Siemens 2000 Series Bedienungsanleitung

Quick Reference Guide

Document No. 129-363

May 13, 2015

Series 2000 (Interactive) Room

Temperature Sensors, TEC, Standard

Design and Semi-Flush Mount

Item Number 129-363, Rev. DAPage 1 of 3

Overview

For high-end Terminal Equipment Controller (TEC)

applications, these sensors allow users to view and

adjust points in the controller using the sensor buttons

and digital display.

A user-programmable display allows the simultaneous

monitoring of the temperature, a user-selected point

and day/night operation status.

Features

•User-programmable two-line liquid crystal

display

•Simultaneous display of temperature, a user-

selected point, and day/night operation status

•Backward compatibility with all TECs, including

PTECs.

•Hardware-protected security

•Standard RJ-11 terminated cable

•No separate power source requirement

•Digital (error-free) setpoint adjustment

Product Numbers

Description Product Number

Desert Beige

White

TEC Sensors

540-650A

540-650B

TEC Sensors with

Fan-Speed

Control (Momentary

contact)

540-652A

540-652B

TEC Semi-Flush

Mount

−

QAA1280FWSC

Accessories

Description Product Number

Passkey

544-643A

Computer cable

540-143

Applications

•Operating rooms

•Laboratories

•Isolation rooms, with pressurization as the

critical point

•Other difficult control spaces

•Executive suites and other high-profile areas

Operation

Buttons

The function of each button varies, depending on the

current screen. For detailed instructions, see Operating

Instructions.

Operation modes

Figure 1. Operation Modes.

Document No. 129-363

Quick Reference Guide

May 13, 2015

Page 2 of 3Siemens Industry, Inc.

Normal

•In normal operation, no passkey or laptop is

connected.

•The sensor may be set to display the

temperature and a second important point for

the user to monitor, called the "critical" point

(such as setpoint, airflow or fan speed).

•Day operation only: Setpoints may be viewed

and adjusted in 1° increments, using the

and keys.

•The sensor displays a sun ( ) or moon ( )

indicating whether it is in day or night

operation.

•In night operation, the override button

switches the TEC to day operation for the

length of time preset in the TEC.

Passkey

Insert the passkey in the sensor MMI port to:

•View controller point numbers, descriptions,

values, units and status.

•Change or command controller point values.

•Set up the following display options:

−Turn the temperature (TEMP) display on or

off.

−Select a critical point to display, if desired.

−Select units of measure—English or

metric.

Figure 2. Inserting the Passkey.

NOTE: The Semi-Flush Mount Sensor MMI port can

only be accessed after the front housing is

removed.

Laptop

To communicate with the TEC using Datamate Base,

Datamate Advanced, or Controller Interface Software

(CIS), connect a computer-compatible cable (see

Accessories) from a laptop to the sensor MMI port at

the bottom of the sensor. This puts the sensor in laptop

mode, which deactivates all buttons and freezes or

blanks the display. In this mode, the controller

communicates only with the laptop.

Considerations

Point 00 (SETUP): The sensors reserve Point 00

(SETUP) for display setup mode, but only the sensor

recognizes this point. It does not exist in the TEC

database.

At the operator's terminal, Point 13 on the TEC always

reads priority OVRD because the room sensor is

commanding the setpoint. This is normal and cannot

be changed if Point 14 is set to Y.

Point 1 (ADDRESS) and Point 2 (APPLICATION)

cannot be changed.

Display Messages

Message

Meaning

ERROR

NO COM

Communication with the controller is lost.

-F, #F, °F

If one of these three symbols displays, a

point has failed.

PT# [xx]

The sensor is automatically loading the

point database numbers from the controller,

and displaying them as they load. This

happens: (1) the first time it is connected to

the TEC, and (2) when it is connected to

the TEC with another application.

PASS KEY

ACCEPTED

The passkey has been inserted in the MMI

port and accepted as valid.

Point value has been overridden by

operator.

TEC initial point value differs from its

factory default value.

Specifications

A 10K ohm thermistor is used to detect temperature.

The effective sensing and setpoint range is 55°F to

95°F (13°C to 35°C).

Operating Instructions

Setpoint (Day Operation Only)

1. Remove passkey (if present) from MMI port.

2. To view the setpoint screen: Press or .

3. To change the setpoint: Press or .

4. To cancel changes: Press .

5. To exit: Press or wait five seconds.

Document No. 129-363

Quick Reference Guide

May 13, 2015

Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models

as design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.

Siemens Industry, Inc.

Building Technologies Division

1000 Deerfield Parkway

Buffalo Grove, IL 60089

USA

+ 1 847-215-1000

Your feedback is important to us. If you have

comments about this document, please send them

to SBT_technical.editor.us.sbt@siemens.com

Document No. 129-363

Printed in the USA

Page 3 of 3

Night Override

1. Remove passkey (if present) from MMI port.

2. To select day operation: Press .

Viewing Point Descriptions

1. Insert passkey in MMI port.

2. To select points: Press or .

3. To exit: Remove the passkey.

Viewing/Commanding Point Values

1. Insert passkey in MMI port.

2. To select a point: Press or .

3. To view a point's value: Press .

4. To view point command cursor: Press or .

5. To select a character: Press .

6. To change a character: Press or .

7. To cancel changes: Remove the passkey.

8. To save changes: Press .

9. To return to View Pt. Descript: Press .

10. To exit: Remove passkey.

Releasing Points from Override and/or

Resetting to Factory Default Values

1. Insert passkey in MMI port.

2. To select a point: Press or .

3. To view a point's value: Press .

4. To view the point command cursor: Press or .

5. Press until * or override symbol (#) is selected.

6. To release the point: Press or .

7. To cancel changes: Remove the passkey.

8. To confirm release: Press .

9. To exit: Remove the passkey.

Setting Display Options

NOTE: Point 00 (SETUP) exist only in the sensor.

1. Insert passkey in MMI port.

2. Press or , scroll to Point 00, and press .

a. TEMP (temperature)

To display TEMP (YES/NO): Press or .

b. CRPT (critical point)

•To go to CRPT command line: Press .

•To select a point number: Press or .

•To turnoff CRPT display: Select Point 00.

c. UNITS

•Press and view the UNITS screen.

•To select English/Metric: Press or .

3. To exit and save changes: Press .

4. Remove the passkey.

Inhaltsverzeichnis

Andere Siemens Temperaturregler Handbücher

Siemens

Siemens Landis & Staefa REV11 Series Bedienungsanleitung

Siemens

Siemens REV24 Bedienungsanleitung

Siemens

Siemens AQR2531 Series Bedienungsanleitung

Siemens

Siemens RDH10RF/SET Bedienungsanleitung

Siemens

Siemens QAA2290.EWSC Bedienungsanleitung

Siemens

Siemens QAA70 Bedienungsanleitung

Siemens

Siemens RVL470 Bedienerhandbuch

Siemens

Siemens REA23.03RF Bedienungsanleitung

Siemens

Siemens QMX3.P37 Bedienungsanleitung

Siemens

Siemens REV23 Bedienungsanleitung

Siemens

Siemens REA22 Bedienerhandbuch

Siemens

Siemens QAX30.1 Bedienungsanleitung

Siemens

Siemens RDUxxx Series Bedienungsanleitung

Siemens

Siemens DT-11 Montage- und Bedienungsanleitung

Siemens

Siemens 1000 series Bedienungsanleitung

Siemens

Siemens Expert Series Kurzanleitung

Siemens

Siemens SITRANS Series Administratorhandbuch

Siemens

Siemens RDH10RF/SET Bedienungsanleitung

Siemens

Siemens RCC10U Betriebsanleitung

Siemens

Siemens RLE162 Bedienungsanleitung

Siemens

Siemens RCC30 Bedienungsanleitung

Siemens

Siemens SITRANS TS100 Administratorhandbuch

Siemens

Siemens REV24 Bedienungsanleitung

Siemens

Siemens RDJ10RF/SET Bedienungsanleitung

Beliebte Temperaturregler Handbücher anderer Marken

Swegon

Swegon LUNAd MB Bedienungsanleitung

Lucky Reptile

Lucky Reptile Thermo Control II Bedienungsanleitung

SENSORMETRIX

SENSORMETRIX Argon 100 Bedienungsanleitung

Fuji Electric

Fuji Electric PXE4 Bedienungsanleitung

Yuyao gongyi

Yuyao gongyi XMT-808 series Bedienungsanleitung

Selec

Selec TC544C Bedienungsanleitung

P.W. KEY

P.W. KEY rt-208gt Bedienungsanleitung

BH Thermal

BH Thermal BriskONE Bedienungsanleitung

West Control Solutions

West Control Solutions KS 45 Kurzanleitung

MCS

MCS RITC-15B Bedienungsanleitung

SMC Networks

SMC Networks Thermo-con INR-244-639 Bedienungsanleitung

eltherm

eltherm Ex-TC It Series Bedienungsanleitung

Omron

Omron C200H-TV Series Bedienungsanleitung

industrie technik

industrie technik CA1 Bedienungsanleitung

KRAL

KRAL EET 32 Bedienungsanleitung

dixell

dixell XR420C Verdrahtungsschema

Opt Lasers

Opt Lasers TEC-8A-24V-PID-HC Bedienungsanleitung

Vaillant

Vaillant VR 92/3 Bedienungsanleitung