1Thank you...
... for having chosen one of signotec’s products. You purchased a robust, durable and high-tech
solution that is unrivaled in this market segment. The signotec LCD signature pad Omega serves
as an input device for signatures and is used to capture writing characteristics (biometrics)
accurately and in a high resolution as well as to display textual and graphical information on
the LCD (= Liquid Crystal Display). This LCD visualizes the signature on the pad in real time.
Furthermore, the supplied software displays the signature on the computer monitor in real time.
Before you start using the device take note of all information, warnings and precautions to
ensure that your pad lasts for many years to come. Failure to comply with these precautions
will result in the loss of your warranty and signotec will not accept any responsibility for the
repair or replacement of the pad.
The signotec LCD Signature Pad Omega was designed for the use in an office- or at the counter-
environment and was tested in exactly these operating settings. The use of the device in other
fields of application may damage it and is undertaken entirely at the user’s own risk. Avoid
extreme temperature fluctuations. The pad is neither waterproof nor explosion-proof. The signo-
tec LCD Signature Pad Omega and the supplied pen were designed for joint use. Using these
two components of the product separately will void your warranty.
2Product description
The signotec LCD signature pad Omega is a signature capture device "Made in Germany" fully
developed and produced by signotec at an unbeatable price-/performance ratio. With outside
dimensions of 180 x 191 x 15 mm it combines extreme compactness with an especially ap-
pealing design. This device enables you to set clear trends at your point- of- sale.
The powerful signature pad attracts with its flat surface without edges between sensor and
housing for ultra-ergonomic signing. Pen and sensor convey a feeling similar to writing on pa-
per. Plus, the rounded sides allow a smooth transition of the heel of the hand without any dis-
ruption of the signing process. The pen itself has the size and feel of an actual ballpoint pen
and works without electronics and power supply entirely. Replacing the passive pen is inex-
pensive and the pad can be used even if the pen is lost.
Depending on the customer’s request, the exterior of the Omega can be individually designed
with regard to its color and/or application of a logo.
3Checking product upon receipt
Check immediately upon or after receiving the product whether all of its components have been
delivered. If any component is missing, defective or visibly damaged, please contact signotec
or the signotec dealer you bought the product from within one business day. If you do not report
a missing, defective or visibly damaged component within one business day of receiving the
product, the product will be deemed compliant and accepted. After this period of time it will be
up to the discretion of the dealer whether missing, defective or visibly damaged components
will still be supplied subsequently or replaced. It is your responsibility (as the customer) to
demonstrate the non-conformity of the product upon receipt.
