨Function status and firmware version

④2D matrix code ⑩Color code for selection of the color-coded labels

⑤Wiring diagram ⑪Serial number

⑥LEDs for channel status ⑫Article number

Figure 3-1 View of DI 8x230VAC HA

Properties

The I/O module has the following technical properties:

● 8 electrically isolated digital inputs in four groups (A to D) each to two channels

● Suitable for connection of switches and 2-wire sensors in accordance with IEC 61131, type

Digital Input Module DI 8x230VAC HA (6DL1131-6GF00-0PK0)

Manual, 12/2017, A5E39401560-AB 9

The I/O module supports the following functions:

● Firmware update

● I&M identification data

● Parameter reassignment in RUN

● Value status QI

You can configure the I/O module with HW Config and integrate it into your system.

Accessories

The following accessories must be ordered separately:

● Labeling strips

● Color-coded labels

● Reference identification label

● Shield connector

Product overview

3.1 Properties of the I/O module DI 8x230VAC HA

Digital Input Module DI 8x230VAC HA (6DL1131-6GF00-0PK0)

10 Manual, 12/2017, A5E39401560-AB

Andere Handbücher für SIMATIC ET 200SP HA

Inhaltsverzeichnis

Andere Siemens E/A-System Handbücher

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens 262E01 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens DI 8x24VAC/48VUC BA Bedienungsanleitung

Siemens

Siemens SIM-16 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S M151-3 PN Bedienungsanleitung

Siemens

Siemens Simatic CFU Kurzanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC 6DL1193-6AR00-0AA0 Technisches Dokument

Siemens

Siemens 6ES7521-1BL00-0AA0 Bedienungsanleitung

Siemens

Siemens Simatic ET200pro Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Stücklistenhandbuch

Siemens

Siemens CASTOMAT ION ANALOGINPUT T001 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200iS Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200AL Technisches Dokument

Siemens

Siemens SIMATIC ET 200AL Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Benutzerhandbuch

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens FDCI221 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung