6
Hardware Installation
1. Power off all devices, including the HDMI source
device and HDMI display.
2. ConnectyourHDMI source(suchasa Blu-rayplayer)
to the Transmitter's HDMI IN connector.
3. Connect your HDMI display (such as a LCD TV) to
the Receiver's HDMI OUT connector.
4. Connect the IR extension cables to the IR blaster and
IR receiver connector on the Transmitter and
Receiver respectively.
Skip this step if IR transmission is not needed.
5. To connect Transmitter and Receiver directly: Connect
your CAT5/6 LAN cable between the Transmitter
and Receiver. Make sure your Cat5/6 LAN cable is
securely connected and not loose.
To connect Transmitter andReceiver indirectly: Connect
theTransmitterto the inputportofaGigabit Ethernet
hub by using a Cat5/6 LAN cable, then connect the
Receiver to the output port of the Gigabit Ethernet
hub by using another Cat5/6 LAN cable.
6. Plug one of the included power adapters into the
DC5V powerjackofthetransmitter,plugthesecond
power adapter into the DC5V power jack of the
receiver,thenplugbothpoweradaptersintoreliable
power sources.
7. After the transmitter and receiver are connected, the
HDMI extender is ready for use.
