Siemens SINAMICS DCM Montageanleitung

SINAMICS

DCM

Mounting kit to increase the

degree of protection to IP20

Hardware Installation Manual

02/2021

A5E34871844B

Preface

Ordering data

Description

Assembling

(Type) test

Appendix

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

Document order number: A5E34871844B

Ⓟ

03/2021 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Mounting kit to increase the degree of protection to IP20

Hardware Installation Manual, 02/2021, A5E34871844B 3

Preface

DANGER

Failure to observe the general safety instructions and residual risks

If the general safety instructions and remaining risks are not observed, accidents can occur

involving severe injuries or death.

•Comply with the general safety instructions in Chapter 1 of the SINAMICS DCM DC

Converter Operating Instructions.

•Take special care to ensure that the unit is brought into a no-voltage condition and

locked out before carrying out any work.

Note

If you want additional information or if exceptional problems arise that are not addressed in

sufficient detail in this Hardware Installation Manual, you can request the required

information from your local Siemens office.

We would also like to point out t

hat the contents of this Hardware Installation Manual are

neither part of nor modify any prior or existing agreement, commitment or contractual

relationship. The Purchase Agreement contains the complete and exclusive obligations of

Siemens, including the w

arranty provisions. Any statements contained in this Hardware

Installation Manual neither expand nor restrict the scope of these contractual warranty

conditions.

Service

You can find information on our services and regional contact persons in the Internet -

(https://support.industry.siemens.com/sc/ww/en/sc)

Technical Support

Our technical support can provide you with technical assistance for products, systems, and

solutions:

Service (https://support.industry.siemens.com/sc/ww/en/sc)

Preface

Mounting kit to increase the degree of protection to IP20

4Hardware Installation Manual, 02/2021, A5E34871844B

Central hotlines for SINAMICS DCM technical support

European and African time

zone

Service Request

(https://support.industry.siemens.com/My/ww/en/requests#create

Request)

America time zone

24-hour hotline: +1 800 333 7421

Tel.: +1 423 262 2960

Fax: +1 423 262 2200

email (mailto:support.america.automation@siemens.com)

8:00 to 17:00

Eastern Standard Time

Asia/Australia time zone

Tel.: +86 1064 757575

Fax: +86 1064 747474

email (mailto:[email protected])

7:30 to 17:30

Beijing local time

SINAMICS DCM documentation available

SINAMICS DCM DC Converters Operating Instructions

contains all information on

ordering, installation, connecting, commissioning, maintaining, description of functions,

and service

SINAMICS DCM Control Modules Operating Instructions

contains all information on

ordering, installation, connecting, commissioning, maintaining, description of functions,

and service

SINAMICS DCM List Manual (for DC converters and control modules)

Contains

parameter list, function diagrams, list of faults and alarms

SINAMICS free function blocks, function description

Includes a general description, list of parameters, the function block diagrams as well as

the list of faults and alarms.

Manuals and application notes on the Internet

The manuals and application documents are also available in the Internet:

Manuals (https://support.industry.siemens.com/cs/ww/en/ps/13298/man)

The list of general conditions available there include current supplements to the manuals.

The notes included in the general condition lists have a higher priority than the statements

made in the manuals.

Mounting kit to increase the degree of protection to IP20

Hardware Installation Manual, 02/2021, A5E34871844B 5

Table of contents

Preface ................................................................................................................................................... 3

1 Ordering data ........................................................................................................................................ 7

2 Description............................................................................................................................................. 9

3 Assembling .......................................................................................................................................... 13

4 (Type) test............................................................................................................................................ 17

A Appendix ............................................................................................................................................. 19

Table of contents

Mounting kit to increase the degree of protection to IP20

6Hardware Installation Manual, 02/2021, A5E34871844B

Mounting kit to increase the degree of protection to IP20

Hardware Installation Manual, 02/2021, A5E34871844B 7

Ordering data

Table 1- 1 Ordering data

Article

Article number

Mounting kit to increase the degree of protection to IP20 for 15 A to 30 A units

6RX1800-0MA00

Mounting kit to increase the degree of protection to IP20 for 60 A to 280 A units

6RX1800-0MA01

Mounting kit to increase the degree of protection to IP20 for 400 A to 600 A units

6RX1800-0MA02

Mounting kit to increase the degree of protection to IP20 for 720 A to 850 A units

6RX1800-0MA03

The mounting kits are supplied packed in a cardboard box. A product packaging label is

attached to the cardboard box.

Avoid heavy vibration and severe shocks during transportation, e.g. when the cabinet is

lowered into position.

Follow the instructions on the packaging concerning transportation, storage, and proper

handling.

If you discover any damage that has occurred in transit, please inform your shipping agent

immediately.

The packaging can be disposed of in accordance with local regulations for cardboard

packaging.

Ordering data

Mounting kit to increase the degree of protection to IP20

8Hardware Installation Manual, 02/2021, A5E34871844B

Andere Handbücher für SINAMICS DCM

Inhaltsverzeichnis

Andere Siemens Rack & Stand Handbücher

Siemens

Siemens d800 Bedienungsanleitung

Siemens

Siemens Flange Mount Kit Bedienungsanleitung

Siemens

Siemens 8PQ9800-4AA11 Bedienungsanleitung

Siemens

Siemens 3KX3 Bedienungsanleitung

Siemens

Siemens KNX GAMMA AP 258E11 Bedienungsanleitung

Siemens

Siemens 8PQ9800-0AA18 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

Siemens

Siemens SIPART PS2 Handbuch

Siemens

Siemens FC300 Bedienungsanleitung

Siemens

Siemens VNT-MP Bedienungsanleitung

Siemens

Siemens 8PQ9801-0AA08 Bedienungsanleitung

Siemens

Siemens 8PQ9800-4AA83 Bedienungsanleitung

Siemens

Siemens 8PQ9800-3AA43 Bedienungsanleitung

Siemens

Siemens 8PQ9802-7AA53 Bedienungsanleitung

Siemens

Siemens 8PQ9801-2AA15 Bedienungsanleitung

Siemens

Siemens 8PQ9802-7AA11 Bedienungsanleitung

Siemens

Siemens SENTRON 3VL160 Bedienungsanleitung

Siemens

Siemens 8MF1 2AS30 Series Bedienungsanleitung

Siemens

Siemens 3VL/3VA Bedienungsanleitung

Siemens

Siemens 8PQ9800-4AA21 Bedienungsanleitung

Siemens

Siemens 8GK4 801-2KK13 Benutzerhandbuch

Siemens

Siemens H1600 Bedienungsanleitung

Siemens

Siemens 3AS110B Bedienungsanleitung

Siemens

Siemens 3WL Series Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung