Silencer 75SL Bedienungsanleitung

UM_FULL_75SL_REV_A 2

Contents

CHANGING THE BATTERY..............................................................................................................................................4

STANDARD LCD ICON CONFIGURATIONS ...................................................................................................................5

REMOTE TRANSMITTER OPERATION...........................................................................................................................6

LCD TRANSCEIVER BUTTON CONTROL...................................................................................................................... 7

Vehicle’s Status Check...................................................................................................................................................7

Temperature Check .......................................................................................................................................................7

Second Vehicle Security Operation................................................................................................................................7

Voltage Check ................................................................................................................................................................7

Melody / Vibration Mode.................................................................................................................................................7

Power Saver Mode.........................................................................................................................................................7

Button Lock Mode...........................................................................................................................................................7

CHIRP INDICATORS.........................................................................................................................................................8

PARKING LIGHT ...............................................................................................................................................................8

TABLE OF ZONE / ALARM DIAGNOTICS........................................................................................................................8

ALARM OPERATING CONDITION ...................................................................................................................................8

ACTIVE ARMING – LOCK & ARM ....................................................................................................................................8

Defective Sensor Reminder ...........................................................................................................................................8

Silent Arming ..................................................................................................................................................................9

Shock Sensor Bypass ...................................................................................................................................................9

Tilt Sensor Bypass..........................................................................................................................................................9

All Sensor Bypass...........................................................................................................................................................9

Hidden Alarm Function ...................................................................................................................................................9

PASSIVE ARMING ............................................................................................................................................................9

Passive Arming With Passive Door Locking...................................................................................................................9

Passive Arming By-Pass ................................................................................................................................................9

ACTIVE DISARMING – UNLOCK & DISARM...................................................................................................................9

Silent Disarming ...........................................................................................................................................................10

Tamper Disarming ........................................................................................................................................................10

Pathway Illumination.....................................................................................................................................................10

Two-Steps Door Unlock................................................................................................................................................10

Automatic Re-Arm ........................................................................................................................................................10

TRIGGER THE SYSTEM ................................................................................................................................................10

Noise Abatement Circuit ..............................................................................................................................................10

PANIC FUNCTION ..........................................................................................................................................................10

DISARMING WITHOUT A TRANSMITTER..................................................................................................................... 11

VALET MODE.................................................................................................................................................................. 11

Enter Valet Mode .......................................................................................................................................................... 11

Exit Valet Mode............................................................................................................................................................. 11

Remote Valet ................................................................................................................................................................ 11

CAR LOCATOR............................................................................................................................................................... 11

DRIVER PAGING / LOST & FOUND............................................................................................................................... 11

DOME LIGHT CONVENIENCE SUPERVISION ............................................................................................................. 11

IGNITION CONTROL DOOR LOCK/UNLOCK ...............................................................................................................12

TRUNK RELEASE (AUX 1) OUTPUT ............................................................................................................................12

AUX 2 TIMER CONTROL OUTPUT ...............................................................................................................................12

AUX 3 TIMER CONTROL OUTPUT................................................................................................................................12

AUX 4 TIMER CONTROL OUTPUT................................................................................................................................13

SECOND CAR OPREATION...........................................................................................................................................13

POWER ON MEMORY ...................................................................................................................................................13

STOP THE TRIGGER MELODY SOUND .......................................................................................................................13

CLEAR THE FLASHING TAMPER WARNING MESSAGE ICONS ................................................................................13

ILLUMINATE LCD DISPLAY............................................................................................................................................13

OUT OF RANGE ............................................................................................................................................................13

UM_FULL_75SL_REV_A 3

REMOTE START OPERATION

TO REMOTE START THE VEHICLE...........................................................................................................................14

PROGRAMMABLE SAFETY START ..........................................................................................................................14

RUNNING TIME EXTENDER.......................................................................................................................................15

OPERATE THE VEHICLE WHILE RUNNING FROM THE REMOTE START ...............................................................15

TEMPORARY STOP MODE ........................................................................................................................................15

TO TURN OFF THE REMOTE START........................................................................................................................15

DISABLING THE REMOTE START SYSTEM.............................................................................................................15

TIMER START OPERATION .......................................................................................................................................16

24 hour repeat with cold starting ..............................................................................................................................16

Activate Timer start on / off.......................................................................................................................................16

DAILY TIMER START..................................................................................................................................................16

Activate Daily timer start on / off...............................................................................................................................16

TURBO TIMER MODE ................................................................................................................................................16

To activate Turbo Timer Mode ..................................................................................................................................17

Cancelling Turbo Timer Mode...................................................................................................................................17

MANUAL TRANSMISSION REMOTE START FUNCTION (Reservation Mode) ........................................................17

Activating Reservation Mode....................................................................................................................................17

Cancelling Reservation Mode...................................................................................................................................18

SHUTDOWN / STARTUP DIAGNOSTICS ..................................................................................................................18

Group 1 / Group 2 ................................................................................................................................................... 18

Group 3.....................................................................................................................................................................19

LCD REMOTE CONTROL PROGRAM SETTING ......................................................................................................19

SILENCER LIMITED LIFETIME WARRANTY.............................................................................................................20

UM_FULL_75SL_REV_A 4

LCD REMOTE CONTROL TRANSCEIVER:

A. CHANGING THE BATTERY

BATTERY REPLACEMENT: SLRF752

The Two-Way remote transmitter is powered by one “AAA” Battery. When the power of the battery weakens the

icon shall be displayed on the LCD screen. When the old battery is replaced, there will be beep sounds to indicate

the power is back up on the transmitter.

BATTERY REPLACEMENT: SLRF751

The One-way remote is powered by one CR2032 Battery. To replace the battery, use a coin or

small at blade screwdriver to carefully pry apart case

Small Flat Blade

Screwdriver or Coin

UM_FULL_75SL_REV_A 5

B. STANDARD LCD ICON CONFIGURATION:

The lock icon will be displayed when

the doors are locked.

The unlock icon will be displayed when

the doors are unlocked.

Hidden Alarm Mode

The security system is armed with ahidden

alarm function (silent alarm)

Valet Mode

All alarm and remote start functions

shall be temporally off.

Door Trigger (Zone 1)

Door is illegally opened Door Ajar

Trunk Trigger (Zone 2)

Trunk is illegally opened

Trunk Ajar or

Trunk Release

Hood Trigger (Zone 3)

Hood is illegally opened. Hood Ajar

Shock Sensor Trigger (Zone 5)

No Icon = Shock Sensor Bypass

With Icon = With Shock Sensor

Icon Flashing = Shock Sensor trigger

Tilt Sensor Trigger (Zone 6)

No Icon = Tilt Sensor Bypass

With Icon = With Tilt Sensor

Icon Flashing = Tilt Sensor trigger

Ignition Trigger (Zone 4)

(Icon ash) Ignition switch was illegally

turned on.

System Trigger or Panic mode

Engine Cranking

Your vehicle engine is cranking by remote

control.

Engine Running

Your vehicle’s engine is running

Timer Control Start

Engine starts automatically every

2 or 3 hours

Display the set up Running time inter-

val 2 / 3 / 24 Hours

Temperature Control Start

Engine will start at a specied temperature Display the set up start temperature

Manual Transmission Mode 22nd Car Operation

Driver Paging

Someone is paging you from of your vehi-

cle.

Button Lock (Icon on)

Remote Transmission

You are transmitting the signal to control

unit.

In – Range Indicator

You are within the range of the remote

control.

Low Battery Power Save

Reduces battery consumption

Melody Mode Vibration Mode

Alarm Clock Parking Meter

Reminder when time is up for parking

UM_FULL_75SL_REV_A 6

C. REMOTE TRANSMITTER OPERATION:

Transmitter

Button System Function Remark

Arm & Lock Doors Press the Lock button for a half second

Silent Arm & Lock Doors Press and hold for 1.0 seconds

Panic Function Press and hold for 3 seconds to Activate or

Deactivate panic function

Car Locator Press when in Armed Mode

- Arm and Delete the

2 Stage Shock Sensor Press Twice within 3 seconds.

- Arm and Delete the

Tilt Sensor Press the button rst then Press button

- - Arm and Delete the

2 Stage Shock & Tilt Sensor

Press Twice then Press button within

3 seconds.

- Arm with Hidden Alarm Function Press the button rst then Press button

Disarm & Unlock Doors Press the Unlock button for a half second

Silent Disarm & Unlock Doors Press and hold for 1.0 seconds

- Disarm & Two Steps Door Unlock (optional) Press twice within 3 seconds

1.0sec. - Silent Disarm & Two Steps Door Unlock Press and hold the button for 1.0 seconds rst

then press button.

Trunk Release (Aux 1) Press and hold for 3 seconds

- Passive Arming By-Pass While the system is disarmed

Activate or Deactivate the Remote Start Press button once.

- Press twice if set to start safety mode.

Running Time Extender Press and hold for 2 seconds

- Timer Start Press the button rst then tap Press button.

+ Turbo Mode Press together & release.

+ Aux 2 Timer Output Press together & release.

+ Aux 3 Timer Output Press together & release.

+ Aux 4 Timer Output Press together & release

+ Switch Code for 2nd Car Operation Press together & release.

+Shutdown Diagnostic Press together & release

Level Setting. Press F button once.

Light up LCD indicator & Function Setting Press and hold for 1.0 seconds

LCD Remote Program Setting Press and hold for 3.0 seconds

UM_FULL_75SL_REV_A 7

D. LCD TRANSCEIVER REMOTE CONTROL:

1. Press the Fbuttons the number of times corresponding to the Level you wish to select;

the LCD will display LEVEL number ( )

2. Press the button while LEVEL number text is still on to perform the command.

Button Direct Access Fx 1 Level 1 Fx 2 Level 2 Fx 3 Level 3

Arm & Lock Arm & Bypass the Shock

Sensor

Arm & Bypass the

Tilt Sensor Hidden Alarm

1 sec. Silent Arming Vehicle’s

Status Check Temperature Check

Disarm & Unlock or

Silent Disarming Remote Valet ON / OFF Car 1 / Car 2 operation Voltage Check

Trunk Release

(Aux 1) Aux 2 Aux 3 Aux 4

Remote Start or Running

Time Extender Timer Start ON / OFF Daily Timer Start

ON / OFF

F 1 sec Melody /

Vibration Mode

Power Save Mode

ON / OFF

Button Lock

ON / OFF

Vehicle’s Status Check: Press Fbutton rst then press and hold buttons for 1 second. The LCD remote transceiver

will display the current status of the vehicle.

Temperature Check: Press Fbutton 2 times rst then press and hold buttons for 1 second. The LCD remote

transceiver will display the current Temperature of the vehicle.

Second Vehicle Security Operation: Press Fbutton 2 times rst then press buttons to enter Second Vehicle Security

Mode, Under this mode press button to select CAR 2 operation, The 2icon and display on the LCD screen or

CAR 1 operation and the 2icon will disappear and display on the LCD screen.

Voltage Check: Press Fbutton 3 times rst then press button. The LCD remote transceiver will display the

voltage condition of the vehicle.

Melody / Vibration Mode: Press F button rst then press and hold F buttons for 1 seconds until the beep conrms,

then release the button to enter Tone / Vibrating Mode, Under this mode press and hold Fbutton for 1 seconds to select

Melody Mode ( icon will display) or Vibration Mode ( icon will display) or both ( and icon will display).

Power Saver Mode: Press Fbutton 2 times rst then press and hold F buttons for 1 seconds until the beep conrms

to enter Power Saver Mode, Under this mode press and hold Fbutton for 1 seconds until the beep conrms, then release

the button to enable (The SAVE icon will display) or disable Power Save Mode(The SAVE icon will disappear). While in

Power Save Mode the LCD transmitter will not look for any incoming signals from the main unit until a button is pressed.

Button Lock Mode: Press Fbutton 3 times rst then press and hold Fbuttons for 1seconds until the beep conrms,

then release the button to enter Button Lock Mode, Under this mode press and hold Fbutton for 1 second to enable

(icon will display) or disable Button Lock Mode (The icon will disappear)., the remote control will beep/vibrate

2 times when a button is pressed indicating it is locked.

EXIT: Wait 10 seconds, or press the other buttons to leave the setting except the Fbutton.

UM_FULL_75SL_REV_A 8

E. CHIRP INDICATORS PARKING LIGHT

Chirp Function

Parking light Function

1 Chirp Arm 1 Flash Arm

2 Chirps Disarm 2 Flashes Disarm

3 Chirps Defective Reminder 3 Flashes Disarm / Triggered Warning

4 Chirps Disarm / Triggered Warning 12 Flashes Car Locator

6 Chirps Car Locator Constant On Under Remote Start

TABLE OF ZONE / ALARM DIAGNOTICS

Situation Situation LED On Duty

Zone 1 (Door Triggered) 1 ashes, break, then repeat

Zone 2 (Trunk Triggered) 2 ashes, break, then repeat

Zone 3 (Hood Triggered) 3 ashes, break, then repeat

Zone 4 (Ignition Triggered) 4 ashes, break, then repeat

Zone 5 (Shock Triggered) 5 ashes, break, then repeat

Zone 6 (tilt Triggered) 6 ashes, break, then repeat

ALARM OPERATING CONDITION

LED On Duty Siren / Horn Parking Light LED Doors Starter Dome Light

Arming 1 or 3 Chirps 1 Flash Slow

Flash Locking Disable

Disarming 2 or 4 Chirps 2 or 3 Flash-

es OFF Unlocking Turns on for

30-Seconds

Trigger Alarming Flashes Flashes

Pause Disable Flashes

Hidden Alarm Flashes Slow

Flash Disable Flashes

30 Sec. Passive Arming Fast

Flash

Panic Alarming Flashes Flashes

Car Locator 6 Chirps 12 Flashes Locking

F. ACTIVE ARMING – LOCK & ARM

1. Press the button on the transmitter.

2. The alarm arms, doors lock (if connected), and the siren chirps and parking lights ash once indicating that the

security system is now armed. The icon and beeps play to conrm. If Valet Mode* is ON, the doors lock and

the +icon and tone play on the LCD transceiver. Exit Valet Mode to arm the alarm normally.

DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps and the defective / / icon

will display on the LCD screen, then then you have left a door, trunk, or hood lid ajar and the defective icon

will display onthe LCD screen.

UM_FULL_75SL_REV_A 9

SILENT ARMING: Press and hold the transmitter buttons for 1.0 second. This will arm your security system

without a chirp. Arm conrmation will be through the vehicles parking lights only.

SHOCK SENSOR BY-PASS: Press the button two times within 5 seconds will arm the security system and bypass

warn-away and shock sensor and the shock sensor icon will disappear on the LCD screen.

Note: The bypass feature is programmed to activate for one arming cycle only. The security system will return to

normal operation during the next arming cycle.

TILT SENSOR BY-PASS: Press the button rst then press button within 3 seconds will arm the security system

and by-pass the tilt sensor and the tilt sensor icon will disappear on the LCD screen.

ALL SENSOR BYPASS: Press button 2 times then release the button and press button. It will arm the security

system and bypass all sensors, the icon and icon will all disappear on the LCD screen.

HIDDEN ALARM FUNCTION: The security system will arm and with “Hidden Alarm Function”, the siren / horn will be

silenced even if the sensor is triggered in the armed mode. Alarm indication will only appear on the LCD Transmitter.

 Press the button rst. Within 3 seconds press the button to will Arm the security system and activate the

hidden alarm function and the hidden alarm icon will show on the LCD screen.

G. PASSIVE ARMING:

Active arming / disarming is controlled by your security system via the remote transmitter.This security system is

equipped with an optional Passive Arming feature which allows the security system to arm 30 seconds after the last

door is closed. Operation is as follows:

1. Turn the ignition to the “OFF” position and exit the vehicle.

2. After all entrances are closed, the security system LED will ash fast for 30 seconds. If you reopen any door / hood

/ trunk, the security system LED will stop ashing. It will begin ashing again once all vehicle entrances are closed.

3. After the 30-second time has elapsed, the security system will automatically “ARM”. The icons and beeps

play to conrm. The siren will chirp [1] time and the parking lights will ash [1] time.

PASSIVE ARMING WITH PASSIVE DOOR LOCKING: The vehicle doors will automatically lock after the passive

arming cycle has been completed.

PASSIVE ARMING BY-PASS: While the system is disarmed, press the button twice. The system will respond

with [1] chirp and LED will turn “Off”. The security system will remain in this temporary state for as long as you wish.

To exit Passive arming by-pass, press the transmitter or button and the system will return to normal status.

H. ACTIVE DISARMING – UNLOCK & DISARM

1. Press the button on the transmitter.

2. The siren will chirp twice and the parking lights will ash twice indicating that the security system is now disarmed.

The icon and beeps play to conrm. If Valet Mode* is ON, the doors unlock and the +icon and tone

play on the LCD transceiver. Exit Valet Mode to arm the alarm normally.

3. The vehicle’s doors will unlock and the dome light will turn on for 30 seconds upon disarming.

(Note: Power door locks and dome light must be installed with the security system.)

SILENT DISARMING: Press and hold the transmitter buttons for 1.0 second. This will disarm your security system.

No chirp sound will be heard and the disarm conrmation will be through the vehicles parking lights only,

UM_FULL_75SL_REV_A 10

TAMPER DISARMING: If the alarm has been triggered, upon disarm the system’s siren will chirp 4 times and the

parking lights will ash 3 times telling you the alarm has been triggered during the last armed state and the triggered

Icon will display on the LCD screen.

PATHWAY ILLUMINATION: When receiving an unlock /disarm signal, this feature will turn the parking lights

“ON” for 30 seconds and for 10 seconds upon the lock signal.

TWO-STEPS DOOR UNLOCK (Optional): This feature will independently unlock the driver’s door only

when disarming the security system.

• Pushing the button a second time within 3 seconds will disarm the security system and unlock the other doors.

• Press and hold the button for 1.0 seconds, within 3 seconds presses the button will Silent Disarm the

security system and unlock the other doors.

AUTOMATIC RE-ARM: If this feature is selected, the security system will automatically re-arm itself in

60 seconds after disarming with remote transmitter. Automatic rearm will cancel if any door is opened

before the 60 seconds timer has elapsed.

I. TRIGGER THE SYSTEM:

When armed, your vehicle is protected as follows:

Light impact will trigger the warn-away signal. Heavy impacts / Doors open / Trunk open / Hood

open / Turn on the ignition key / lift the vehicle will trigger the programmed sequence and the trigger

icon will ash the icon and trigger zone fault report will display on the LCD screen. The starter disable relay

(if installed) prevents the vehicle’s starter from cranking. The siren, horn, parking lights, and dome light will turn on for

30 seconds, alerting of an intrusion. It will then stop, automatic reset and re-arm. If any one of the sensors or detectors

is still active, the alarm system will sound a maximum of 3 times. Each time is a 30 second cycle.

NOISE ABATEMENT CIRCUIT: Your system has a “Noise Abatement Circuit”. It prevents annoying repetitive trigger

sequences due to faulty door pin switches or environmental conditions such as thunder, jackhammers airport noise, etc.

Here’s how “Noise Abatement Circuit” works: The alarm triggers ve times. Each time, It’s all shock sensor triggers

the alarm; the “Noise Abatement Circuit” will interpret this pattern of triggers as a false alarm. After the fth trigger,

the “Noise Abatement Circuit” ignores, or bypasses the shock sensor until a different sensor or switch is triggered.

“Noise Abatement Circuit” covers doors (Trunk / Hood / Tilt Sensor / Ignition Switch) differently: If the alarm is

triggered by an open door for three full cycles, the doors will be bypassed until the trigger ceases.

J. PANIC FUNCTION:

Press and hold the button for 3 seconds until the beep conrms and then release the button to activate the

personal protection alarm and the icon will display on the LCD screen. During panic mode, the normal function of

the transmitter buttons will be suspended. The transmitter and buttons can be used to lock and unlock the door

(if the option is installed). To stop the alarm, press and hold the button on the transmitter again for 3 seconds. The

system will automatically stop after 30 seconds.

Inhaltsverzeichnis

Andere Silencer Fernstartsystem Handbücher

Silencer

Silencer SL- 51 Bedienungsanleitung

Silencer

Silencer SL-51X Bedienungsanleitung

Silencer

Silencer SL-52FM Bedienungsanleitung

Silencer

Silencer 55SL Bedienungsanleitung

Silencer

Silencer 65SL Bedienungsanleitung

Silencer

Silencer 53SL Bedienungsanleitung

Silencer

Silencer 55SL Bedienungsanleitung

Silencer

Silencer SL-51X Bedienungsanleitung

Silencer

Silencer 56SL Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Code Alarm

Code Alarm CA-535 Bedienungsanleitung

Ozito

Ozito OJS-800 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Viper

Viper 4204 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch