SIIG FireWire 800 M-64 Bedienungsanleitung

Introducing the FireWire 800 M-64

The FireWire 800 M-64 is designed to support both PC and

Mac computers. It provides 3 hot-pluggable Firewire

800 (1394b) ports with data transfer rates up to 800 Mbps.

Features and Benefits

•Provides 3 external FireWire 800 (1394b) ports to

connect to various FireWire devices

•Supports IEEE 1394b and backwards compatible

with 1394a-2000 and 1394-1995 standards

•Supports data transfer rates of 100, 200, 400 and

800 Mbps

System Requirements

PC:

•Pentium®or equivalent PC with an available 64-bit

or 32-bit PCI slot

•Windows®2000/XP (32-/64-bit)/Server 2003 (32-/

64-bit)/Vista (32-/64-bit)

Mac:

•Power Mac G3 (Blue & White) or later with an

available 64-bit or 32-bit PCI slot

•Mac OS 8.6-9.x, Mac OS X (v10.1.x-10.2.3): Up to 400

Mbps

•Mac OS X 10.2.4 or later: Up to 800 Mbps

FireWire 800 M-64

Quick Installation Guide

04-0445B

PackageContents

•FireWire 800 M-64 board

•1394b 9-pin to 9-pin cable and 9-pin to 6-pin adapter

•Driver CD

•Quick Installation Guide

Board Layout

Firewire 800

Ports

4-Pin Power

Connector

Figure 1. Board Layout

Note: When installed in a 32-bit PCI slot, a portion

of the edge connector will not be connected to the

PCI slot.

Hardware Installation

General instructions for installing the card are provided

below. Since the design of computer cases and

motherboards vary, refer to your computer’s reference

manual for further information, if needed.

Static Electricity Discharge may permanently damage

your system. Discharge any static electricity build up in

your body by touching your computer case for a few

seconds. Avoid any contact with internal parts and

handle cards only by their external edges.

1. Turn OFF the power to your computer and any

connectedperipheraldevice. Unplugthecomputer's

power cord.

2. Remove your computer cover and install the card in

an available PCI slot.

3. Push the board down firmly, but gently, until it is

well seated.

4. Connect an available 4-pin power connector from

the system power supply to the 4-pin power

connector on the FireWire 800 M-64 (See page 2,

Figure 1). This connection is recommended for

reliable power output.

5. Secure the card and replace the cover.

Windows Driver Installation

This section provides information on how to install the

FireWire 800 M-64 drivers.

Windows 2000

Windows2000automatically installs it's built-in FireWire

400 driver for the FireWire 800 M-64. To get the full speed

out of this controller, install the Firewire 800 driver using

the directions below.

1. Insert the driver CD. Click Start, then click Run.

Type D:\setup32.exe, click OK. (Change D: to

match your CD-ROM drive letter)

2. At the Welcome screen, click Next.

3. At the License Agreement screen, click Yes.

4. Type in your customer information, then click Next.

5. At the Destination Location screen, click Next.

6. Select Complete, then click Next.

7. At the Select Program Folder screen, click Next.

8. At the Digital Signature screen, click Yes, then click

Finish.

9. Select the restart Windows option, then click Finish.

Windows XP

Windows XP automatically installs it's built-in FireWire

400 driver for the FireWire 800 M-64. To get the full speed

out of this controller,install the Firewire 800 driver using

the directions below.

1. Insert the driver CD. Click Start, Run.

32-bit : Type D:\setup32.exe, click OK. (Change D:

to match your CD-ROM drive letter)

64-bit: Type D:\setup64.exe, click OK. (Change D:

to match your CD-ROM drive letter)

2. At the Welcome screen, click Next.

3. At the License Agreement screen, click Yes.

4. At the Destination Location screen, click Next.

5. Select Complete, then click Next.

6. At the Select Program Folder screen, click Next.

7. At the Software Installation screen, click Continue

Anyway, then click Finish.

8. Select the restart Windows option, then click Finish.

Windows Server 2003

Windows Server 2003 automatically installs it's

built-in FireWire 400 driver for the FireWire 800 M-64. To

getthefullspeed out of this controller,installtheFireWire

800 driver using the directions in the next page.

1. Insert the driver CD. Click Start, Run.

32-bit : Type D:\setup32.exe, click OK. (Change D:

to match your CD-ROM drive letter)

64-bit: Type D:\setup64.exe, click OK. (Change D:

to match your CD-ROM drive letter)

2. At the Welcome screen, click Next.

3. At the License Agreement screen, click Yes.

4. At the Destination Location screen, click Next.

5. Select Complete, then click Next.

6. At the Select Program Folder screen, click Next.

7. At the Security Alert box, click Yes. This step is for

32-bit operating system only.

8. At the Software Installation screen, click Continue

Anyway, then click Finish.

9. Select the restart Windows option, then click Finish.

WindowsVista™

Windows Vista operating system automatically installs

it's built-in FireWire 400 driver for the FireWire 800 M-64.

To get the full speed out of this controller,install the

FireWire 800 driver using the directions below.

1. Insert the driver CD. Click Start.

2. In the Start Search box:

32-bit : Type D:\setup32.exe, press Enter. (Change

D: to match your CD-ROM drive letter)

64-bit: Type D:\setup64.exe, press Enter. (Change

D: to match your CD-ROM drive letter).

2. Click Allow.

3. At the Welcome screen, click Next.

4. At the License Agreement screen, click Yes.

5. At the Destination Location screen, click Next.

6. Select Complete, then click Next.

7. At the Select Program Folder screen, click Next.

8. At the Windows Security box, click Install three

times, then click Finish.

9. Select the restart Windows option, then click Finish.

To Verify Windows Installation

1. Check Device Manger for proper installation.

For 2000/XP/Server 2003: Right click My Computer,

click Manage, then click Device Manager.

For Windows Vista: Right click Computer, click

Manage, click Continue, click Device Manager.

2. Double click 1394 Bus host controllers. Unibrain

driver/OHCI Compatible Board should be

displayed.

Mac OS Driver Installation

To ensure proper operation of the FireWire 800 M-64 in

your Mac, please visit Apple's website to obtain the latest

Firewire updates. The Apple download URL is: http://

www.info.apple.com/support downloads.html. When

youare atthe downloadpage, type FireWireintotheApple

Downloads search box, check Restrict to Downloads,

then click the search button.

Important: The information below will help you decide

whether or not to install the latest Firewire driver update.

1. Mac OS X v10.2.4 or later has built-in FireWire 800

(1394b) driver support with the operating system.

No additional driver installation is needed. The

FireWire 800 M-64 will work up to 800 Mbps.

2. Mac OS 9.1, 9.2.x, and Mac OS X v10.1.x-10.2.3 have

built-in FireWire 400 driver support with the

operating system. No driver installation is needed.

The FireWire 800 M-64 will work up to 400 Mbps.

3. Mac OS 9.0.x users should download the Firewire

software version 2.5 or later. The FireWire 800 M-64

will work up to 400 Mbps.

4. Mac OS 8.6 users should download the Firewire

software version 2.3.3. The FireWire 800 M-64 will

work up to 400 Mbps.

Connecting Devices

General installation steps are provided below. Please

review your device's user manual for more details.

Windows 2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver..., then click Next.

3. Uncheck all check boxes, then click Next.

4. Click Next, then click Finish.

Windows XP

1. At the Found New Hardware Wizard,

For XP w/SP2 or later: Select No, not this time, then

click Next.

For XP w/SP1 or earlier: Go directly to step #2.

2. SelectInstall the SoftwareAutomatically,thenclick

Next.

3. Click Continue Anyway. (Skip if not prompted)

4. Click Finish to complete the installation.

Server 2003

1. At the Found New Hardware Wizard,

For 2003 w/SP1 or later: Select No, not this time, then

click Next.

For 2003 no service pack installed: Go directly to step

#2.

2. Select Install theSoftware Automatically,then click

Next.

3. At the Security Alert box click Yes, or the Hardware

Installation box click Continue Anyway, then click

Finish to complete the installation.

Windows Vista

Windows Vista will automatically detect and install the

drivers for most FireWire devices when connected.

However, for devices that do not install automatically,

follow the steps below to complete the installation.

1. Click Locate and install driver software.

2. Click Continue to complete the installation.

Mac OS

MacOS willautomaticallydetectandinstall mostFireWire

devices when connected. For devices that do not install

automatically, additional drivers may be required. Refer

to the device's users manual for more information.

ubSwitch Utility (for Windows only)

In order to use a DV camcorder with this controller,

Microsoft's FireWire 400 driver must be installed in the

system. We have supplied an easy to use utility that

allows switching between Microsoft's driver and the

FireWire 800 driver. Before using this utility, unplug all

devices from the FireWire 800 card.

1. Click Start, Programs, Unibrain ubcore, Tools then

ubSwitch.

2. Right click the ubSwitch icon located in the system

tray by the clock.

3. Click the 1394 Adapter that you want to switch, then

click on Microsoft 1394 Drivers.

Note: If your system has multiple 1394 adapters

installed, make sure that you click on the 1394

adapter that the camcorder will be plugged into.

4. Windows will display an information box when the

driver is ready for use. It may take a few seconds for

this box to appear.

Note: To switch back to the FireWire 800 driver,

follow the same procedures, but in step 3 instead of

clickingon Microsoft1394 Drivers,click onUnibrain

1394 Drivers.

Andere Handbücher für FireWire 800 M-64

Inhaltsverzeichnis

Andere SIIG Controller Handbücher

SIIG

SIIG eSATA II PCIe Pro Bedienungsanleitung

SIIG

SIIG Smart Controller for HDMI over IP Series Bedienungsanleitung

SIIG

SIIG UltraATA 133 PCI Bedienungsanleitung

SIIG

SIIG UltraATA 133 PCI Bedienungsanleitung

SIIG

SIIG USB SoundWave 7.1 Pro Bedienungsanleitung

SIIG

SIIG CE-E01012-S1 Bedienungsanleitung

SIIG

SIIG CE-S00012-S2 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch