SilverStar BACKPACKER MV Bedienungsanleitung

SilverStar

BACKPACKER MV

www.silverstarmobility.com www.pridemobility.com

™

The symbols below are used throughout this owner's manual and on the product to identify warnings and important

information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/situation. Failure to follow

designated procedures can cause either personal injury, component damage, or

malfunction. On the product, this icon is represented as a black symbol on a yellow triangle

with a black border.

MANDATORY! These actions should be performed as specified. Failure to perform

mandatory actions can cause personal injury and/or equipment damage. On the product,

this icon is represented as a white symbol on a blue dot with a white border.

PROHIBITED! These actions are prohibited. These actions should not be performed at any

time or in any circumstances. Performing a prohibited action can cause personal injury

and/or equipment damage. On the product, this icon is represented as a black symbol with

a red circle and red slash.

SAFETY GUIDELINES

Pride Mobility Products Corp.

INFMANU3698/Rev B/June 2008

Pride Provider:___________________________________________________________________

Address:________________________________________________________________________

Phone Number: ___________________

Purchase Date:____________________ Serial Number:______________________________

NOTE: This owner’s manual is compiled from the latest specifications and product information avail-

able at the time of publication. We reserve the right to make changes as they become necessary. Any

changes to our products may cause slight variations between the illustrations and explanations in this

manual and the product you have purchased. The latest/current version of this manual is available on

our website.

WARNING! An authorized Pride Provider or qualified technician must perform the initial

setup of this lift and must perform all of the instructions in this manual.

Please fill out the following information for quick reference:

088 609 661

Backpacker MV www.silverstarmobility.com 3

CONTENTS

I. INTRODUCTION ......................................................................................................................... 4

II. SAFETY ......................................................................................................................................... 5

III. INSTALLATION .......................................................................................................................... 8

IV. OPERATION ............................................................................................................................... 13

V. CARE AND MAINTENANCE ................................................................................................ 17

VI. TROUBLESHOOTING ............................................................................................................ 18

VII. WARRANTY................................................................................................................................19

APPENDIX I - SPECIFICATIONS ............................................................................................... 20

4 www.silverstarmobility.com Backpacker MV

Welcome to Pride Mobility Products Corporation (Pride). Congratulations on the purchase of your new

Backpacker MV Lift System. The Backpacker MV Lift System design combines the most advanced state-

of-the-art components with modern, attractive styling. We are certain that the design features and trouble-free

operation will add convenience to your daily living and ensure complete satisfaction.

At Pride, your safety is important to us. Please read and follow all instructions in this manual before

operating your lift system for the first time. These instructions were produced for your benefit. Your

understanding of these instructions is essential for the safe operation of your new lift system.

Pride is not liable for damage to property or personal injury arising out of the unsafe use of a Backpacker MV Lift

System. Pride is also not liable for any property damage or personal injury arising out of the failure of any person

and/or user to follow the instructions and recommendations set forth in this manual or any other instructions or

recommendations contained in other Backpacker MV Lift System related literature issued by Pride or contained

on the Backpacker MV Lift System itself.

INTERNET AND PRIVATE PURCHASES

If you purchased your product over the Internet or from a previous owner and you have any questions about the

safe use and/or maintenance of the product, please visit Silver Star’s web site www.silverstarmobility.com or

contact your authorized Pride Provider.

PURCHASER’S AGREEMENT

By accepting delivery of this product, you promise that you will not change, alter, or modify this product or

remove or render inoperable or unsafe any guards, shields, or other safety features of this product; fail,

refuse, or neglect to install any retrofit kits from time to time provided by Pride to enhance or preserve the safe use

of this product.

SHIPPING AND DELIVERY INFORMATION EXCHANGE

We want to hear your questions, comments, and suggestions about this manual. We would also like to hear about

the safety and reliability of your new lift system, and about the service you received from your authorized Pride

Provider.

Please notify us of any change of address, so we can keep you apprised of important information about

safety, new products, and new options that can increase your ability to use and enjoy your new lift system.

Please feel free to contact us at the address below:

Pride Mobility Products Corporation

Attn.: Customer Care Department

182 Susquehanna Ave.

Exeter, PA 18643-2694

customercare@pridemobility.com

1.800.424.8205

NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact

us and we will be glad to send you a new one immediately.

I. INTRODUCTION

Backpacker MV www.silverstarmobility.com 5

II. SAFETY

PRODUCT SAFETY SYMBOLS

The symbols below are used on the lift system to identify warnings, mandatory actions, and prohibited

actions. It is very important for you to read and understand them completely.

Crush Hazard—Moving parts can crush and cut. Keep hands clear.

Read and follow the information in the owner’s manual.

Maximum lifting capacity.

Do not use as a step.

Do not sit on mobility device while activating lift or during transport.

Do not sit on Power Chair or

Scooter while activating lift

or during transport.

Crush Hazard—Moving lift can crush. Keep feet clear during operation.

Avoid exposure to rain, snow, ice, salt, or standing water whenever possible.

Maintain and store in a clean and dry condition.

Do not remove cover! Only authorized personnel may service this equipment.

Refer to manual for important safety information.

Keep area clean and dry and free of obstructions.

6 www.silverstarmobility.com Backpacker MV

II. SAFETY

Explosive conditions exist!

Corrosive chemicals contained in battery.

Wear safety goggles.

Contains Lead.

Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive

conditions.

Disposal and recycling-Contact your authorized Pride Provider for information on

proper disposal of your Pride product and its packaging.

Do not allow unsupervised children to play near the lift while the batteries are

charging.

Keep tools and other metal objects away from battery terminals. Contact with

tools can cause electrical shock.

Pinch/Crush points created during assembly.

Backpacker MV www.silverstarmobility.com 7

LIFTING CAPABILITIES

The Backpacker MV Lift System is designed for a maximum lifting capacity of 350 lbs. (158 kg). Under no

circumstances should the Backpacker MV Lift System be made to exceed this weight limit. Subjecting the lift

system to the strain of lifting more than it is designed to may cause it to fail, resulting in damage to the mobility

device and/or the lift operator. Refer to the mobility device owner’s manual for information on the overall weight of

the mobility device before lifting.

MANDATORY! Adding accessories, oversize batteries, or a different seat will increase the

weight of your mobility device. Verify with your authorized Pride Provider that the total

weight of your mobility device, including additions, DOES NOT exceed 350 lbs. (158 kg).

INSTALLATION

Your Backpacker MV Lift System is an inside SUV lift designed for installation into various brands of SUVs, full-

sized and mini vans. Read and fully understand the installation instructions provided in this manual and related

literature for your brand of vehicle before installing the lift system.

LIFTING NON-PRIDE PRODUCTS

The Backpacker MV Lift System is an extremely versatile device which users may employ to lift items other than

Pride products. Pride has no control over such use, nor can Pride anticipate every possible use to which a Back-

packer MV Lift System may be put. Lifting non-Pride products with the Backpacker MV Lift System is done at

the operator’s own risk, and Pride accepts no liability for damage or injury resulting from such use.

PRELIFT INSPECTION

Before operating the Backpacker MV Lift System, conduct a careful survey of your surroundings to ensure that

the lift system has a clear path of operation. Remove any possible obstructions before operating the lift and do not

allow children to operate or play near the lift. Ensure that all parts of the lift system are completely fastened before

loading the mobility device onto the lift platform, and make sure the mobility device is properly secured before

operating the lift system.

OPERATOR POSITIONING

The operator of the lift should stand a safe distance from the unit being lifted/lowered to ensure that his/her

feet are never positioned under the raised lift platform. The operator should also keep his/her hands clear of the lift

system during operation.

TRANSPORT VEHICLE POSITIONING

Be sure your vehicle is parked on flat, level ground before attempting to load, lift, or remove a mobility

device with the Backpacker MV Lift System. Make sure the vehicle emergency park brake is engaged before

loading or unloading a mobility device.

II. SAFETY

8 www.silverstarmobility.com Backpacker MV

III. INSTALLATION

BACKPACKER MV LIFT SYSTEM INSTALLATION

WARNING! The Backpacker MV Lift should be installed by an authorized service

technician only.

WARNING! At least two people should lift the Backpacker MV into the rear of the vehicle.

Use proper lifting techniques and avoid lifting beyond your physical capability.

WARNING! Avoid pinch points! Do not hold the lift frame by the pivot points when installing

the Backpacker MV.

NOTE: Use only the supplied hardware to install the Backpacker MV Lift System.

Follow these steps to install the Backpacker MV:

1. Install the Backpacker MV securement kit to the vehicle. Refer to the installation instructions supplied with the

securement system.

NOTE: Securement systems vary depending on vehicle manufacturer. Refer to the installation

instructions supplied with your securement system or contact your authorized Pride Provider for

more information.

2. Connect the Backpacker MV to a power source. See “Wiring Harness Installation.”

NOTE: If your lift is equipped with an optional onboard battery, refer to “Onboard Battery Installation.”

3. Ensure that all mounting hardware is fully tightened once the lift has been centered and all required clearances

have been achieved.

NOTE: If there is not adequate clearance between the bumper and the platform frame, you may need to

install an end support bracket. Remove the Backpacker MV from the van and install the end support

bracket close to the rear door opening. Reinstall the lift into the van, making sure that the bolts pro-

truding from the bottom plate of the Backpacker MV closest to the vehicle door snap into the tapped

holes on the top of the end support bracket.

NOTE: It may be required to trim the rear inside sill to achieve the adequate platform clearance with

the platform under load.

4. Run the Backpacker MV through an entire lift cycle. Lower the platform to the ground and then raise the

platform to the fully stowed position in the van. See IV. “Operation.”

NOTE: Ensure the transit screw and washer have been removed from the front of the lift and the rubber

bushing has been installed before operation. See figures 1 and 2.

NOTE: Pay attention to the path of the lift platform during operation. Make sure the lift does not rub

against or interfere with the vehicle in any way. If you notice any contact between the lift platform and

the vehicle, stop lift operation immediately and contact your authorized Pride Provider for assistance.

Backpacker MV www.silverstarmobility.com 9

III. INSTALLATION

Figure 1. Transit Screw Removal

WARNING! Release the “DOWN”

button when the lift platform

touches the ground. Do not allow

the motor to run after the lift

platform has touched the ground.

Allowing the motor to run will

increase the pressure on the lift

platform and may result in product

or vehicle damage.

Wiring Harness Installation

The wiring harness is approximately 25 ft. (7.62

meters) long and will accommodate most vehicles.

NOTE: You may wish to perform a practice run

before installing the wiring harness. Route a

piece of light rope (equivalent to the gage of the

wiring harness) along the anticipated path ob-

serving contact points, potential rubbing/chaf-

ing points, and any sharp edges. Remove sharp

edges with a fine grade file, then treat the steel

with a rust inhibitor or metal sealant.

WARNING! Route the wiring

harness through the vehicle rather

than under the vehicle to avoid

coming in contact with sharp

edges, extreme temperatures,

moving parts, and roadway debris.

Power shorts may occur if wires

come in contact with hot exhaust

parts or sharp edges.

WARNING! Never attach the wiring

harness to a secondary power

source. Do not attempt to use

trailer wiring to power the lift

system. The wiring harness must

be connected directly to the

vehicle battery.

RUBBER BUSHING

TRANSIT SCREW

WASHER

Figure 2. Rubber Bushing Location/Installation

10 www.silverstarmobility.com Backpacker MV

III. INSTALLATION

Figure 3.Wiring Harness Installation

GROUNDINGWIRE HAND CONTROL

FUSE

VEHICLE BATTERY WIRINGHARNESS LIFT WIRING CONNECTION

Follow these steps to route the Backpacker MV wiring harness:

1. Route the lift system wiring harness (starting at the lift) through the interior of the vehicle until you reach the

vehicle battery. See figure 3.

WARNING! Avoid routing the wire harness where it will interfere with or become pinched

by the securement system.

2. Conceal the harness behind or under the interior panels (there should be existing holes). Be certain that the

harness is protected with a rubber grommet when passing it through the metal panels and into the engine

compartment.

3. Inside the engine compartment, secure the harness to the firewall and the inner fender with plastic wire ties. Use

care not to cause abrasions to the wiring harness. It is important to secure the wiring harness at various points

along its run of the vehicle.

WARNING! Do not cut or shorten the wiring harness. If the harness is too long, coil the

excess wire and secure it with plastic wire ties.

4. Remove the 15-amp fuse from the wiring harness. See figure 3.

5. Connect the red wire to the positive (+) terminal and the black (grounding) wire to the negative (-) terminal

of the vehicle battery.

6. Reinstall the 15-amp fuse to the wiring harness.

WARNING! Before operating the lift, inspect the wiring harness for proper routing and grounding.

Improper routing can cause damage to the harness, and improper grounding can cause damage

to the electrical system.

Inhaltsverzeichnis

Andere SilverStar Hebesystem Handbücher

SilverStar

SilverStar Backpacker MV Bedienungsanleitung

Beliebte Hebesystem Handbücher anderer Marken

morse

morse 82H-124 Bedienungsanleitung

Braun

Braun NL955 Series Bedienungsanleitung

haacon

haacon 1889.10 Bedienungsanleitung

Protekt

Protekt AT 252 Bedienungsanleitung

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Bedienungsanleitung

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Bedienungsanleitung

Genie

Genie Z-60/34 Bedienungsanleitung

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Bedienungsanleitung

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Bedienungsanleitung

Custom Equipment

Custom Equipment Hy-Brid 3 Series Programmierhandbuch

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Programmierhandbuch

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Programmierhandbuch

BERG

BERG BeNomic EasyLeaf Bedienungsanleitung

Powermate

Powermate LiftGate LG-3 Bedienungsanleitung

Snorkel

Snorkel TM12 Series Bedienungsanleitung

Terberg

Terberg OMNIDEKA Bedienungsanleitung

Harmar Mobility

Harmar Mobility AL625 Betriebsanleitung

Rotary

Rotary SPO16 Bedienungsanleitung