SIIG USB 2.0 4-Port Bay Hub Bedienungsanleitung

Introducing the USB 2.0 4-Port Bay Hub

The USB 2.0 4-Port Bay Hub is designed to support USB

2.0 equipped PC computers. This USB 2.0 hub expands

USB connectivity to your computer.

FeaturesandBenefits

• Compliant with USB Specifications, Revision 2.0

• Drive bay design adds ports to the front of your

computer for convenient device connection

• Fitsintoeither3.5"or5.25"(withincludedmounting

rack) drive bay

• Provides 4 downstream ports for USB device

connections

• Supports high-speed (480Mbps), full-speed

(12Mbps), and low-speed (1.5Mbps) data transfer

modes

• Per port over-current detection and protection

• Supports simultaneous operation of multiple

high-speed USB 2.0 and USB 1.1 devices

• Hot-swappingfeatureallowsyoutoattach/detach

USB devices without powering your computer off

Note: USB 1.1 devices are limited to USB 1.1

speeds even when they are connected to a USB 2.0

host adapter or USB 2.0 hub.

USB 2.0 4-Port Bay Hub

Quick Installation Guide

04-0252B

SystemRequirements

• PC computer with one available internal USB 2.0

port

• One empty 3.5" or 5.25" drive bay

• Windows 98 SE/ME/2000/XP/Server 2003

PackageContents

• USB 2.0 4-Port Bay Hub

• (1) "Y" split power cable

• (1) USB 2.0 cable

• (1) 5.25" mounting rack

• (1) Bag assorted holding screws

• This quick installation guide

HubLayout

Important: The bay hub is shown in white in this

manual. However,itisavailableineitherblackorwhite

depending on the model purchased.

Figure 1. Hub layout

Downstream Ports

Upstream Port

(Root Port)

Power

Connector

5.25"MountingRackAssembly

Important: Use the Mounting Rack Assembly only

when installing the hub into a 5.25" drive bay.

Figure 2. 5.25" Mounting Rack Assembly

USBCableConnectors

Figure 3. USB Cable Connectors

TypeA connector TypeB connector

Installing the USB 2.0 4-Port Bay Hub

Important: In order for the USB 2.0 4-Port Bay Hub to

work properly, the driver of your existing USB 2.0 host

adapter has to have support for USB 2.0 hubs.

1. Turn OFF the power to your computer and all

connected peripheral devices.

2. Unplug the power cord from the back of the

computer.

3. Remove the computer’s cover.

4. Select an available 3.5" or 5.25" drive bay for the

USB 2.0 4-Port Bay Hub, remove the cover plate

from the selected drive bay.

Note: When installing the USB 2.0 4-Port Bay Hub

into a 5.25" drive bay install the hub into the 5.25"

mountingrack beforemounting intothe drivebay

and follow the same assembly instructions. Refer

to 5.25" Mounting Rack Assembly on page 3.

5. Use the included "Y" split power cable and plug in

the mini power connector (same type of power

connectorused forthe floppy drive)to theUSB2.0

4-Port Bay Hub's power connector.

Figure 4. Connecting the Power Connector Cable

6. ConnecttheTypeBconnectorofUSBcableintothe

upstream port (root port) of the USB 2.0 4-Port Bay

Hub.

Figure 5. Connecting the USB 2.0 Cable

7. Carefully thread the two cables through the drive

bay opening then push the hub assembly into the

drive bay. Align the hub's screw holes with the

appropriate holes in the drive bay, then carefully

attach the hub to the case using the included

mountingscrews. Becarefulnottoovertightenthe

mounting screws.

Mounting

Screw

Figure 6. Mounting the Hub Assembly

8. Connect the Type A connector of the USB cable to

the internal USB 2.0 port in your system.

USB 2.0 Port

Figure 7. Internal USB connection

9. Connectthepowerconnectorofthe"Y"splitpower

cable to the system power supply.

10. Replace the computer's cover and reconnect the

power cord, then turn the system on.

11. When Windows boots up, the USB 2.0 4-Port Bay

Hub automatically gets detected and installed.

The hub is now ready for device connection.

12. Connect the Type A connector of your USB

device(s) into any of the downstream ports on the

USB 2.0 4-Port Bay Hub.

Technical Support

QUESTIONS? SIIG’s Online Support has the answers!

Simply visit our Web site at www.siig.com and click on

Support. Our online support database is updated daily

with new drivers and solutions. The answers to your

problems could be just a few clicks away.

If you can't find answers or solutions to your questions, you

have an option to submit the problems online to one of our

technical support analysts and we will promptly respond

to you with answers or solutions.

The 5-year manufacturer warranty supplied with this

product is offered by SIIG, Inc. If you should happen to

encounter any problems with this product, please follow

the procedures below.

1. If it is within the store's return policy period, please

return the product to the store where you purchased

from.

2. If your purchase has passed the store's return policy

period, please contact SIIG. See SIIG's Limited 5-year

Warranty card for more information.

Online Store

SIIGoffersallofourproductsonlineatourcompany

store. Visit us at http://onlinestore.siig.com to find

ourcompletelineofproducts,includinghardtofind

items and accessories (power adapters, cables,

upgrade kits, etc.).

USB2.04-PortBayHubisatrademarkofSIIG,Inc.

SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are

registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel

Corporation. Othernamesused in publicationareforidentification only andmaybe trademarks

oftheirrespectivecompanies.

PRODUCT NAME

USB 2.0 4-Port Bay Hub

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B

OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCCCOMPLIANCESTATEMENT:

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undes-

ired operation.

THE PARTY RESPONSIBLE FOR

PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Ave.

Fremont, CA 94538-3152

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading computer upgrade

manufacturer of I/O connectivity products, including PCI & ISA

serialand parallelports,USB,SerialATA &UltraATAcontrollers,

FireWire(1394a/b),Networking,SoundCards,andotheraccessories.

SIIGisthepremierone-stopsourceofupgrades.

SIIGproductsoffercomprehensiveusermanuals,manyuser-friendly

features, and all products are backed by a 5-year manufacturer

warranty. High-qualitycontrolstandardsareevidentbytheoverall

easeofinstallationandcompatibilityofourproducts,aswellasone

ofthelowestdefectivereturnratesintheindustry. SIIGproductscan

befoundinmostcomputerretailstores,mailordercatalogs,ande-

commercesitesintheAmericasandtheUK,aswellasthroughmajor

distributors,systemintegrators,andVARs.

Inhaltsverzeichnis

Andere SIIG Schalten Handbücher

SIIG

SIIG JU-SW2212-S1 Bedienungsanleitung

SIIG

SIIG CE-KV0612-S1 Produktinformationsblatt

SIIG

SIIG AV-GM04P3-S1-W Bedienungsanleitung

SIIG

SIIG CE-KV0011-S1 Bedienungsanleitung

SIIG

SIIG AV-GM09V3-S1E Bedienungsanleitung

SIIG

SIIG CE-000012-S1 Bedienungsanleitung

SIIG

SIIG USB 2.0 Switch Bedienungsanleitung

SIIG

SIIG JU-SC0211-S1 Bedienungsanleitung

SIIG

SIIG CE-H22S11-S1 Produktinformationsblatt

SIIG

SIIG JU-H42B22-S2 Bedienungsanleitung

SIIG

SIIG USB 3.0 Bedienungsanleitung

SIIG

SIIG CE-CM0011-S1 Bedienungsanleitung

SIIG

SIIG 2x1 VGA Switch Bedienungsanleitung

SIIG

SIIG FireWire Bedienungsanleitung

SIIG

SIIG AV-GM09G3-S1 Bedienungsanleitung

SIIG

SIIG 2x1 USB DisplayPort KVM Switch with Remote... Bedienungsanleitung

SIIG

SIIG CE-H21112-S1 Bedienungsanleitung

SIIG

SIIG JU-SW4112 Bedienungsanleitung

SIIG

SIIG USB 2.0 SlimHub 4000P Bedienungsanleitung

SIIG

SIIG PC Switch 6000 Bedienungsanleitung

SIIG

SIIG DisplayPort 2-Port KVM Switch Bedienungsanleitung

SIIG

SIIG US22 Series Bedienungsanleitung

SIIG

SIIG AV-GM09G3-S1 Bedienungsanleitung

SIIG

SIIG CE-H23012-S1 Produktinformationsblatt

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch