Siemens SITRANS LR260 Benutzerhandbuch

1 of 2

1954 Technology Drive, P.O. Box 4225

Peterborough, Ontario

K9J 7B1 / Canada

Tel.: (705) 745-2431

Fax: (705) 741-0466

www.siemens.com/sensorsystems

Siemens Canada Limited

Siemens Milltronics Process Instruments

G050212

SITRANS LR260/LR250 hybrid use on liquid applications

Equipment: SITRANS LR260 features higher gain microwave electronics, typically 15 dB higher than the

LR250. Configurations of SITRANS LR260 electronics and LR250 with 2” threaded process

connections are available as standard catalog items and others are available by special

request. Contact your Siemens representative.

While every effort was made to verify the following information, no warranty of accuracy or usability is expressed or

implied.

Applications

Appropriate applications for the LR260/250 hybrid are:

1. Longer range applications from 20 m (66 ft) to 30 m (98 ft).

2. Applications with low dielectric AND small process connections.

3. Challenging applications where turbulence or minor foam is present.

Configurations

2 inch threaded connection versions are released and available as standard options on the SITRANS LR260 catalog sheet. Any

other SITRANS LR250 process connection option is available by special request. Contact your Siemens representative.

SITRANS LR260 with 2”NPT process connection and antenna is shown below.

APPLICATION GUIDE

SITRANS LR260/LR250 hybrid use on liquid applications

AG050212 2 of 2

APPLICATION GUIDE

Signal Comparisons (Reference Conditions)

SITRANS LR250 - 2” horn SITRANS LR260 - 2” horn

A signal to noise ratio improvement of 18 dB is shown above. This gain improvement will be obtained on any target distance.

Specifications

All specifications and approvals will be per the SITRANS LR260 except process related specifications such as pressure and

process temperature as these will be derived from the LR250 process connection specification.

LR260 Programming for optimization on liquids

1. Use the Quick start wizard to setup the application then make the following additional changes:

a. Par 2.2.4.1 Algorithm: set to tF.

b. Par 2.2.4.1.2 Echo Position: set to COM.

i. COM (Center of Mass) detection method is recommended for flat surfaces (liquids) and

RE (Rising Edge) detection method is recommended for sloped surfaces (solids)

c. Par 2.2.4.3.7 Reform: set to 0. It is recommended that this filter only be used in solids applications.

Andere Handbücher für SITRANS LR260

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Sender Handbücher

Siemens

Siemens SITRANS LR 400 Gebrauchsanweisung

Siemens

Siemens Sitrans LR250 Administratorhandbuch

Siemens

Siemens SITRANS P500 Administratorhandbuch

Siemens

Siemens SITRANS L Bedienungsanleitung

Siemens

Siemens SITRANS L Series Bedienungsanleitung

Siemens

Siemens SITRANS L Series Bedienungsanleitung

Siemens

Siemens SITRANS L Series Bedienungsanleitung

Siemens

Siemens SITRANS F M Intermag 2 Bedienungsanleitung

Siemens

Siemens 5WK4 3402 Bedienungsanleitung

Siemens

Siemens SITRANS T Series Bedienungsanleitung

Siemens

Siemens 5WG3-425-7AB21 Bedienungsanleitung

Siemens

Siemens SITRANS LH100 Administratorhandbuch

Siemens

Siemens SITRANS LR560 Bedienungsanleitung

Siemens

Siemens SITRANS TH400 Bedienungsanleitung

Siemens

Siemens Sitrans Probe LR Gebrauchsanweisung

Siemens

Siemens Sitrans LR200 Gebrauchsanweisung

Siemens

Siemens SITRANS TH400 Bedienungsanleitung

Siemens

Siemens SITRANS LR260 Bedienungsanleitung

Siemens

Siemens SITRANS LR260 Bedienungsanleitung

Siemens

Siemens SITRANS P320 Administratorhandbuch

Siemens

Siemens Sitrans LR250 Bedienungsanleitung

Siemens

Siemens TRANSMAG 2 Bedienungsanleitung

Siemens

Siemens SITRANS L LU240 Administratorhandbuch

Siemens

Siemens SITRANS TF2 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung