Silver Cross ZEST Bedienungsanleitung
ZEST
IMPORTANT: KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE
SX Zest Instructions 2016.indd 1 08/03/2016 11:18
2
These instructions are important.
Read these instructions carefully before
use and keep them for future reference.
Your child’s safety may be aected if you
do not follow these instructions. Your Zest
pushchair is a high quality Silver Cross
product. It meets current safety standards
and care and regular light maintenance
will ensure long service. This vehicle is
intended for children from birth to 25kg.
If somebody unfamiliar is using your Zest
pushchair always ensure that they read
these instructions carefully so that they
understand how the product works best.
Always read all the instructions provided
carefully and remember, the safety of your
child is your responsibility.
WARNING: Never leave your
child unattended.
Contents
Your Zest pushchair includes the following
components, please check that you have
all the items before proceeding:
1.1 Zest Pushchair Chassis,
Seat Fabrics and Basket
1.2 Zest Hood
1.3 Zest Raincover
1.4 Zest Front Wheel Assembly x2
1.1
1.2 1.3
1.4
SX Zest Instructions 2016.indd 2 08/03/2016 11:18
3
silvercrossbaby.com
Assembling the Zest
WARNING: Check the wheel
is secure by pulling gently
downwards.
Repeat on both sides. Your Zest is now
ready to be unfolded.
2.1 Locate the locking catch on the side
of the pushchair and lift to release
from the locking stud.
2.2 Allow the pushchair to open by lifting
the handles upwards and the wheels
will naturally fall to the oor.
2.1
2.2
SX Zest Instructions 2016.indd 3 08/03/2016 11:18
4
Assembling the Zest (continued)
2.3 Finally, press down gently upon
the rear locking catch, positioned
between the rear wheels, to lock your
pushchair.
WARNING: Failure to do this
will cause damage to your
pushchair.
Place the pushchair on a at surface
and ensure that the pushchair moves
freely.
2.4 To t your Zest hood, locate the clips
on the hood. Now attach the hood
to the Zest chassis by sliding clips
over the hood connection bracket.
A positive engagement should be
ensured.
2.5 Connect the fabric of the hood
to the fabric of the seat with two
press studs, one on each side of the
pushchair.
2.6 Connect the fabric of the hood to
the rear leg of the chassis with two
press studs, one on each side of the
pushchair.
2.3
2.4
2.5 2.6
SX Zest Instructions 2016.indd 4 08/03/2016 11:18
5
silvercrossbaby.com
Assembling the Zest (continued)
2.7 Your Zest hood can be opened and
folded by pulling the hood forward
or pushing backwards on the hood
frame. Your hood can also be
extended forwards by unzipping zip
as shown in diagram 2.7. Please note
when folding your Zest pushchair
you should always ensure the hood
is folded away. Failure to do this
could result in damage to your Zest
pushchair.
2.8 Your Zest pushchair has a multi-
position calf support. Locate the
adjustment levers either side of the
calf support. Pull levers towards you
and adjust to the required position.
2.8
2.7
SX Zest Instructions 2016.indd 5 08/03/2016 11:18
6
Reclining the Zest
3.1 Your Zest pushchair has a multi-
position recline.
3.2 First, locate the backrest adjustment
mechanism at the rear of the seat.
Pull up the recline lever and gently
lower to the desired position.
3.3 To raise the backrest locate the
recline lever and pull up gently into
the desired position. The backrest will
rise to the desired height.
NOTE: The backrest should
always be in the upright
position and the hood folded
away prior to folding.
3.1
3.2
3.3
SX Zest Instructions 2016.indd 6 08/03/2016 11:18
7
silvercrossbaby.com
Using the Harness
The harness is a ve point system
consisting of shoulder straps, waist straps
and crotch strap. Before you use the
pushchair, the harness must be adjusted to
suit the size of the child.
4.1 It is very important that you make
sure the shoulder straps are the
correct height for your child. The
shoulder straps should be level or just
below your child’s shoulders.
In a safe and secure environment,
place your child in the pushchair
with the backrest upright and assess
which of the three shoulder strap
height positions is most suitable for
your child.
NOTE: Winter/Summer clothing
can make a dierence to the
size of your child.
WARNING: NEVER LEAVE YOUR
CHILD UNATTENDED DURING
THIS PROCESS. Remove your
child whilst the following
adjustments are being made.
4.1
SX Zest Instructions 2016.indd 7 08/03/2016 11:18
8
5.1 Adjusting the harness
5.1 Your Zest pushchair has a multi-
position height adjustment for the
harness. To adjust the shoulder strap
height, start by disconnecting the
shoulder clips from the waist clips.
5.2 Pass one of the shoulder clips
through the button hole on the cover
and backrest. Once the clip is fully
through to the opposite side of the
backrest, pass it back through the
desired slot. Repeat these steps for
the other shoulder clip, ensuring that
the selected button holes are in line.
5.2
SX Zest Instructions 2016.indd 8 08/03/2016 11:18
9
silvercrossbaby.com
Adjusting the harness
WARNING: Always ensure
plastic toggles on shoulder and
waist straps are securely and
correctly located into backrest.
6.1 Plastic toggles must always be
located correctly into backrest.
They do not need to be removed to
adjust harness.
6.2 If, for any reason, toggles are
removed, they can be re-located
by pushing into the hole on the
backrest, ensuring 2 prongs click into
place securely.
6.1
6.2
SX Zest Instructions 2016.indd 9 08/03/2016 11:18
10
Adjusting the harness
WARNING: Always ensure
buckle toggle is securely and
correctly located into seat.
Buckle strap must always be located
correctly into seat. It does not need
to be removed to adjust harness.
7.1 If, for any reason, the buckle strap
is removed, it can be re-located by
pushing through both the buttonhole
on seat fabric and buttonhole on
seat substructure.
7.2 Ensure the buckle strap goes through
both layers of fabrics.
7.3 Your harness is fully adjustable by
moving the sliders (A), to make
tting easy. Normally, each shoulder
strap is adjusted to the same length
as the waist straps.
‘D’ rings are provided for tting a
separate harness if required (B),
complying with BS 6684. Your child
should always be harnessed in and
should never be left unattended, even
for short periods of time.
7.1
7.2
BB
A
A
A A
7.3
SX Zest Instructions 2016.indd 10 08/03/2016 11:18
Andere Handbücher für ZEST
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Silver Cross Kinderwagen Handbücher
Silver Cross
Silver Cross Jet Bedienungsanleitung
Silver Cross
Silver Cross REEF Bedienungsanleitung
Silver Cross
Silver Cross Wayfarer Bedienungsanleitung
Silver Cross
Silver Cross Pioneer Bedienungsanleitung
Silver Cross
Silver Cross ZEST Bedienungsanleitung
Silver Cross
Silver Cross Avia Bedienungsanleitung
Silver Cross
Silver Cross POP Bedienungsanleitung
Silver Cross
Silver Cross Fizz Bedienungsanleitung
Silver Cross
Silver Cross Horizon Go Bedienungsanleitung
Silver Cross
Silver Cross Balmora Bedienungsanleitung
Silver Cross
Silver Cross Linear Chassis Bedienungsanleitung
Silver Cross
Silver Cross Coast Bedienungsanleitung
Silver Cross
Silver Cross Classic Chassis Bedienungsanleitung
Silver Cross
Silver Cross Coast Bedienungsanleitung
Silver Cross
Silver Cross Coast Bedienungsanleitung
Silver Cross
Silver Cross Marie-Chantal Sleepover Bedienungsanleitung
Silver Cross
Silver Cross Dune Bedienungsanleitung
Silver Cross
Silver Cross REFLEX Bedienungsanleitung
Silver Cross
Silver Cross Freeway Bedienungsanleitung
Silver Cross
Silver Cross Tide Bedienungsanleitung
