SilverStar LT-215 Bedienungsanleitung

LT-215

RGB LASER LIGHT

USER MANUAL

www.yagang.conm Version 1.0

Professional LightingProfessional Lighting

SILVER STARSILVER STAR

2005.11.17

Open box to check

ØWhen you receive the product, take it gently check if there is problem which cause

in transportation. At the same time please pay attention to see if there are some

parts enclosed:

INSTALLATION

ØPlease confirm whether the voltage you have is same as signed on the light before

install.

ØInstalled by technician. It muse be placed safety and best light angle.

ØMust keep space between light equipments and combustibles more than half a

meter. Keep space between light equipments and wall more than 0.15 meter.

ØThe fans and vent-pipes should not be jammed by other equipment and decorate

materials.

ØThe light must be fixture installed.

ØIn safety view please put ground wire into the ground.

ATTENTION

ØPlease do not open the bottom cover yourself without permission. Operate it

accord the user manual. Please call the technician in case the machine broken

down.

ØDo not use it under the damp and rain.

ØPay attention to prevent the light from strong bump.

ØPrevent the dust into the product

ØKeep the vent-pipe well while working.

ØKeep the plug insert well before put into power.

ØDon't look the light directly to prevent make some destroy with eyes.

ØDon't light or extinguish frequently, otherwise the life span of the light tube will be

shortened.

ØIn view of the special characters, after operated the light an hour the product shall

be paused about 15 minutes before be used next time.

ØKeep the space between light equipments and the lighted things more than one

meter.

ØDon't touch the product and draw the power line if you hand wet.

ØDon't open the cover for there have no parts the user can repair.

1. 1unit laser light 2. 1pc power cable

3.1pc Pin3 signal cable 4. 1pc user manual

Technology paramters

Cooling mode Air cooling (DPSS)

Input voltage AC220~240V 50/60Hz

Total power 50W

Colour Red Yellow Green Cyan Blue Purple White

DMX Channel 13

Scanner Simple scan motor

Scan angle 0~ 30

Control mode Music mode, Auto-mode, Master/slave, DMX512

ØDon't operate the light without lamps.

ØIf the semiconductor laser doesn't as light as before or there have some destroy

with lens or other parts, please contact the distributor in time.

ØWhen you want to retransfer the products, you'd better use the original package

to shockproof.

Maintain

Please use cotton stick dipped alcohol to wipe the mirrors at regular. Do

not use the wet cloth or chemical impregnant to clean the mirrors.

Please use the soft cloth to clean the surface of product.

ATTENTION:Disconnect input power before maintain.

NOTE: Don't seperate laser machine from laser power and repaire them by

yourself otherwise no good repair service will be supplied.i

Don't look straightly at the light sources.

Function code setting

DMX address code setting

Binary code

Address switch

Alogorism

Switch for DMX control mode.

The setting in the picture is signal

acceptable.

Address switch

Function

Music-mode

Audo-mode

Slave mode

Panel operation

POWER

SWITCH

DMX

OUTPUT DMX

INPUT

Front panel

Back panel

POWER Power LED

Beam out: Inset mirror

POWER In fuse inside

POWER ON/OFF Power switch

DMX IN/OUT DMX512 signal

Security key switch Switch on/off power

MIN MAX Potentiometer

MIC: Music receiver

9ADDRESS: Address code switch. The 10th code is switch code. If the 10th code is

OFF, the 1-9 codes are function code. If the 10th code is ON, the fixture can be

controlled by DMX512 signal and other codes are DMX address codes.

LT-215 RGB LASER LIGHT

LT-215 DMX Channel List

Automaticacceleratedmanualmode

MusicActive,Channel5~13outoffunction

Auto-mode,Channel5~13outoffunction

Soundacceleratedmanualmode

Fntion

1ControlMode

Channel Value

0~63

64~127

128~191

192~255

127Patterns

42Class speed (0~255)/6=(0~42)

No function

Horizontal rotating (Around Y axis)

Vertical rotating

Horizontal & Vertical rotating

No function

Rotating

Dotting(Only dot, noline)

Dotrotating

Nofunction

Horizontalmovement

Verticalmovement

Sidelongmovement

Nofunction

ExtendinVertical

ExtendinHorizontal

ExtendinHorizontal&Vertical

(0~255)/6=(0~42) 0 no function

255 class speed(From slow to fast)

42 class size (1~255)/6=(0~42)

1~19 smaller 20 Original size 21~42 Enlarge

Nofunction

Fromsmall tolarge

Fromlargetosmall

Fromsmall tolargeandthentosmall

255class speed (From fast to slow)

Original size

White

Blue

Cyan

Green

Yellow

Red

Basic colours

0~255

3 Pattern

0~255

4 Speed

0~63

64~127

128~191

192~255

5Main Pattern

Rotating

6Dot Rotating

0~63

64~127

128~191

192~255

0~63

64~127

128~191

192~255

7 Move

0~63

64~127

128~191

192~255

0~63

64~127

128~191

192~255

8Extend

0~255

Zoom

Pattern Size 0

Drawing speed

Scan speed

Colour speed

2Colourof

mainpattern

0~22

23~45

46~68

69~91

92~114

115~137

138~160

161~183

184~206

207~229

230~252

253~255

Single Colour change

Stochastic colour change(Basic colour + one new colour)

Rainbow colour flow

1~255

Purple

(Around X axis)

(Around Z axis)

Problem andAnswer

Problem Causation Replace part Serries number

No Power Fuse broken Fuse

Scanner broken Scanner

Power supply broken 15V

No response to

Music or it is

difficult be actived

by music

MIC Broken

Code control board

Potentionmeter broken

MIC

Code control board

Potentionmeter

78E58BIC broken

Code control board broken

X,Yscanner no

strength or no

patternor scanner

shaking

78E58BIC

78E58BIC Broken 78E58BIC

Code control board

09-00-3001-01

16-03-0001-00

26-2A-LT6V20-00

04-03-0105-03

00-78E58B-00

15-01-0002-00

00-78E58B-00

26-2A-LT6V20-00

Can not control

other function

OK,Such as laser

diode and fans

Code board broken

Control mode

incorrect Refer to manual

Super speed code control board

Power supply broken 12V

Address code board broken L 6Address code board

26-2A-LT6V20-00

16-03-0019-00

26-2A-LT6SW-00

No beam or beam

dim or beam can't

close, but other

functions OK

Power supply broken

15V

Scan board broken Scan board

16-03-0001-00

26-2A-FASTSCAN-00

Code board broke Super speed code control board

Operation mode

incorrect Refer to manual

26-2A-LT6V20-00

Scan mirror dirty

Laser diode broken

Clean with alchole

Green laser diode

Red laser diode

Blue laser diode

07-01-0005-00

07-03-0080-00

07-02-0020-01

Power supply broken 15V 16-03-0001-00

Inhaltsverzeichnis

Andere SilverStar Beleuchtungsausrüstung Handbücher

SilverStar

SilverStar FREZNO 250 HEX Bedienungsanleitung

SilverStar

SilverStar NEPTUNE 700 PROFILE Bedienungsanleitung

SilverStar

SilverStar WASH 250 Series Bedienungsanleitung

SilverStar

SilverStar CAM3/ETZ Bedienungsanleitung

SilverStar

SilverStar INDIGO 4000XS Bedienungsanleitung

SilverStar

SilverStar LT-VIII Bedienungsanleitung

SilverStar

SilverStar ECLIPSE MINI COLOR SS867 Bedienungsanleitung

SilverStar

SilverStar SS9151SC Bedienungsanleitung

SilverStar

SilverStar MAXCYC SS809 Bedienungsanleitung

SilverStar

SilverStar MX-COLOR Bedienungsanleitung

SilverStar

SilverStar Show Wash 120 Bedienungsanleitung

SilverStar

SilverStar YX-2007 Bedienungsanleitung

SilverStar

SilverStar ECLIPSE 1000 RGBAL HC SS5152 Bedienungsanleitung

SilverStar

SilverStar SS847 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung