1Thank you...
... for having chosen one of signotec’s products. You purchased a robust, durable and high-tech
solution that is unrivaled in this market segment. The signature pad signotec Sigma LITE serves
as an input device for signatures and is used to capture writing characteristics (biometrics)
accurately and in a high resolution. The software visualizes the signature on the computers
screen real time.
Before you start using the device take note of all information, warnings and precautions to
ensure that your pad lasts for many years to come. Failure to comply with these precautions
will result in the loss of your warranty and signotec will not accept any responsibility for the
repair or replacement of the pad.
The Signature Pad signotec Sigma LITE was designed for the use in an office- or at the counter-
environment and was tested in exactly these operating settings. The use of the device in other
fields of application may damage it and is undertaken entirely at the user’s own risk. Avoid
extreme temperature fluctuations. The pad is neither waterproof nor explosion-proof. The Sig-
nature Pad signotec Sigma LITE and the supplied pen were designed for joint use. Using these
two components of the product separately will void your warranty.
2Product description
The Signature Pad signotec Sigma LITE is entirely developed in-house “Made in Germany” and
provides decades of experience and competence. It guarantees high quality and functionality
–with a height of only one centimeter!
With its unmatched price-performance ratio and its measurement of just 160 x 120 x 10 mm
it is extremely compact and therefore ideal for the mobile use. But even if used stationary it
still stands out with its flat construction and the optional pen holder.
The signotec Sigma LITE signature pad sets a new standard for electronic signature capture
devices in terms of its size and its very good price-performance ratio. Among the device’s
unique features are the technical properties for digitizing signatures, it’s extremely flat design
and, above all, its smooth surface without edges between sensor and housing. This design en-
ables signing to be highly ergonomic.
3Checking product upon receipt
Check immediately upon or after receiving the product whether all of its components have been
delivered. If any component is missing, defective or visibly damaged, please contact signotec
or the signotec dealer you bought the product from within one business day. If you do not report
a missing, defective or visibly damaged component within one business day of receiving the
product, the product will be deemed compliant and accepted. After this period of time it will be
up to the discretion of the dealer whether missing, defective or visibly damaged components
will still be supplied subsequently or replaced. It is your responsibility (as the customer) to
demonstrate the non-conformity of the product upon receipt.
