Siemens 6GT2890-0BC00 Administratorhandbuch

C79000-G8976-C403-01, 04/2015 1

SIMATIC Ident

RFID systems

Power splitter for RF600 systems

Compact Operating Instructions

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The

notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage

have no safety alert symbol. These notices shown below are graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of

injury to persons with a safety alert symbol may also include a warning relating to property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific task in accordance with

the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their

training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products

and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage,

installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any

problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.

Power splitter for RF600 systems

2C79000-G8976-C403-01, 04/2015

Characteristics

Using the power splitter, two antennas can be connected to one antenna connector of a reader. The power fed in at the input

(S) is split over two outputs (1, 2).

Power splitter

Characteristics

Application Designed for distributed mounting of

antennas in warehouses, logistics and

distribution

Connectable readers

All readers of the RF600 system

Connectable antennas •

SIMATIC RF620A

•SIMATIC RF640A

•SIMATIC RF642A

•SIMATIC RF660A

Degree of protection IP40

Ordering data

Table 2-1 Power splitter ordering data

Article number

Power splitter

6GT2890-0BC00

Table 2-2 Power splitter ordering data for accessories

Article number

Antenna cable

1 m, 0.5 dB

6GT2815-0BH10

3 m, 1 dB

6GT2815-0BH30

5 m, 1.25 dB

6GT2815-2BH50

10 m, 2 dB

6GT2815-1BN10

10 m, 4 dB 6GT2815-0BN10

15 m, 4.5 dB

6GT2815-2BN15

20 m, 4 dB 6GT2815-0BN20

40 m, 5 dB

6GT2815-0BN40

Power splitter for RF600 systems

C79000-G8976-C403-01, 04/2015 3

Example of a configuration

The following example of a configuration shows a setup with one RF680R reader, one power splitter and two RF640A

antennas.

Figure 3-1 Example of a configuration with an RF600 system with a power splitter

The link between the reader and the power splitter (3.2 dB attenuation) is via a cable 1 m in length (0.5 dB cable

attenuation). Between the power splitter and the antennas a cable with a length of 3 m (1 dB cable attenuation) and a cable

with a length of 5 m (1.25 dB cable attenuation) are used.

To calculate the total attenuation made up of the cable attenuation and the attenuation of the power splitter, the branch with

the lowest cable attenuation must be considered. For the configuration shown above, the total attenuation is as follows:

0.5 dB + 3.2 dB + 1 dB = 4.7 dB

The total attenuation of 4.7 dB must be stored in the configuration of the reader as user-defined cable attenuation. When

using several different antennas, the antenna gain of the antenna with the highest gain must be specified. This ensures that

the maximum permitted transmit power is not exceeded.

Note that when using different antenna cable lengths, the radiated power of the antenna with the longer cable is lower.

Technical specifications

Table 4-1 Technical specifications

6GT2890-0BC00

Product type designation

Power splitter

Electrical data

Transmission frequency

500 ... 1000 MHz

Max. input power

10 W

Impedance

50 Ω

Attenuation between

input and outputs

3.2 dB

Connector

(input/outputs)

RTNC plug

Mechanical specifications

Housing

•

Material

•

Aluminum

•Color

•Silver

Power splitter for RF600 systems

4C79000-G8976-C403-01, 04/2015

6GT2890-0BC00

Permitted ambient conditions

Ambient temperature

•

During operation

•

-40 to +85 ℃

•

During transportation and storage

•

-40 to +100 ℃

Degree of protection to EN 60529

IP40

Design, dimensions and weights

Dimensions (L × W × H)

•

Without plug

•

50.8 × 50.8 × 19.05 mm

•With plug

•74.7 × 50.8 × 19.05 mm

Weight

170 g

Dimension drawing

Figure 5-1 Power splitter dimension drawing

All dimensions in mm

Power splitter for RF600 systems

C79000

-G8976-C403-01, 04/2015

Trademarks

All names identified by ® are registered trademarks of

Siemens AG. The remaining trademarks in this publication may be trademarks

whose

use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since varia

nce cannot

be prec

luded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any

necessary corrections are included in subsequent editions.

Siemens AG

Division Process Industries and Drives

Postfach 48 48

90026 NÜRNBERG

Andere Siemens Medienkonverter Handbücher

Siemens

Siemens 7XV5662-0AA00 Handbuch

Siemens

Siemens 7XV5652-0xA00 Series Bedienungsanleitung

Siemens

Siemens SINAMICS G120 Bedienungsanleitung

Siemens

Siemens PPX:505–6860 RS-485/RF I/O Bedienungsanleitung

Siemens

Siemens 7XV5662-0AA00/GG Handbuch

Siemens

Siemens SIMATIC ET 200S Stücklistenhandbuch

Siemens

Siemens SINAMICS S120 Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE XCM-100 Technisches Dokument

Siemens

Siemens SINAMICS S150 NEMA Bedienungsanleitung

Siemens

Siemens 6RA7086-6KS22 Bedienungsanleitung

Siemens

Siemens MC-ENCODER Bedienungs- und Montageanleitung

Siemens

Siemens SINAMICS G110M Bedienungsanleitung

Siemens

Siemens 6RA70 Series Installationsanleitung

Siemens

Siemens SINAMICS G120X Bedienungsanleitung

Siemens

Siemens SINAMICS G110D Bedienungsanleitung

Siemens

Siemens SINAMICS G120C Bedienungsanleitung

Siemens

Siemens SIPROTEC 7XV5662-0AD0 Series Bedienungsanleitung

Siemens

Siemens Simodrive 611 Merkblatt

Siemens

Siemens 7XV5651-0 A00 Series Bedienungsanleitung

Siemens

Siemens SINAMICS G110M Bedienungsanleitung

Siemens

Siemens SINAMICS MV 9LD4110-7EX70-1AA0 Bedienungsanleitung

Siemens

Siemens SINAMICS G120D Bedienungsanleitung

Siemens

Siemens SINAMICS G120X Bedienungsanleitung

Siemens

Siemens 7XV5662-0AD00/DD Handbuch

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung