TABLE OF CONTENTS
1. System Description . . . . . . . . . . . . . . ; . . . . . . . . . e. . . . . .l
2. Preparation for Flight . . . . . . . . . , . . . . . . . . . w. . . . . m. . .l
3. Use of the Fueltron During Flight . . . . . . . . . . . . . . . . . O. .4
4. Programming the Fueltron for Full Fuel Quantity I. . . a. q.7
5. Maintenance . . . . . *. . . . . . . , . . D. . . . . . . . . . . s. . . . . . .7
6. Notes of Caution . . . . . . . . . . . . . . . . . -. I.. . . . . . .I.‘. . . e.8 +
Upper display shows Fuel Re-
Selects display of Fuel Re-
maining. Fuel Burned, or Time
Remaming.
maining, Fuel Burned, or Time
Remaining. as selected by ad-
jacent switch. Also used as a
counter when you are entering
starting fuel data. I
Used in entering data
on fuel status. _
Selects bright display for day-
time use. dim for night. TEST
position verifies proper opera-
tion of the display digits
Fueltrons get their basic data
from the digital output of a
flow transducer in the fuel tine
to each engine. Tlus output,
which is directly proportional
to fuel flow, is combined in
the Fueltron with precise time
#data from a quartz crystal
clock and shown on the FUEL
FLOW displays.
Used in setting and storing
,amounts of added fuel before
entering.
Lights up when master switch
of aircraft is turned on. Indi-
cates that the computer is in
the programmmg mode and re
,minds you to enter fuel on-
board m preparation for the
flight.
Lights up when Time Remain-
ing is less than 0.8 hour. M&&pose pushbutton switch
used to enter fuel status data
and to reset the Fuel Burned to
zero during the ftight.
The document reference is online, please check the correspondence between the online documentation and the printed version.
