SIIG AV-GM0973-S1 Bedienungsanleitung
3G/HD/SD-SDI Pattern Generator
P/N: AV-GM0973-S1
Safety and Notice
The AV-GM0973-S1 3G/HD/SD-SDI Pattern Generator has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all
electronic equipments, the AV-GM0973-S1 should be used with care. Please read and follow the
safety instructions to protect yourself from possible injury and to minimize the risk of damage to the
unit.
●Follow all instructions and warnings marked on this unit.
●Do not attempt to service this unit yourself, except where explained in this manual.
●Provide proper ventilation and air circulation and do not use near water.
●Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
●Use only the power adapter and power cords and connection cables designed for this unit.
●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
TABLE OF CONTENTS
INTRODUCTION................................................................................................................2
FEATURES ........................................................................................................................2
PACKAGE CONTENTS......................................................................................................2
SPECIFICATIONS..............................................................................................................2
MENU OPERATION...........................................................................................................3
PANEL DESCRIPTIONS ....................................................................................................8
DIP SWITCH.....................................................................................................................10
CONNECTION DIAGRAM................................................................................................10
EDID LEARNING..............................................................................................................11
NOTICE............................................................................................................................11
APPENDIX .......................................................................................................................12
WARRANTY.....................................................................................................................14
1
INTRODUCTION
The AV-GM0973-S1 3G/HD/SD-SDI Pattern Generator is an advanced SDI pattern generator with
multi-format (3G/HD/SD) and multi-pattern support. Besides still and moving video test patterns,
other features such as audio (SMPTE-291M) are also provided. AV-GM0973-S1 can support up to 8
channel AES compliant audio with 48KHz sample rate. Another attractive feature of AV-GM0973-S1
comes from bypassing HDMI input and allows users with more testing patterns for connected
display or treats AV-GM0973-S1 as an advanced HDMI to SDI converter with 3G capability. With
portable size, AV-GM0973-S1 is equipped four buttons and LCM screen to ease the control. This
device provides a cost effective way to calibrate and test SDI enable video devices and displays.
FEATURES
●Supported output resolution
NTSC 525@60, PAL 625@50, 720p@23.98, 720p@50,720p@59.94, 720p@60, 1080i@50,
Bit Rate: 2.97 Gbps, 2.967 Gbps, 1.485 Gbps, 1.4835 Gbps, 270 Mbps
Resolution: 10bit
●Video Patterns
100% Color Bars, Borderline, Random Noise, Check Field, Black, Vertical Lines, Black / White
alternate fields, Full Grey / Full White, Black to White Gradient, Random Generator for all still
patterns, moving squares White noise, Inverse effect with still pattern, Scrolling Title (see
Appendix for illustrations)
●Save Settings to Memory Option
●ANC Data
EDH (RP-165), SMPTE 352M, SMPTE291M
●Control
By LCM or panel buttons
●Video Output
Triple SDI output (SDI, HD-SDI, 3G-SDI)
PACKAGE CONTENTS
●1x AV-GM0973-S1
2
●1x 5V power supply unit
●1x User Manual
SPECIFICATIONS
Model Name
AV-GM0963-S1
AV-GM0973-S1
Technical
Role of usage
Pattern generator
SDI standards
HD/SD-SDI
3G/HD/SD-SDI
Auto SDI rate detection
Yes
Supported protocols
SMPTE 259M (270Mbps / 360Mpbs)
SMPTE 292M / HDTV (1.485 &
1.485/1.001Gbps)
SMPTE 259M (270Mbps / 360Mpbs)
SMPTE 292M / HDTV (1.485 &
1.485/1.001Gbps)
SMPTE 424/425M (2.97 &
2.97/1.001Gbps)
Video bandwidth
1.485Gpbs
2.97Gpbs
Data rates
143 / 270 / 1483 / 1485 Mbps
143 / 270 / 1483 / 1485 / 2967 / 2970
Mbps
Video support
[HD] 720p50/59.94/60, 1080p24/30,
1035i50/59.94/60,
1080i50/59.94/60
[3G] 1080p@50/59.94/60 (4:2:2)
[HD] 720p50/59.94/60, 1080p24/30,
1035i50/59.94/60,
1080i50/59.94/60
SDI signal type
SMPTE-292M / 259M
SMPTE-292M / 259M / 424M
HDMI bypass
Yes
Output impedance
75
Cable (Belden 1694A)
equalization /
transmission
[3G-SDI] up to 60m (190ft) / [HD-SDI] up to 150m (500ft) / [SD-SDI] up to
300m (1000ft)
Audio support
Yes
PCB Stack-up
4-layer board [impedance control —differential 100; single 50]
Input
1x HDMI
Output
2x BNC [SDI]
BNC connector
75interlocking socket
HDMI connector
Type A [19-pin female]
[HD] Eye pattern
characteristics
Amplitude: Within 800mV <10%
Rise overshoot: Less than 2%
Fall overshoot: Less than 2%
Long time jitter <1.0 UI
Timing jitter <1.0 UI
Alignment jitter <0.2 UI
Mechanical
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
150 x 190 x 32mm [5.9” x 7.5” x 1.3”]
Package
175 x 270 x 100mm [6.9” x 10.6” x 3.9”]
3
Carton
450 x 370 x 300mm [1’6” x 1’3” x 1’]
Weight
Model
660g [1.5 lbs]
Package
1260g [2.8 lbs]
Fixedness
Interlocking power supply
Power supply
5V 4A DC
Power consumption
10 Watts [max]
Operation
temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
MENU OPERATION
Menu
Items
01 Format
Resolution
NTSC
PAL
720p
1080p
1080i
Frequency
60
59.94
50
30
29.97
25
24
23.98
PsF25
PsF29.97
PsF30
Output
YCbCr 422
02 Video
Patterns
SMPTE Bar
100% Color Bar
75% Color Bar
Check Field
Gradient B→R(H)
Gradient B→G(H)
Gradient B→B(H)
Gradient R→B(H)
Gradient G→B(H)
Gradient B→B(H)
4
Gradient B→R(V)
Gradient B→G(V)
Gradient B→B(V)
Gradient R→B(V)
Gradient G→B(V)
Gradient B→B(V)
Red Level B→R
Red Level R→B
Green Level G→B
Green Level B→G
Menu
Items
02 Video
Patterns
Blue Level B→B
Blue Level B→B
Gra Level W→B
Gra Level B→W
Black Level
White Level
100% Red
100% Green
100% Blue
100% White
70% Gray
40% Gray
Black
Circle 1
Circle 2
Moire
H Stripe R
H Stripe G
H Stripe B
V Stripe R
V Stripe G
V Stripe B
Sequence
Multi-Burst
HDMI Bypass
CZP/Prog. Only
EQ
PLL
Text
Off
On-White
5
On-Black
On-Gray
Timer
Off
On-W/B
On-B/W
Data Filter
On
Off
6
Menu
Items
03 Audio
Mode
Off
On
Group
1+2
3+4
Level
0dB
-6dB
-12dB
-18dB
-24dB
-30dB
-36dB
-42dB
Silence
Random
Mask
Off
CH 1234
CH 1
CH 2
CH 3
CH 4
CH 1+2
CH 3+4
04 Motion
Motion
No Motion
Square 1
Square 2
2 Squares
Square Inv
Data Speed
1
2
3
4
5
6
7
8
05 ANC Data
SMPTE-352M
Off
On
CC
On
Off
CRC
On
Off
Line number
On
Off
06 WINDOW
PAT SET
Window
Gray
Red
Green
Blue
Cyan
Magenta
Yellow
Level
0%~100%
7
Window Field
1~20
07 System
Status
No Change
Factory
Now Save
Version
V1.05
8
PANEL DESCRIPTIONS
Front Panel
1. HDMI INPUT: Plug in a HDMI cable to be linked to a HDMI source
2. +5V DC: Connect to a 5V DC power supply unit
Rear Panel
3. SDI OUTPUT A: Connect to a SDI device for SDI, HD-SDI, or 3G-SDI signal output
either from the chosen pattern or the converted HDMI source signal
4. Lock LED: showing if the audio/video signal existed or not
5. SDI OUTPUT B: Connect to a SDI device for SDI, HD-SDI, 3G-SDI signal output either
from the chosen pattern or the converted HDMI source signal
Top View
Button
Function
Menu
Trigger the menu operation
Enter
Enter the menu item
Inhaltsverzeichnis
Andere SIIG Tragbarer Generator Handbücher
