Siemens Simatic S7-1500 Bedienungsanleitung

CPU 1515-2 PN

(6ES7515-2AM00-0AB0)

___________________

___________

___________________

SIMATIC

S7-1500

CPU 1515-2 PN

(6ES7515-2AM00-0AB0)

Manual

12/2014

A5E32332431-AB

Preface

Documentation guide

Product overview

Connecting up

Interrupts, error messages,

diagnostics and system

alarms

Technical specifications

Dimensional drawing

Siemens AG

Division Digital Factory

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E32332431-AB

Ⓟ12/2014 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury

will

result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury

may

result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

CPU 1515-2 PN (6ES7515-2AM00-0AB0)

4Manual, 12/2014, A5E32332431-AB

Preface

Purpose of the documentation

This manual supplements the system manual of the S7-1500 automation system and the

function manuals. All cross-system functions are described in the system manual and in the

function manuals.

The information provided in this manual and the system manual allows you to commission

the CPU 1515-2 PN.

Conventions

STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the

configuration and programming software "STEP 7 (TIA Portal)".

Also read the notes labeled as follows:

Note

A note contains important information on the product described in the documentation, on the

handling of the product or on the section of the documentation to which particular attention

should be paid.

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, solutions, machines, equipment and/or networks. They are

important components in a holistic industrial security concept. With this in mind, Siemens’

products and solutions undergo continuous development. Siemens recommends strongly

that you regularly check for product updates.

For the secure operation of Siemens products and solutions, it is necessary to take suitable

preventive action (e.g. cell protection concept) and integrate each component into a holistic,

state-of-the-art industrial security concept. Third-party products that may be in use should

also be considered. You can find more information about industrial security on the Internet

(http://www.siemens.com/industrialsecurity).

To stay informed about product updates as they occur, sign up for a product-specific

newsletter. You can find more information on the Internet

(http://support.automation.siemens.com).

CPU 1515-2 PN (6ES7515-2AM00-0AB0)

Manual, 12/2014, A5E32332431-AB 5

Table of contents

Preface ................................................................................................................................................... 4

1 Documentation guide .............................................................................................................................. 6

2 Product overview .................................................................................................................................... 8

2.1 Application ................................................................................................................................8

2.2 How it works............................................................................................................................10

2.3 Properties................................................................................................................................11

2.4 Operating and display elements .............................................................................................14

2.4.1 Front view of the module with closed front panel ...................................................................14

2.4.2 Front view of the module without front panel..........................................................................16

2.4.3 Rear view of the module .........................................................................................................17

2.5 Mode selector switch ..............................................................................................................17

2.6 Functions ................................................................................................................................18

2.6.1 PROFINET IO .........................................................................................................................18

2.6.2 PROFIenergy ..........................................................................................................................19

2.6.3 Memory reset ..........................................................................................................................19

2.6.4 Restoring the factory settings of the CPU...............................................................................21

3 Connecting up....................................................................................................................................... 24

4 Interrupts, error messages, diagnostics and system alarms................................................................... 28

4.1 Status and error display of the CPU .......................................................................................28

5 Technical specifications ........................................................................................................................ 31

A Dimensional drawing............................................................................................................................. 41

CPU 1515-2 PN (6ES7515-2AM00-0AB0)

6Manual, 12/2014, A5E32332431-AB

Documentation guide

The documentation for the SIMATIC S7-1500 automation system and the SIMATIC

ET 200MP distributed I/O system is arranged into three areas.

This arrangement enables you to access the specific content you require.

Basic information

System Manual and Getting Started describe in detail the configuration, installation, wiring

and commissioning of the SIMATIC S7-1500 and ET 200MP systems. The STEP 7 online

help supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, terminal diagrams, characteristics and technical specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

S7-1500 and ET 200MP systems, e.g. diagnostics, communication, Motion Control, Web

server.

You can download the documentation free of charge from the Internet

(http://www.automation.siemens.com/mcms/industrial-automation-systems-

simatic/en/manual-overview/tech-doc-controllers/Pages/Default.aspx).

Changes and supplements to the manuals are documented in a Product Information.

Documentation guide

CPU 1515-2 PN (6ES7515-2AM00-0AB0)

Manual, 12/2014, A5E32332431-AB 7

Manual Collection S7-1500/ET 200MP

The Manual Collection contains the complete documentation on the SIMATIC S7-1500

automation system and the ET 200MP distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(http://support.automation.siemens.com/WW/view/en/86140384).

My Documentation Manager

The My Documentation Manager is used to combine entire manuals or only parts of these to

your own manual.

You can export the manual as PDF file or in a format that can be edited later.

You can find the My Documentation Manager on the Internet

(http://support.automation.siemens.com/WW/view/en/38715968).

Applications & Tools

Applications & Tools supports you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus in individual products.

You can find Applications & Tools on the Internet

(http://support.automation.siemens.com/WW/view/en/20208582).

CAx Download Manager

The CAx Download Manager is used to access the current product data for your CAx or CAe

systems.

You configure your own download package with a few clicks.

In doing so you can select:

●Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN

macro files

●Manuals, characteristics, operating manuals, certificates

●Product master data

You can find the CAx Download Manager on the Internet

(http://support.automation.siemens.com/WW/view/en/42455541).

TIA Selection Tool

With the TIA Selection Tool, you can select, configure and order devices for Totally

Integrated Automation (TIA).

This tool is the successor of the SIMATIC Selection Tool and combines the known

configurators for automation technology into one tool.

With the TIA Selection Tool, you can generate a complete order list from your product

selection or product configuration.

You can find the TIA Selection Tool on the Internet

(http://w3.siemens.com/mcms/topics/en/simatic/tia-selection-tool).

CPU 1515-2 PN (6ES7515-2AM00-0AB0)

8Manual, 12/2014, A5E32332431-AB

Product overview

2.1

Application

The CPUs of the SIMATIC S7-1500 controller family offer best possible performance

combined with excellent usability. With their integrated PROFINET/PROFIBUS interfaces,

the Web server and integrated functionalities, such as Motion Control, PID controller and

temperature controller, trace support, the CPUs are predestined for numerous applications in

automation engineering.

Performance segments

The CPUs can be used for smaller and mid-range applications, as well as for the high-end

area of machine and plant automation.

CPU

Performance segment

PROFIBUS

interfaces

PROFINET

interfaces

Work

memory

Processing time

for bit

operations

CPU 1511-1 PN Standard CPU for smaller to mid-range

applications

-- 1 1.15 MB 60 ns

CPU 1511F-1 PN Fail-safe CPU for smaller to mid-range

applications

-- 1 1.23 MB 60 ns

CPU 1513-1 PN Standard CPU for mid-range

applications

-- 1 1.8 MB 40 ns

CPU 1513F-1 PN Fail-safe CPU for mid-range

applications

-- 1 1.95 MB 40 ns

CPU 1515-2 PN Standard CPU for mid-range to large

applications

-- 2 3.5 MB 30 ns

CPU 1515F-2 PN Fail-safe CPU for mid-range to large

applications

-- 2 3.75 MB 30 ns

CPU 1516-3 PN/DP Standard CPU for high-end applica-

tions and communication tasks

1 2 6 MB 10 ns

CPU 1516F-3 PN/DP Fail-safe CPU for high-end applications

and communication tasks

1 2 6.5 MB 10 ns

CPU 1517-3 PN/DP Standard CPU for demanding

applications and communication tasks

1 2 10 MB 2 ns

CPU 1517F-3 PN/DP Fail-safe CPU for demanding

applications and communication tasks

1 2 11 MB 2 ns

CPU 1518-4 PN/DP Standard CPU for high-performance

applications, demanding communica-

tion tasks and very short reaction times

1 3 24 MB 1 ns

CPU 1518F-4 PN/DP Fail-safe CPU for high-performance

applications, demanding communica-

tion tasks and very short reaction times

1 3 26 MB 1 ns

Product overview

2.1 Application

CPU 1515-2 PN (6ES7515-2AM00-0AB0)

Manual, 12/2014, A5E32332431-AB 9

Integrated technology functions

The CPUs of the SIMATIC S7-1500 family support Motion Control functions. STEP 7 offers

PLCopen standardized blocks for configuring and connecting a drive to the CPU. Motion

Control supports speed, positioning and synchronous axes, as well as external encoders.

For effective commissioning, diagnostics and fast optimization of drives and controls, the

SIMATIC S7-1500 controller family offers extensive trace functions for all CPU tags.

In addition to drive integration, the SIMATIC S7-1500 has extensive control functionalities,

such as easy-to-configure blocks for automatic optimization of the controller parameters for

optimized control quality.

Technology modules also implement functions such as high-speed counting, position

detection and measuring functions for 24 V signals up to 200 kHz.

Due to the integrated technology function, the CPUs are suitable, for example, for pumps,

fans, mixers, conveyor belts, lifting platforms, gate control systems, building management

systems, synchronized axes, cross cutters, etc.

Security Integrated

The CPUs are aimed at users that require the maximum possible plant security.

In combination with STEP 7, each CPU offers password-based know-how protection against

unauthorized reading or modifying of the program blocks.

The copy protection provides high-performance protection against unauthorized reproduction

of program blocks. The copy protection can be used to link individual blocks on the SIMATIC

memory card with their serial numbers. The block can only be executed if the configured

memory card is inserted in the CPU.

In addition, four different authorization levels in the CPUs can be used to assign different

access right to various user groups.

Improved manipulation protection allows the CPUs to detect changed or unauthorized

transfers of the engineering data.

Safety Integrated

The fail-safe CPUs are aimed at users that want to implement demanding standard and

fail-safe applications in both a centralized and a distributed manner.

These fail-safe CPUs allow the processing of standard and safety programs on a single

CPU. This allows fail-safe data to be evaluated in the standard user program. This

integration thus provides the system advantages and the extensive functionality of SIMATIC

also for fail-safe applications.

The fail-safe CPUs are certified for use in safety mode up to:

●Safety class (Safety Integrity Level) SIL 3 according to IEC 61508:2010

●Performance Level (PL) e and Category 4 according to ISO 13849-1:2006 or according to

EN ISO 13849-1:2008

Additional password protection for F-configuration and F-program is set up for IT security.

Product overview

2.2 How it works

CPU 1515-2 PN (6ES7515-2AM00-0AB0)

10 Manual, 12/2014, A5E32332431-AB

Design and handling

The design and handling of the CPUs is very straightforward and offers the greatest possible

user friendliness. All CPUs have a display. The display provides information on order

numbers, firmware version and serial numbers of all connected modules. The IP address of

the CPU and other network settings can be set directly on site, without a programming

device. The display shows occurring errors messages directly as plain text multi-lingual

messages and helps you to reduce downtimes.

System diagnostics

Integrated system diagnostics is activated by default for the CPUs. The different diagnostic

types are configured instead of programmed. System diagnostics information is shown

uniformly and in plain text on the display of the CPU, in STEP 7, on the HMI and on the Web

server, even for alarms related to drives. This information is available in RUN mode, but also

in STOP mode of the CPU. An automatic update of the diagnostics information is performed

when you configure new hardware components.

2.2

How it works

The CPU contains the operating system and executes the user program. The user program

is located on the SIMATIC memory card and is processed in the work memory of the CPU.

The PROFINET interfaces on the CPU allow simultaneous communication with PROFINET

devices, PROFINET controllers, HMI devices, programming devices, other controllers and

other systems. CPU 1515-2 PN supports operation as an IO controller and I-device.

IO controller

As an IO controller, CPU 1515-2 PN sends and receives data and signals from the

connected IO devices within a PROFINET IO system. You can operate the CPU with a

maximum of 256 IO devices, of which a maximum of 64 may be IRT (Isochronous Realtime)

devices.

I-device

In the "I-device" (intelligent IO device) function, CPU 1515-2 PN not only controls its own

central modules, but also acts as an I-device, exchanging data with a higher-level IO

controller. CPU 1515-2 PN thus fulfills the role of an intelligent pre-processing unit for

sub-processes.

Andere Handbücher für Simatic S7-1500

Inhaltsverzeichnis

Andere Siemens E/A-System Handbücher

Siemens

Siemens SIMATIC ET 200eco Bedienungsanleitung

Siemens

Siemens DQ 4x24VDC/2A HS Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC IM151-1 STANDARD Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens simatic ET 200MP Benutzerhandbuch

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens FDCI222 Bedienungsanleitung

Siemens

Siemens BANY Agent Administratorhandbuch

Siemens

Siemens TX-I/O Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC RQ 4x120VDC-230VAC/5A CO HA Bedienungsanleitung

Siemens

Siemens 7XV5673 Anwendungshandbuch

Siemens

Siemens ION PROFIBUS DP SPY T001 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP HA Technisches Dokument

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens MICROMASTER 440 GX Technische Daten

Siemens

Siemens FDCIO181-2 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200AL Benutzerhandbuch

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung