Siemens SIMATIC NET Series Bedienungsanleitung

___________________

SIMATIC NET

Industrial Wireless LAN

Approvals SCALANCE W1700

802.11ac

Reference Manual

11/2018

C79000

-G8976-C487-02

SCALANCE W1788-x

Siemens AG

Division Process Industries and Drives

Postfach 48 48

90026 NÜRNBERG

GERMANY

C79000-G8976-C487-02

Ⓟ

10/2018 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Approvals SCALANCE W1700 802.11ac

Reference Manual, 11/2018, C79000-G8976-C487-02 3

Table of contents

1 SCALANCE W1788-x ............................................................................................................................. 7

1.1 Type designations.....................................................................................................................8

1.2 EC declaration of conformity.....................................................................................................9

1.2.1 ATEX.......................................................................................................................................10

1.2.2 RoHS.......................................................................................................................................11

1.2.3 RED.........................................................................................................................................11

1.2.3.1 Protection of health and safety ...............................................................................................11

1.2.3.2 EMC ........................................................................................................................................12

1.2.3.3 Efficient use of the radio spectrum .........................................................................................13

1.2.4 Products..................................................................................................................................13

1.3 General approvals...................................................................................................................14

1.4 National approvals ..................................................................................................................19

Table of contents

Approvals SCALANCE W1700 802.11ac

4Reference Manual, 11/2018, C79000-G8976-C487-02

Approvals SCALANCE W1700 802.11ac

Reference Manual, 11/2018, C79000-G8976-C487-02 5

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be

connected to an enterprise network or the internet if and to the extent such a connection is

necessary and only when appropriate security measures (e.g. firewalls and/or network

segmentation) are in place.

For additional information on industrial security measures that may be implemented, please

visit https://www.siemens.com/industrialsecurity.

Siemens’ products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers’ exposure

to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under https://www.siemens.com/industrialsecurity.

SCALANCE W1788-x

Approvals SCALANCE W1700 802.11ac

6Reference Manual, 11/2018, C79000-G8976-C487-02

Approvals SCALANCE W1700 802.11ac

Reference Manual, 11/2018, C79000-G8976-C487-02 7

SCALANCE W1788-x

Note

Issued approvals on the type plate of the device

The specified approvals apply only when the corresponding mark is printed on the product.

You can check which of the following approvals have been

granted for your product by the

markings on the type plate.

SCALANCE W1788-x

1.1 Type designations

Approvals SCALANCE W1700 802.11ac

8Reference Manual, 11/2018, C79000-G8976-C487-02

1.1

Type designations

Scope of validity

The approvals listed in this section apply to the following products:

Product

Article number

Access point

SCALANCE W1788-1 M12 6GK5788-1GY01-0AA0

Dual access points

SCALANCE W1788-2 M12

6GK5788-2GY01-0AA0

SCALANCE W1788-2 M12 EEC

6GK5788-2GY01-0TA0

SCALANCE W1788-2IA M12

6GK5788-2HY01-0AA0

Abbreviations used

Some approvals apply only to certain devices or series. In such situations, the designations

of the products are shortened to avoid having to list all the type designations. The following

table shows how the abbreviations relate to the product variants.

Designation

Product

SCALANCE W1788-x SCALANCE W1788-1 M12

SCALANCE W1788-2 M12

SCALANCE W1788-2 M12 EEC

SCALANCE W1788-2IA M12

SCALANCE W1788-x

1.2 EC declaration of conformity

Approvals SCALANCE W1700 802.11ac

Reference Manual, 11/2018, C79000-G8976-C487-02 9

1.2

EC declaration of conformity

The EC Declaration of Conformity is available for all responsible authorities at:

Siemens Aktiengesellschaft

Process Industries and Drives Division,

Process Automation

DE-76181 Karlsruhe

Germany

You can find the current EU declaration of conformity for these products on the Internet

pages under Siemens Industry Online Support

(https://support.industry.siemens.com/cs/ww/en/ps/15853/cert).

The SIMATIC NET products described in this document meet the requirements of the

following EU directives:

●ATEX directive 2014/34/EU

Directive of the European Parliament and the Council of 26 February 2014 on the

approximation of the laws of the member states concerning equipment and protective

systems intended for use in potentially explosive atmospheres, official journal of the EU

L96, 29/03/2014, pages 309–356

●RoHS directive 2011/65/EU

Directive of the European Parliament and of the Council of 8 June 2011 on the restriction

of the use of certain hazardous substances in electrical and electronic equipment, official

journal of the EC L174, 01/07/2011, pages 88-110

●Radio equipment directive 2014/53/EU (RED, Radio Equipment Directive)

Directive of the European Parliament and of the Council of 16 April 2014 on the

harmonization of the laws of the member states relating to placing radio equipment on the

market; official journal of the EU L153, 22/05/2014, pages 62–106

SCALANCE W1788-x

1.2 EC declaration of conformity

Approvals SCALANCE W1700 802.11ac

10 Reference Manual, 11/2018, C79000-G8976-C487-02

1.2.1

ATEX

ATEX directive (correct usage in potentially explosive atmospheres)

The SIMATIC NET product meets the requirements of the EU directive 2014/34/EU

"Equipment and Protective Devices for Use in Potentially Explosive Atmospheres" according

to the standards listed in the section "Products (Page 13)" to one of the following types of

protection:

Type of protection

Applied standards

1 ✓✓EN 60079-0 + A11

Hazardous areas - Part 0: Equipment - General requirements

2 ✓- EN 60079-15

Explosive atmospheres - Part 15: Equipment protection by type of

protection "n"

3 - ✓EN 60079-7

Explosive atmospheres - Part 7: Equipment protection through

increased safety "e"

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Netzwerkkarte Handbücher

Siemens

Siemens SIMATIC NET CP 343-1 Bedienungsanleitung

Siemens

Siemens SIMATIC NET CP 1623 Bedienungsanleitung

Siemens

Siemens DTU3005-B Bedienungsanleitung

Siemens

Siemens NRC Bedienungsanleitung

Siemens

Siemens S5-135U/155U Benutzerhandbuch

Siemens

Siemens TIWAY I TI505 Bedienungsanleitung

Siemens

Siemens AFI5100 Bedienungsanleitung

Siemens

Siemens SIMATIC PCS 7 Referenzhandbuch

Beliebte Netzwerkkarte Handbücher anderer Marken

FirstComm

FirstComm OBiWiFi5G Bedienungsanleitung

Sun Microsystems

Sun Microsystems Interface Adapter Bedienungsanleitung

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

YASKAWA

YASKAWA SI-EN3 Bedienungsanleitung

Paradyne

Paradyne BitStorm 2600 IP DSLAM Bedienungsanleitung

Belkin

Belkin F5D7050 Bedienungsanleitung

3Com

3Com EtherLink 3C509B Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITX Bedienungsanleitung

Cisco

Cisco MC16E Bedienungsanleitung

Delta Electronics

Delta Electronics Braking Modules VFDB Series Bedienungsanleitung

TwinMOS

TwinMOS Booming Bedienungsanleitung

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Bedienungsanleitung

Buffalo

Buffalo AirStation WLI-PCM-L11GP Bedienungsanleitung

National Instruments

National Instruments NI 9234 Bedienungsanleitung

Bose

Bose PowerMatch Dante Bedienungsanleitung

Compaq

Compaq Wireless LAN 100 Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITXR Bedienungsanleitung

Gigafast

Gigafast EE101-AEX Bedienungsanleitung