Simado GFXD1111S Bedienungsanleitung
SIMADO GFXD1111S
Quick Start
SIMADO GFXD1111SSIMADO GFXD1111S
SIMADO GFXD1111SSIMADO GFXD1111S
SIMADO GFXD1111S
Fixed Cellular Terminal and Router with Data Port
Quick Start
Introduction
Thank You for choosing Matrix SIMADO GFXD1111S! Please read the instructions
given in this quick start before you install this feature reached system.
This quick start is meant to help you to install the basic features and parameters
of the system. For the detailed information on installing and configuring SIMADO
GFXD1111S, please refer 'SIMADO GFXD1111S System Manual' provided to
you on the CD-ROM.
Either GSM or CDMA module can be installed in the Mobile Port of GFXD1111S
as per the requirement of the user. Therefore, the Mobile Port can be either GSM
or CDMA.
• SIM Card is installed in the GSM Port and RUIM Card is installed in the
CDMA Port of the gateway.
• Consider SIM as RUIM if CDMA module is installed in the gateway.
Call Divert feature will not work If the CDMA module is installed in the Mobile
port of SIMADO GFXD1111S.
SIMADO GFXD1111S supports 3G module for voice. When 3G module is
installed in the system, it will have following effect:
• Frequency Band Selection not required.
• Current calls will be disconnected if Call Waiting Service is not disabled
in the SIM Card. Disable Call Waiting in SIM Card before inserting it in
SIMADO GFXD1111S.
Know your SIMADO GFXD1111S
SIMADO GFXD1111 has
1 FXS Port,
1 FXO Port,
a Communication Port,
a SIM Card Slot,
an Antenna Connecter,
AC Mains Socket and
5 LEDs.
SIMADO GFXD1111S has
1 FXS Port,
1 FXO Port,
a Communication Port,
a SIM Card Slot,
an Antenna Connecter,
a Power Socket and
5 LEDs.
LEDs
5 LEDs labeled as FXS, FXO, NW, RDY and PWR are as shown in the figure
below. These LEDs indicate the status of the ports, various events occurring on
the ports and also the error conditions.
Ready
Network
FXS
FXO
Power
Applications of SIMADO GFXD1111S
SIMADO GFXD1111S finds its applications in corporate business establishments,
STD/PCO booth, SOHO etc… Various applications of SIMADO GFXD1111S are
as shown below:
Case 1: SIMADO GFXD1111S as Stand-alone (Mobile-FXO Mode)
PSTN
GSM/
CDMA
Network
FXO
Port
GSM/
CDMA
FXS
Port
RJ-11
GFXD1111S
FSK/DTMF
Telephone
Instrument
COM
Case 2: SIMADO GFXD1111S as Stand-alone (Mobile-FXS Mode)
PSTN
GSM/
CDMA
Network
FXO
Port
GSM/
CDMA
FXS
Port
RJ-11
GFXD1111S
COM
Case 3: SIMADO GFXD1111S connected to PCO Machine
PSTN
GSM/
CDMA
Network
FXO
Port
GSM/
CDMA
FXS
Port
PCO Machine
RJ-11
GFXD1111S
COM
Case 4: SIMADO GFXD1111S interfaced with FXO Port of PBX (Mobile-FXO Mode)
PSTN
GSM/
CDMA
Network
FXO
Port
GSM/
CDMA
FXS
Port
RJ-11
GFXD1111S
PBX
T1
T2
Tn
S1
S2
Sn
COM
Case 5: SIMADO GFXD1111S interfaced with FXO Port of PBX (Mobile-FXS Mode)
PSTN
GSM/
CDMA
Network
FXO
Port
GSM/
CDMA
FXS
Port
RJ-11
GFXD1111S
PBX
T1
T2
Tn
S1
S2
Sn
COM
Case 6: SIMADO GFXD1111S interfaced with FXS Port of PBX (Mobile-FXO Mode)
PSTN
GSM/
CDMA
Network
FXO
Port
GSM/
CDMA
FXS
Port
RJ-11
GFXD1111S
PBX
T1
T2
Tn
S1
S2
Sn
COM
Case 7: SIMADO GFXD1111S interfaced with FXS Port of PBX (Mobile-FXS Mode)
PSTN
GSM/
CDMA
N/w
FXO
Port
GSM/
CDMA
FXS
Port
RJ-11
GFXD1111S
PBX
T1
Tn
S1
S2
S3
S4
Sn
RJ-11
COM
Before You Start
Verify Package Contents:
Before installing SIMADO GFXD1111S, verify the package contents.
The Sales Kit of SIMADO GFXD1111 contains:
SIMADO GFXD1111
with Antenna TNC Male
Quick Start CD containing System
Manual and Quick Start
Two Screws M 7/30 with Grips
A Mounting Template
A Warranty Card set
Power Cord (Country specific)
COM Port Cable (RS232)
Fuse Fast Blow 5x20 2Amp.
Fuse Slow Blow 5x20 1Amp.
The Sales Kit of SIMADO GFXD1111S contains:
SIMADO GFXD1111S
with Antenna TNC Male
Quick Start CD containing System
Manual and Quick Start
Adaptor 12VDC, 1.25A
(Country Specific)
Two Screws M 7/30 with Grips
Cable for Modem
A Mounting Template
A Warranty Card set
Make sure that all the above mentioned components are present when you open
the Sales Kit of SIMADO GFXD1111S. In case any of the part is missing or
damaged, contact the vendor from whom you have purchased the system.
Get following things ready:
1. One SIM card from GSM service provider.
2. One telephone instrument with LCD display. (Stand-alone)
3. One analog line (trunk line) from PSTN.
4. One computer for programming and generating reports on HyperTerminal.
5. Connection to Mains power.
Installing SIMADO GFXD1111S
Precautions and Safety Instructions:
Take proper precautions while installing SIMADO GFXD1111S to reduce the risk
of fire, electric shock and injury to the system as well as the person using it.
(Refer 'Protecting SIMADO GFXD1111S' topic in the System Manual for details)
Mounting SIMADO GFXD1111S on Wall:
• Install GFXD1111S at the any dust free and moisure free place.
• Select a suitable place on the wall for mounting the SIMADO GFXD1111S.
• Put the mounting template on the wall and mark the nail hole on the wall.
• Drill a hole of appropriate size.
• Insert the nail grip in the hole.
• Insert the screw and tighten it leaving the screw head a few millimeters
protruded of the wall.
• Check the strength of the nail.
• Hang SIMADO GFXD1111S on the wall.
Connecting SIMADO GFXD1111S:
SIMADO GFXD1111S can be used as stand-alone system as well as it can also
be interfaced with the PBX.
Follow the steps given below to connect GFXD1111:
• Place SIMADO GFXD1111 at a place where it can get AC power supply and
network signals.
• Connect Antenna provided with the system to the TNC connector, labeled
as 'ANT' of GFXD1111.
• Connect telephone instrument with CLI display to the FXS Port of GFXD1111
with the help of RJ11 cable. You can also connect FXS Port of GFXD1111 to
the FXO Port of the PBX.
• Connect PSTN (CO) line to the FXO Port of GFXD1111 with the help of RJ11
cable. You can also connect FXO Port of GFXD1111 to the FXS Port of the
PBX.
• Connect a computer to the COM Port of GFXD1111 with the help of COM
Port cable.
• Insert SIM Card/RUIM Card of the service provider in the SIM Card Slot of
GFXD1111.
• Connect AC Mains input of GFXD1111 to the AC Mains Socket and Power
ON the system.
Follow the steps given below to connect GFXD1111S:
• Place SIMADO GFXD1111S at a place near wall Socket and where it can
get proper network signals.
• Connect Antenna provided with the system to the TNC connector, labeled
as 'ANT' of GFXD1111S.
• Connect telephone instrument with CLI display to the FXS Port of GFXD1111S
with the help of RJ11 cable. You can also connect FXS Port of GFXD1111S
to the FXO Port of the PBX.
• Connect PSTN (CO) line to the FXO Port of GFXD1111S with the help of
RJ11 cable. You can also connect FXO Port of GFXD1111S to the FXS Port
of the PBX.
• Connect a computer to the COM Port of GFXD1111S with the help of Ethernet
cable.
• Insert SIM Card/RUIM Card of the service provider in the SIM Card Slot of
GFXD1111S.
To protect the SIM Card inserted in the system from being mis-used, SE is
recommended to enable SIM Protection and change the SIM PIN. (Refer
'Step 2: SIM PIN' below for details)
Inhaltsverzeichnis
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise