SIIG AV-GM09V3-S1E Bedienungsanleitung

8x1 VGA/Component/S-Video/Composite

Switch with Audio & Ethernet Control

P/N:

Safety and Notice

The AV-GM09V3-S1E 8x1 VGA/Component/S-Video/Composite Switch with Audio & Ethernet

Control has been tested for conformance to safety regulations and requirements, and has

been certified for international use. However, like all electronic equipments, the

AV-GM09V3-S1E should be used with care. Please read and follow the safety instructions to

protect yourself from possible injury and to minimize the risk of damage to the unit.

●Follow all instructions and warnings marked on this unit.

●Do not attempt to service this unit yourself, except where explained in this manual.

●Provide proper ventilation and air circulation and do not use near water.

●Keep objects that might damage the device and assure that the placement of this unit is on a

stable surface.

●Use only the power adapter and power cords and connection cables designed for this unit.

●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the

device before cleaning.

TABLE OF CONTENTS

INTRODUCTION.................................................................................................................1

FEATURES.........................................................................................................................1

PACKAGE CONTENTS......................................................................................................1

SPECIFICATIONS..............................................................................................................2

PANEL DESCRIPTIONS.....................................................................................................3

CHANNEL CONTROL ........................................................................................................4

HARDWARE INSTALLATION.............................................................................................8

CONNECTION DIAGRAM ..................................................................................................8

PIN DEFINITION.................................................................................................................9

WARRANTY .....................................................................................................................10

INTRODUCTION

The AV-GM09V3-S1E 8x1 VGA/Component/S-Video/Composite Switch with Audio & Ethernet

Control receives and amplifies up to 8 VGA inputs, perfectly switches the desired input to the VGA

equipped monitor or receiver. The switch supports VGA video up to 350MHz. The re-transmitted

video quality is guaranteed and the longest transmission is up to 65m (210ft). Therefore,

AV-GM09V3-S1E offers the most convenient and cost effective means for swift switch of high quality

PC graphics and HDTV videos with crystal clear audio in the market. With equipped audio switch,

AV-GM09V3-S1E is ready to be as a switch with stereo audio and ideally for boardroom, showroom,

and exhibition. The control of AV-GM09V3-S1E is versatile and easier through the IR remote control,

the push button on front panel, Ethernet control, or the RS-232 control on rear panel.

FEATURES

●VGA/component/S-video/composite switch with 350MHz bandwidth

●Up to 8 graphics/video inputs

●LED indication

●Ethernet accessible

●Automatic detection of the VGA/component input

●Amplified video output with transmission length up to 65m (210-ft)

●Multiple control by IR remote, push button, Ethernet, and RS-232 control

●1U rack mountable

PACKAGE CONTENTS

●1x AV-GM09V3-S1E

●1x DC 5V 4A in-line with C7 power cord

●1x IR Remote control

●1x Rack-mounting ear set

●1x Installation software CD

●1x User Manual

SPECIFICATIONS

Model Name

AV-GM09V3-S1E

Technical

Role of usage

8x1 switch

Supported

input/output

VGA / Component / S-video / Composite*

Video bandwidth

350MHz

Video support

1080p60, WUXGA [1920x1200@60] & UXGA [1600x1200@60] or even

higher

Transmission

UXGA [1600x1200] –65m [210ft]

Audio support

Analog stereo

Input

8x VGA [component/s-video/composite through adapters]

8x 3.5mm analog stereo audio

1x RS-232

Output

1x VGA [component / s-video / composite through adapters]

1x 3.5mm analog stereo audio

VGA connector

HD-15 [15-pin D-sub female]

RS-232 connector

DE-9 [9-pin D-sub female]

3.5mm connector

Earphone jack for analog stereo audio

RJ-45 connector

WE/SS 8P8C

Input selection

IR remote / push button / RS-232 control / Ethernet

IR remote control

Electro-optical characteristics: = 25° / Carrier frequency: 36-40kHz

Mechanical

Dimensions

[L x W x H]

Model

1RU –440 x 66 x 44mm [1'5.3" x 2.6" x 1.7"]

Package

510 x 230 x 70mm [1'8" x 9.1" x 2.8"]

Carton

510 x 410 x 252mm [1'8" x 1'4" x 10"]

Weight

Model

1100g [2.4 lbs]

Package

1890g [4. 2lbs]

Fixedness

1RU rack-mount with ears

Power supply

5V 4A DC

Power consumption

13 Watt [max]

Operation temperature

0~40°C [32~104°F]

Storage temperature

-20~60°C [-4~140°F]

Relative humidity

20~90% RH [no condensation]

PANEL DESCRIPTIONS

Front Panel

1.Infrared sensor

2.LED indicator for power

3.LED indicator for VGA input #1 ~ #8

Rear Panel

4.3.5mm audio socket for audio source #1 ~ #8

5.3.5mm audio socket for selected audio output

6.VGA input source #1 ~ #8

7.Selected VGA output

8.Etherent Control

9.RS-232 control port

10.5V DC power jack

* Component and composite input/output can be done by using the optional accessory

VGA-to-Component adapter to connect to the VGA socket. However, for S-Video

input/output, please find a VGA-to-S-video adapter available in the market to fulfill you need.

CHANNEL CONTROL

IR remote cotrol

Key

Code

Function

0x03

Turn on/off AV-GM09V3-S1E

0x02

Switch from the selected input to the next

input channel

0x01

Switch from the selected input back to the

prior input channel

0x04

Select INPUT 1 to be the input source

0x05

Select INPUT 2 to be the input source

0x06

Select INPUT 3 to be the input source

0x07

Select INPUT 4 to be the input source

0x08

Select INPUT 5 to be the input source

0x09

Select INPUT 6 to be the input source

0x0a

Select INPUT 7 to be the input source

0x1b

Select INPUT 8 to be the input source

0x1f

Reserved

0x0c

Turn on/off AUTO DETECT which allows

the input source can be automatically

changed once the selected input is

disconnected

0x0d

Reserved

0x0e

Reserved

Software Control via the RS-232 or Ethernet port

Scan Device

Automatically scan the COM port connected to AV-GM09V3-S1E

String table

Freely setting the name of the inputs

AUTO DETECT function is used for checking input signal existed or not. Enable this

function will make the output port switching to the next available input in sequential

order when the currently selected input signal is lost. Disable this function will make the

AV-GM09V3-S1E stay at the currently selected input even if the input signal is lost.

Ethernet Setting

Ethernet

Users have to define Ethernet properties through RS-232 for the matrix. All the

parameters for Ethernet have to be saved into the Switcher by clicking on “Write To

Device” button.

Communication

Users can choose the control interface between Switcher and PC host.

1. Please notice that Ethernet control has a higher priority than RS-232. If RS-232 and

Ethernet controls come from 2 different hosts, commands may coincide and in this case,

commands from Ethernet will be effective immediately no matter whether commands

from RS-232 are accurately sent and executed!

2. Initial or any change to Ethernet settings, users MUST power cycle VGA matrix in order

to get the network settings effective!

HARDWARE INSTALLATION

1. Connect VGA/component/s-video/composite display/projector to the output of AV-GM09V3-S1E.

2. Connect the VGA/component/s-video/composite source devices to the inputs of

AV-GM09V3-S1E.

3. Plug power adapter cable into 5V DC power jack.

4. Use IR remote or push button on the front panel to switch between inputs, or connect a

computer through RS-232 port to switch the VGA/component/s-video/composite input sources.

CONNECTION DIAGRAM

Inhaltsverzeichnis

Andere SIIG Schalten Handbücher

SIIG

SIIG SlimHub 4000P Bedienungsanleitung

SIIG

SIIG DisplayPort 2-Port KVM Switch Bedienungsanleitung

SIIG

SIIG US22 Series Bedienungsanleitung

SIIG

SIIG CE-H24H11-S1 Bedienungsanleitung

SIIG

SIIG AV-GM09G3-S1 Bedienungsanleitung

SIIG

SIIG JU-SW2212-S1 Bedienungsanleitung

SIIG

SIIG CE-H23012-S1 Produktinformationsblatt

SIIG

SIIG USB 3.0 Bedienungsanleitung

SIIG

SIIG AV-GM04P3-S1-W Bedienungsanleitung

SIIG

SIIG 4000-MT Bedienungsanleitung

SIIG

SIIG USB 3.0 Bedienungsanleitung

SIIG

SIIG AV-GM09S3-S1 Bedienungsanleitung

SIIG

SIIG US22 Series Bedienungsanleitung

SIIG

SIIG CE-000012-S1 Bedienungsanleitung

SIIG

SIIG CE-KV0612-S1 Produktinformationsblatt

SIIG

SIIG JU-SW4112 Bedienungsanleitung

SIIG

SIIG MultiView CE-H26311-S1 Bedienungsanleitung

SIIG

SIIG USB 2.0 Switch Bedienungsanleitung

SIIG

SIIG 2x1 VGA Switch Bedienungsanleitung

SIIG

SIIG USB 2.0 4-Port Bay Hub Bedienungsanleitung

SIIG

SIIG Hi-Speed USB 4-Port Bay Hub Bedienungsanleitung

SIIG

SIIG CE-H21112-S1 Bedienungsanleitung

SIIG

SIIG JU-SC0111-S1 Bedienungsanleitung

SIIG

SIIG 1394 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung