SIGMA TEK HGW 1033-3 Bedienungsanleitung

Date of creation: 06.08.2018 Version date: 03.03.2021 Article number: 12-246-1033-3-E

HGW 1033-3

Wireless Handheld Operating Panel

Operating Manual

Publisher: SIGMATEK GmbH & Co KG

A-5112 Lamprechtshausen

Tel.: +43/6274/4321

Fax: +43/6274/4321-18

Email: office@sigmatek.at

WWW.SIGMATEK-AUTOMATION.COM

SIGMATEK GmbH & Co KG

Translation from German

distributed in any form (print, photocopy, microfilm or in any other process) without express permission.

We reserve the right to make changes in the content without notice. SIGMATEK GmbH & Co KG is not

responsible for technical or printing errors in this handbook and assumes no responsibility for damages that

occur through its use.

WIRELESS HANDHELD OPERATING PANEL HGW 1033-3

Wireless Handheld Operating Panel HGW 1033-3

In combination with a BWH 001 base station and

a safety- related PLC, the HGW 1033- 3 is a

wireless, intelligent handheld operating unit with

an emergency stop function that enables the

programming, visualization and diagnosis of

processes and systems control.

Process data, procedures and parameters are

comfortably presented on the 10.1” display and

can be entered or changed via the touch screen.

The HGW 1033-3 can be coupled with machines

via base stations, which allows the flexible

application of the operating unit.

The interfaces can be used to configure the

terminal. The integrated battery pack allows 2

hours of operation at full capacity.

03.03.2021 Page 1

HGW 1033-3 WIRELESS HANDHELD OPERATING PANEL

Table of Contents

1 Introduction 6

1.1 Target Group/Purpose of this Operating Manual 6

1.2 Important Reference Documentation 6

1.3 Contents of Delivery 6

2 Basic Safety Guidelines 7

2.1 Symbols Used 7

2.2 Disclaimer 9

2.3 General Safety Guidelines 10

2.4 Designated Use 12

2.5 Software/Training 14

3 Standards and Guidelines 15

3.1 Residual Risks 15

3.2 Safety of the Machine or Equipment 15

3.3 Regular Technical Inspection of the Emergency Stop 16

3.4 Guidelines 16

3.4.1 Functional Safety Standards 17

3.4.2 EU Conformity Declaration 17

3.5 Safety-Relevant Parameters 18

3.6 Wireless System Operation 18

4 Technical Data 19

4.1 Performance Data 19

4.2 Electrical Requirements 20

4.3 Display 21

4.4 Input 21

4.5 Environmental Conditions 22

4.6 Wireless 23

Page 2 03.03.2021

WIRELESS HANDHELD OPERATING PANEL HGW 1033-3

4.6.1 WLAN 2.4 GHz 23

4.6.2 WLAN 5 GHz 24

4.6.3 Antennae 24

4.7 Miscellaneous 25

5 Interfaces 26

5.1 Connections Bottom 26

5.1.1 X1: USB 2.0 (Type A) 27

5.1.2 X2: USB 2.0 DualRole (Type C) 28

5.2 Rear Connectors 29

5.2.1 X15: Power/Data 30

5.3 Display 31

5.3.1 Underside 31

5.3.2 Front 32

5.3.2.1 Status LEDs 32

5.3.2.2 7-Segment (Safety) 33

5.4 WLAN 34

5.5 Acoustics 36

5.6 On/Off Button (illuminated) 37

5.7 Key Switch 38

5.8 Confirmation Switch 39

5.9 Emergency Stop (illuminated) 41

6 Mechanical Dimensions 42

6.1 HGW 42

6.2 HGW with BWH 43

7 Assembly/Installation 44

7.1 Check Contents of Delivery 44

7.2 Preparing the Hardware 44

03.03.2021 Page 3

HGW 1033-3 WIRELESS HANDHELD OPERATING PANEL

8 Status and Error Messages 45

9 Operation/Start-up 55

9.1 Note 55

9.2 Battery/Power Supply 56

9.3 WLAN Channels and Settings 56

9.4 Configuration 57

9.4.1 Example 57

9.5 Testing the Operating Area 58

9.6 Operation 58

9.6.1 General 58

9.6.2 Turning On 60

9.6.3 Coupling 60

9.6.4 Non-Safety Mode 62

9.6.5 Decoupling 63

9.6.6 Safety Functions 64

9.6.6.1 Reasons for an active safe mode 65

9.6.7 Turning Off 65

9.6.8 Evaluating Operating Elements 65

10 Help with Disruptions/Troubleshooting 66

11 Transport/Storage 67

12 Storage 68

13 Maintenance 69

13.1 Cleaning and Disinfecting the Touch Screen 69

13.2 Service 70

13.2.1 Calibrating the Touch Screen 70

13.3 Repair 71

14 Disposal 72

Page 4 03.03.2021

WIRELESS HANDHELD OPERATING PANEL HGW 1033-3

15 Accessories 73

15.1 Antennae 73

15.2 Touch Pen 73

15.3 Edge Protection 73

16 Application Information 74

16.1 Visualization 74

16.1.1 Example Application 75

16.2 Configuring Safety Components 76

16.2.1 Minimum System Requirements 76

16.2.2 Adding the HGW 1033-3 to a SAFETYDesigner Project 76

16.2.3 “SF_HGW_Login” Function Block 77

16.2.4 Key Switch 77

16.2.5 Confirmation Switch 77

16.2.6 Emergency Stop 77

16.3 HW Facts 79

16.4 Updates 79

03.03.2021 Page 5

HGW 1033-3 WIRELESS HANDHELD OPERATING PANEL

1 Introduction

1.1 Target Group/Purpose of this Operating Manual

This operating manual contains all information required for the operation of the product.

This operating manual is intended for:

lProject planners

lTechnicians

lCommissioning engineers

lMachine operators

lMaintenance/test technicians

General knowledge of automation technology is required.

Further help and training information, as well as the appropriate accessories can be found

on our website www.sigmatek-automation.com.

Our support team is happily available to answer your questions.

Please see our website for our hotline number and business hours.

1.2 Important Reference Documentation

lSafety System Handbook

lHGW 1033-X_Maintenance Manual

lHGW_BWH_Configuration Manual

lWLAN Configuration

lHW IP Address Settings

This and additional documents can be downloaded from our website or obtained through

support.

1.3 Contents of Delivery

1x HGW 1033-3

2x keys

Page 6 03.03.2021

WIRELESS HANDHELD OPERATING PANEL HGW 1033-3

2 Basic Safety Guidelines

2.1 Symbols Used

The following symbols are used in the operator documentation for warning and danger

messages, as well as informational notes.

DANGER

Danger indicates that death or serious injury will occur, if the

specified measures are not taken.

To avoid death or serious injuries, observe the all guidelines.

Danger indique une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

WARNING

Warning indicates that death or serious injury can occur, if the

specified measures are not taken.

To avoid death or serious injuries, observe the all guidelines.

Avertissement d’une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

03.03.2021 Page 7

HGW 1033-3 WIRELESS HANDHELD OPERATING PANEL

CAUTION

Caution indicates that moderate to slight injury can occur, if the

specified measures are not taken.

To avoid moderate to slight injuries, observe the all guidelines.

Attention indique une situation dangereuse qui, faute de prendre les

mesures adéquates, peut entraîner des blessures assez graves ou

légères.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

DANGER

Danger for persons with pacemakers, implanted defibrillators or other

active implants.

Danger pour les personnes portant un stimulateur cardiaque, un

défibrillateur implanté ou d'autres implants actifs

WARNING

Magnetic field warning

Alerte au champ magnétique

INFORMATION

Provides important information on the product, handling or

relevant sections of the documentation, which require

particular attention.

Page 8 03.03.2021

Andere Handbücher für HGW 1033-3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SIGMA TEK Bedienfeld Handbücher

SIGMA TEK

SIGMA TEK ETT 732 Bedienungsanleitung

SIGMA TEK

SIGMA TEK ETV 0833-3 Bedienungsanleitung

SIGMA TEK

SIGMA TEK HGT 1053 Bedienungsanleitung

SIGMA TEK

SIGMA TEK ETV 1991 Bedienungsanleitung

SIGMA TEK

SIGMA TEK ETV 0853-3 Bedienungsanleitung

SIGMA TEK

SIGMA TEK ETV 1591-H Bedienungsanleitung

SIGMA TEK

SIGMA TEK HZS 774 Bedienungsanleitung

SIGMA TEK

SIGMA TEK HBG 1011 Bedienungsanleitung

SIGMA TEK

SIGMA TEK HGT 1051 Bedienungsanleitung

SIGMA TEK

SIGMA TEK 1U619-001 Bedienungsanleitung

SIGMA TEK

SIGMA TEK HGT 835 Bedienungsanleitung

SIGMA TEK

SIGMA TEK HGW 1033 Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten