Silva ADC Wind Bedienungsanleitung

User Manual

1.0 General Guide

Thank you for purchasing your new ADC.

We recommend reading this manual, and

practicing the operations before using your

ADC in the field.

The ADC is designed to provide you with

information essential to your needs. Data

such as temperature, wind speed, barometric

pressure, altitude and humidity are features

specific to four different ADC models: Wind,

Summit, Pro and JetSet.

Each ADC model is constructed to withstand

water submersion and is ideal for conditions

you endure during outdoor activities such as

hiking, climbing, hunting, kayaking, skiing,

and racing. Every ADC also includes current

time, daily alarm, chronograph and race

timer functions. ADCs are equipped with a

propeller and other precise sensors to

measure outdoor conditions.

WARNING !

Make sure that you fully understand the

functions and limitations of the ADC

before relying on it.

The ADC is an assisting device for the

outdoor user, and is not a substitute for

weather advisories from a weather

station. It is helpful to check the

readings provided by this product

periodically with those broadcasted by

the weather station.

2.0 Care and Maintenance

Prevent getting dirt in the ADC propeller. It

could clog the mechanism.

Avoid exposing this product to extreme heat

or extreme cold for an unreasonable amount

of time.

Avoid severe impacts to the ADC.

Store the ADC in a dry place when it is not in

use.

Clean the ADC with a soft moistened cloth

occasionally.

DO NOT expose the ADC to strong

chemicals such as gasoline and alcohol, as

they will damage this product.

3.0 Part description

Propeller

Display

1st row

2nd row

3rd row

4nd row

Detachable

Belt Clip

[mode]

Red-colored

blade

Propeller

blade

[set]

[light]

[reset]

Push Button

[mode] Button

[set] Button

Press the mode button to select among the

major function modes

In function modes: Press and hold the mode

button to select setting display

In any setting display: Press the mode button to

select among different settings. Press and

hold the mode button to exit setting sequence.

In Current Time Mode: press the set button to

select the DailyAlarm Display.

In Daily Alarm Mode: Press the set button to

switch the daily alarm between ON and OFF.

In Chronograph Mode and Race Timer Mode:

Press the set button to start or stop the

counting.

In Lap Time Recall Mode: Press the set button

to select the available lap time(s).

In setting displays: press the set button to scroll

the through the settings.

4.0 Button Operation Summary 1

Note:

The button operations are

summarized in the following

paragraphs, for detail operating

instructions, please continue

reading.

[mode]

[set]

[reset] Button

[light] Button

In Chronograph Mode (counting): Press the

reset button to get Lap Time Display.

In Chronograph Mode (stop-counting): Press

the reset button to reset the display to zero.

In Timer Mode (stop-counting): Press the

reset button to reset the timer to target time.

In Lap Time Recall Mode: Press the reset

button to select the available lap time(s).

In setting displays: press the reset button to

scroll the through the settings.

In any functional mode/display, press the light

button once to turn ON the EL backlight for

about 3 seconds.

4.1 Button Operation Summary 2

[light]

[reset]

Note:

The button operations are

summarized in the following

paragraphs, for detail operating

instructions, please continue

reading.

5.0 Major Functional Modes

Current Time ModeWind Mode

Temperature Mode

Daily Alarm Mode

Race Timer Mode

Chronograph Mode

Time Function

Major Functional Modes

Sensor Function

[set][mode]

[mode]

CHRONO

GRAPH

RACE TIMER

DAILY ALARM

0:00.00

0:10.00

12:00

THU 06-MAR

28.0 C8

12:38 28

2003

TEMP C8

18.2 13.2

18.3 8.3

28.3

WIND Km/H

21.3 ON

6.0 Current Time Mode - Functional Displays

06MAR

28.0 C

12:38.28

THU

Current Time Mode

Date

Current

Time

Day of week

Current

Temperature

2003

Year

Current Time Mode - Setting the Current Time Mode

To Select Setting Display

The Setting Sequence

Setting the current time and date, and their

display formats, press and hold the [mode]

button for about 2 seconds to select the

setting display (the '12' indicator will start

flashing).

In setting display, press the [mode] button to

move the setting following the adjacent

diagram.

When the ' ' or ' ' digits starts flash,

press the [set] or [reset] button to switch

between ' ' (12 hour format) and ' ' (24

hour format). When the ' ' digits starts

flash on the display, press [set] or [reset]

button to reset the second to zero.

If one of the settings (minute, hour, year,

month, date) starts flash, press the [set] or

[reset] button to scroll through the setting

(hold down the button to scroll the setting at

a faster pace).

When the above settings finished, press and

hold the [mode] button for about 2 seconds

to exit the setting sequence.

12 24

second

year

12/24

minute

month

date

second

hour

hold

[mode]

hold

[mode] [mode]

'12'changesto'24';

'24'changesto'12'.

resetSecondtozero

[mode]

[set]

or[reset] [set]

or[reset]

[mode]

[reset]

[set]

hold[reset]

hold[set]

Current Time Setting Sequence

Current Time Mode

scroll through

the settings by

increment

scroll

the setting at

a faster pace

scroll through

the settings by

decrement

scroll

the setting at

a faster pace

06MAR

12:38.28

THU

28.0 C888.2%

6.1

Daily Alarm Display

To Select Daily Alarm between ON and OFF

Daily Alarm Sound

In Daily Alarm Mode, the display will show

the following:

1)The mode indicator ' ' appears

on the 1st row of the display.

2)The ' ' or ' ' status indicator appears

on the 2nd row of the display.

3)The alarm time (hour and minute) appears

on the 3rd row of the display.

To select the daily alarm between ON and

OFF, press the [set] button once.

When the daily alarm is ON, the Alarm ON

Indicator ' ' appear otherwise it is OFF.

When the daily alarm is ON, the product will

beep at the predefined alarm time for about

30 seconds.

When the beep sounds, it can be stopped

prematurely by pressing any of the buttons

except the [light] button.

DAILY ALARM

ON OFF

DAILY ALARM

12:00

DAILY ALARM

-- :

OFF

Alarm ON Display

Alarm OFF Display

Daily Alarm Mode

Alarm ON/OFF

Status

Mode indicator

Alarm time

[set]

Alarm ON

Indicator

7.0 Daily Alarm Mode - Daily Alarm Display

--:--

Andere Handbücher für ADC Wind

Inhaltsverzeichnis

Sprachen:

Andere Silva Kompass Handbücher

Silva

Silva Expedition 54 Installationsanleitung

Silva

Silva Carabiner 9 Referenzhandbuch

Silva

Silva NOMAD Bedienungsanleitung

Silva

Silva EXPLORER 203 Bedienungsanleitung

Silva

Silva 515 Bedienungsanleitung

Silva

Silva 103RE Service-Handbuch

Silva

Silva Carabiner 28 Referenzhandbuch

Silva

Silva 179KR Bedienungsanleitung

Silva

Silva race Jet Bedienungsanleitung

Silva

Silva Expedition 4 Bedienungsanleitung

Silva

Silva LaserMaster Bedienungsanleitung

Silva

Silva SightMaster Bedienungsanleitung

Silva

Silva EXPEDITION SERIES Bedienungsanleitung

Silva

Silva EXPEDITION SERIES Bedienungsanleitung

Silva

Silva Explorer 203 Technisches Handbuch

Beliebte Kompass Handbücher anderer Marken

Quechua

Quechua C Quechua 400 Bedienungsanleitung

Brunton

Brunton 54lu Bedienungsanleitung

Raymarine

Raymarine ST40 Bedienungsanleitung

Advanced Navigation

Advanced Navigation GNSS Compass Bedienungsanleitung

Brunton

Brunton 85R Handbuch

Brunton

Brunton 9020G Kurzanleitung zur Einrichtung

Furuno

Furuno SC-30 Bedienungsanleitung

PNI

PNI V500 Bedienungsanleitung

Suunto

Suunto KB-14/360 Bedienungsanleitung

Conrad

Conrad 67 13 02 Bedienungsanleitung

Brunton

Brunton NOMAD V2 PRO Bedienungsanleitung

Bushnell

Bushnell Digital Navigation 70-0002 Bedienungsanleitung

Dakota Digital

Dakota Digital Odyssey ODY-17-1 Bedienungsanleitung

Brunton

Brunton 16B Braille Bedienungsanleitung

Freestyle

Freestyle TOUCH COMPASS Bedienungsanleitung

True North

True North Revolution Bedienungsanleitung

TECHTRAIL

TECHTRAIL Trailhead Bedienungsanleitung

Furuno

Furuno Sc 50 Bedienungsanleitung