Simco 6422e Bedienungsanleitung

IONIZATION SOLUTIONS

Point of Use

Ionizing Blower

Model 6422e/6422e-AC

User’s Manual

19-6422-M-01 Rev 4

About Simco-Ion

Simco-Ion develops, manufactures, and markets system solutions

to manage electrostatic charge. As the world's largest provider of

electrostatics management products and services, Simco-Ion

improves its customers' business results by providing a total

solution to their electrostatic discharge and electromagnetic

interference challenges. Simco-Ion Technology Group is a division

of Illinois Tool Works (ITW), located in Alameda, California. For

more information about Simco-Ion visit www.simco-ion.com or call

800-367-2452. Simco-Ion is ISO 9001 and ANSI ESD S20.20

certified.

19-6422-M-01 Rev 4

Contents

1 Description .......................................................................... 1

1.1 Point of Use Ionizing Blower ................................................................... 2

1.2 IsoStat® Technology............................................................................... 3

1.3 Performance ........................................................................................... 4

1.4 Power Requirements .............................................................................. 5

2 Setup & Operation.............................................................. 7

2.1 Box Contents .......................................................................................... 8

2.2 Blower Placement ................................................................................... 9

2.3 Power Connections............................................................................... 12

2.4 FMS Connection ................................................................................... 15

2.5 Turning on the Blower........................................................................... 17

2.6 Alarms................................................................................................... 18

3 Maintenance ...................................................................... 19

3.1 Maintenance Requirements.................................................................. 20

3.2 Cleaning the Chassis............................................................................ 21

3.3 Cleaning the Emitter Points .................................................................. 22

3.4 Auto-Clean System................................................................................ 23

4 Specifications................................................................... 25

5 Warranty & Service .......................................................... 27

19-6422-M-01 Rev 4 1

Description

1.1 Point of Use Ionizing Blower

1.2 IsoStat® Technology

1.3 Performance

1.4 Power Requirements

19-6422-M-01 Rev 4 2

1.1 Point of Use Ionizing Blower

The Point of Use Ionizing Blower Model 6422e is a compact ionizing

Blower that controls static discharge in areas where static build-up

can cause contamination, ESD, material-handling problems, or

microprocessor lock-up. The internal emitter points are

electrostatically shielded to eliminate field-induced charging.

Steady-state DC ion emission provides fast discharge with low

airflow, allowing less disturbance of delicate product.

The Model 6422e has a red alarm indicator LED on the front of the

chassis. The eight-pin terminal strip on the back of the unit provides

a 4-20 mA current loop and relay output connection to your facility

monitoring system (FMS) in addition to the 24 VDC input

connection.

Figure 1. Front of the Model 6422e

Figure 2. Back of Model 6422e

The Model 6422e-AC is the same as the Model 6422e with the

addition of our Auto-Clean System as described in Section 3.4 on

page 23.

19-6422-M-01 Rev 4 3

1.2 IsoStat®Technology

IsoStat technology makes Simco-Ion blowers the most reliable

ionizers available. IsoStat enables operation without grounding

wires or cables while still maintaining ionizer balance. The 6422e

Blower’s internal emitter points are electrostatically shielded to

eliminate field-induced charging. Steady-state DC ion emission

provides fast discharge with low airflow for less disturbance of

delicate product.

Ionizers incorporating IsoStat technology never need calibration

and require very little maintenance. IsoStat is based on a law of

physics, Conservation of Charge, which states that charge cannot

be created or destroyed in an isolated system. By isolating the

ionizer’s emitter points from ground, IsoStat ensures equal numbers

of positive and negative ions.

19-6422-M-01 Rev 4 4

1.3 Performance

The 6422e Blower will reduce a static charge of ±1,000V down to

100V in approximately four seconds at a distance of 1 ft. (30.48

cm)1. See Table 1 for typical discharge times as determined by

distance. Distance is measured from the front center of the Blower.

Ionization balance is better than ±20V at 1 ft. (30.48 cm).

Table 1. Performance

* Testing was performed with a charge plate monitor in accordance

with ionization standard ANSI/ESD STM3.1-2006 of the ESD

Association.

1. Four-second discharge at one foot distance is when operating Blower

with AC power. Discharge time at one foot when operating Blower with

DC power is five seconds.

Distance Discharge Time

1 ft (30.48 cm) 4 seconds*

2 ft (61 cm) 10 seconds

3 ft (91.44 cm) 19 seconds

19-6422-M-01 Rev 4 5

1.4 Power Requirements

The maximum power requirement for the Model 6422e is 6W. Three

different power supplies are available as options for the Blower,

providing 24 VDC or 24 VAC. The fourth power source is 24 VDC

from your process equipment using the terminal block and eight pin

connector on the rear of the Blower.

Simco-Ion offers three power supplies for use with this product:

• Transformer (p/n 14-1320-01) for use with 120 VAC/60 Hz

systems

• Transformer (p/n 14-1330) for use with 230 VAC/50 Hz systems

• Both 14-1320-01 and 14-1330 transformers provide the Blower

with appropriate 24 VAC

• AC/DC universal power supply (p/n 14-1322) for use with 120/

240 VAC 50/60 Hz provides the Blower with 24 VDC power.

Caution:

The use of improper input voltage may result in poor

performance or damage to the unit.

Damage caused to the power supply from operation in an

environment that exceeds the specified limits will void the

warranty.

Achtung:

Die Verwendung unzulässiger Eingangsspannung kann zu

schlechter Leistung und Beschädigung des Gerätes führen.

Schäden an der Stromversorgung, verursacht durch Betrieb

unter Bedingungen außerhalb der spezifizierten Grenzwerte,

fallen nicht unter die Garantiebestimmungen.

19-6422-M-01 Rev 4 6

19-6422-M-01 Rev 4 7

Setup & Operation

2.1 Box Contents

2.2 Blower Placement

2.3 Power Connections

2.4 FMS Connection

2.5 Turning on the Blower

2.6 Alarms

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Simco Gebläse Handbücher

Simco

Simco minion2 Bedienungsanleitung

Simco

Simco Aerostat PC Bedienungsanleitung

Simco

Simco BlowION Bedienungsanleitung

Simco

Simco AEROSTAT HP-N-Ex Bedienungsanleitung

Beliebte Gebläse Handbücher anderer Marken

Weed Eater

Weed Eater VS2000BV Bedienungsanleitung

KRAUSMANN

KRAUSMANN U37020-00 Bedienungsanleitung

Bosch

Bosch ALB 36 LI Bedienungsanleitung

Cub Cadet

Cub Cadet HB425 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro BLB482 Bedienungsanleitung

ARIETE

ARIETE 2768 Bedienungsanleitung

NuTone

NuTone 331H Bedienungsanleitung

GÜDE

GÜDE GLB 200 18 Li-Ion Bedienungsanleitung

I.VA.CO.

I.VA.CO. SC Series Betriebsanleitung

DeWalt

DeWalt DCE100 Bedienungsanleitung

Becker

Becker SV 7.330 Bedienungsanleitung

Metabo

Metabo AG 18 Pro Bedienungsanleitung

Desa

Desa GA3650TB Bedienungsanleitung

Echo

Echo Power Blower PB-230LN Bedienungsanleitung

Echo

Echo PB-413H Bedienungsanleitung

Black & Decker

Black & Decker BV3100 Bedienungsanleitung

Ryobi

Ryobi RY08570 Bedienungsanleitung

Haaga

Haaga 355 Bedienungsanleitung