Sime BRAVA SLIM 30 BFR Benutzerhandbuch

Fonderie SIME S.p.A. 6322894D - 06/2022 - R7

Cod.

INSTALLATION AND SERVICING INSTRUCTIONS

BRAVA SLIM 30 BFR

Gas Safety Certiﬁed AS/NZS 5263.1.2

LN: SAI-400197

CAUTION

This product must be installed exclusively by professional-

ly qualiﬁed personnel in accordance with the requirements

of the standards AS/NZS 5601, AS/NZS 3500, AS/NZS 3000

(current version) of the local gas, electricity authorities and

other relevant legislation.

Low temperature wall mounted boiler

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

To consult the documentation,

visit our website www.sime.it

SAFETY WARNINGS AND REGULATIONS

m

WARNINGS

–After having removed the packaging

make sure that the product supplied is

integral and complete in all its parts. If

this is not the case, please contact the

Dealer who sold the appliance.

–The appliance must be used as intend-

ed by

Sime

who is not responsible for

any damage caused to persons, ani-

mals or things, improper installation,

adjustment, maintenance and improp-

er use of the appliance.

–In the event of water leaks, disconnect

the appliance from the mains pow-

er supply, close the water mains and

promptly inform professionally quali-

ﬁed personnel.

–Periodically check that the operating

pressure of the water heating system

when cold is

1-1.2 bar (100-120 kPa)

. If

this is not the case, increase the pres-

sure or contact professionally qualiﬁed

personnel.

–If the appliance is not used for a long

period of time, at least one of the fol-

lowing operations must be carried out:

set the main system switch to "OFF";

close the gas and water valves for the

water heating system.

–In order to ensure optimal appliance

operations

Sime

recommends that

maintenance and checks are carried

out

TWICE A YEAR

m

WARNINGS

–

It is recommended that all operators

read this manual carefully in order to

use the appliance in a safe and rational

manner.

–

This manual

is an integral part of the

appliance. It must therefore be kept

for future reference and must always

accompany the appliance in the event

the appliance is transferred or sold to

another Owner or User or is installed

on another system.

–

Installation and maintenance

of this

appliance must be carried out by a

qualiﬁed company or by a profession-

ally qualiﬁed technician in accordance

with the instructions contained in the

manual. Once the work is complete,

the company or technician will issue a

declaration of conformity with national

and local technical standards and leg-

islation in force in the country where

the appliance will be used.

–

Any repairs on the appliance

must be

carried out solely by professional-

ly qualiﬁed personnel, using original

spare parts only. Failure to comply with

these instructions can jeopardise the

appliance’s safety and void the warran-

ty with immediate effect.

–This appliance is not suitable for pool

or SPA heating

–

Fonderie SIME S.p.A.

reserves the right

to make improvements to its prod-

ucts at any time without prior notice,

without compromising their essential

characteristics. The graphic illustra-

tions and/or images in this document

may show optional accessories that

vary according to the country in which

the appliance is used.

RESTRICTIONS

d

IT IS FORBIDDEN

–To allow appliance to be used by chil-

dren or unassisted disabled persons.

–To use electrical devices or appliances

such as switches, electrical appliances etc

if you can smell fuel. If this should happen:

open the doors and windows to air the

room;

close the gas isolation device;

promptly call for professional assis-

tance.

–To touch the appliance with bare feet or

with any wet part of the body.

–To carry out any technical intervention

or cleaning operation before having

disconnected the appliance from the

mains power by setting the main switch

to "OFF", and closing the gas supply.

–To modify the safety or adjustment

devices without authorization and in-

structions from the manufacturer.

–To block the condensate drain (if present).

–To pull, detach or twist the electrical

cables coming out of the appliance

even if the appliance is disconnected

from the mains power supply.

–To expose the boiler to atmospheric

agents. These boilers can also be in-

stalled in partially covered areas, as

per EN 15502, with a maximum am-

bient temperature of 60°C and a min-

imum ambient temperature of - 5°C.

It is recommended that the boiler is

installed below weathered roofs, on

the balcony or in a protected niche, to

protect it from exposure to weathering

agents (rain, hail and snow). The boiler

is equipped as standard with an anti-

freeze function.

d

IT IS FORBIDDEN

–To block or reduce the size of the venti-

lation openings of the room where the

appliance is installed, if present.

–Remove the mains power and gas sup-

ply from the appliance if the external

temperature could fall below ZERO

(risk of freezing).

–To leave containers with ﬂammable

substances in the room where the ap-

pliance is installed.

–To dispose of the packaging material

irresponsibly as it could be dangerous.

Packaging must be disposed of as speci-

ﬁed by the legislation in force in the coun-

try where the appliance will be used.

–Do not install the boiler in special en-

vironments that may limit its optimum

operation (e.g. marine environment).

–To spray aerosols in the vicinity of this

appliance while it is in operation.

–To use or store ﬂammable materials in

or near this appliance.

–To place articles on or against this ap-

pliance.

–To modify this appliance.

Dear Customer,

Thank you for purchasing a

Sime Brava Slim 30 BFR

boiler, a lat-

est-generation low-temperature modulating appliance, with all

the technical and performance features to satisfy your heating

needs, in maximum safety and with low running costs.

RANGE

MODEL CODE

Brava Slim 30 BFRi - (NATURAL GAS) 8112540

Brava Slim 30 BFRe - (NATURAL GAS) 8112541

COMPLIANCE

Our company declares that

Brava Slim 30 BFR

boilers comply

with the following Australian Standards

–AS/NZS 5601 Gas Installations

–AS/NZS 3500 Water services, Sanitary plumbing and drainage

–AS/NZS 3000 Electrical installations, Buildings, structures

and premises

License Number:

SAI-400197

SYMBOLS

a

WARNING

To indicate actions which, if not carried out correctly,

can result in injury of a general nature or may damage

or cause the appliance to malfunction; these actions

therefore require particular caution and adequate

preparation.

f

ELECTRICAL HAZARD

To indicate actions which, if not carried out correct-

ly, could lead to injury of an electrical nature; these

actions therefore require particular caution and ade-

quate preparation.

d

IT IS FORBIDDEN

To indicate actions which MUST NOT BE carried out.

m

CAUTION

To indicate particularly important and useful informa-

tion.

MANUAL STRUCTURE

This manual is organized as follows.

USER INSTRUCTIONS

TABLE OF CONTENTS 5

DESCRIPTION OF THE APPLIANCE

TABLE OF CONTENTS 13

INSTALLATION AND SERVICING

INSTRUCTIONS

TABLE OF CONTENTS 21

USER INSTRUCTIONS

TABLE OF CONTENTS

1USING THE BOILER BRAVA SLIM 30 BFR 6

1.1 Control panel ...................................6

1.2 Preliminary checks ..............................7

1.3 Ignition ........................................7

1.4 Adjusting the heating temperature .................7

1.5 Fault / malfunction codes .........................7

2SHUTDOWN 8

2.1 Temporary shutdown.............................8

2.2 Shutting down for long periods ....................8

3MAINTENANCE 9

3.1 Adjustments....................................9

3.2 External cleaning................................9

3.2.1 Cleaning the cladding................... 9

4DISPOSAL 9

4.1 Disposal of the equipment (European Directive

2012/19/EU) ....................................9

5HANDOVER INSTRUCTIONS 10

6SERVICE RECORDS 10

1USING THE BOILER BRAVA SLIM 30 BFR

1.1 Control panel

Fig. 1

FUNCTIONAL BUTTONS

yIf pressed once or more than once for at least 1 second

during normal operation, this button allows the user to

change the boiler operating mode in a cyclical sequence

(Stand-by – Summer – Winter). If the boiler is experienc-

ing a fault which can be reset, it allows boiler operation

to be unblocked. (Note: the "SUMMER" mode is not ap-

plicable to this boiler).

(In "parameter setting", the user can scroll through the

parameter index (decreasing) by pressing this button.

tDuring normal operation, pressing this button displays

the ﬂow temperature set point which can be between 20

and 80°C. In "parameter setting", the user can scroll

through the parameter index (increasing) by pressing

this button.

<During normal operation, pressing this button allows the

user to reduce the ﬂow temperature set point. In "pa-

rameter setting/display", the user can modify the pa-

rameter setting or value (decreasing) by pressing this

button.

>During normal operation, pressing this button allows

the user to increase the ﬂow temperature set point. In

"parameter setting/display", the user can modify the

parameter setting or value (increasing) by pressing this

button.

cProgramming connector cover plug.

NOTE:

pressing any one of these buttons for more than 30 sec-

onds generates a fault on the display without preventing boiler

operation. The warning disappears when normal conditions are

restored.

DISPLAY

“SUMMER”

. The symbol for "Summer" mode is dis-

played. If the symbols l and n are ﬂashing, this indi-

cates that the chimney sweep function is active.

“WINTER”

. This symbol appears when the boiler is oper-

ating in "Winter" mode. If no operating modes have been

enabled both symbols l and n will be off.

“RESET REQUIRED”

. The message indicates that after

having repaired the fault, normal boiler operation can be

restored by pressing the button y.

“HEATING”

. This symbol lights up during heating oper-

ation or during the "chimney sweep function It ﬂashes

during the selection of the heating set point.

“BLOCK” DUE TO NO FLAME

“FLAME PRESENCE"

“POWER LEVEL"

. This indicates the power level at which

the boiler is operating.

“PARAMETER"

. This indicates that the user may be in

parameter setting/display, or "info" or "counter", or in

"activated alarms" (history).

“ALARM"

. This indicates that a fault has occurred. The

number speciﬁes the cause which generated the alarm.

“CHIMNEY SWEEP"

. This indicates that the "chimney

sweep function" has been activated.

“HEATING SYSTEM PRESSURE"

. Display of heating system

pressure.

"ECO", ALTERNATIVE ENERGY SOURCES

. Where active, it

indicates that there is a solar system available.

"MAINTENANCE REQUEST"

. If active, it shows it is time to

perform maintenance on the boiler.

m

CAUTION

–Access to the control panel of model

Brava Slim 30

BFRe

is possible after loosening screw (1) and re-

moving panel (2).

–On completion of the operations, reﬁt the panel on

the control panel and secure fully.

Fig. 2

1.2 Preliminary checks

a

WARNING

–Should it be necessary to access the areas in the

bottom part of the appliance, make sure that the

system components and pipes are not hot (risk of

burning).

–Before replenishing the heating system, put on pro-

tective gloves.

Commissioning of the

Brava Slim 30 BFR

boiler must be carried

out by professionally qualiﬁed technicians, after which the boil-

er can operate automatically. It may, however, be necessary for

the user to start the appliance autonomously without involving a

technician: for example, after a holiday.

First of all check that the gas isolation and water system valves

are open.

1.3 Ignition

After having carried out the preliminary checks, perform the

following to start the boiler:

–set the main system switch to "ON" in order for the display to

show the pressure level in the system during reﬁlling

–

make sure that the operating mode is set to "Stand-by";

if this is

not the case, press the button y until "Stand-by" mode has

been selected

Fig. 3

–on the display (1), check that the heating system pressure

when cold is

1-1.2 bar (100-120 kPa)

. Otherwise, open the ﬁll-

ing valve, which is to be prearranged on the system return,

and ﬁll until a pressure of

1-1.2 bar (100-120 kPa)

is shown on

the display (1)

–close the ﬁlling valve

Fig. 4

–select the "WINTER" l operating mode by pressing the

ybutton twice. the value of the delivery sensor detected at

that moment will appear on the display

–set the room thermostat to the required temperature, or if

the system is equipped with a timed programmer or external

temperature controller, check that this is ON and set accord-

ingly.

1.4 Adjusting the heating temperature

If the heating temperature is to be increased or decreased,

press the buttont followed by the buttons > or < until the de-

sired temperature is reached. The temperature can be set to

between 20 and 80°C.

1.5 Fault / malfunction codes

If a fault/malfunction is detected during boiler operation, the

message

"ALL"

will appear on the display followed by the fault

code.

If you see alarm

“02”

(low water pressure in the system):

–on the display (1), check that the heating system pressure

when cold is

1-1.2 bar (100-120 kPa)

. Otherwise, open the ﬁll-

ing valve, which is to be prearranged on the system return,

and ﬁll until a pressure of

1-1.2 bar (100-120 kPa)

is shown on

the display (1)

–press and hold the button y for more than 3 seconds and

check whether normal operating conditions are restored

–close the ﬁlling valve

Fig. 5

If you see alarm

“06”

(no ﬂame detected) and

“07”

(safety ther-

mostat intervention):

–press and hold the button y for more than 3 seconds and

check whether normal operating conditions are restored.

If this operation is not successful,

ONLY ONE MORE ATTEMPT

can

be made, therefore:

–close the gas isolation valve

–set the main system switch to "OFF"

–contact the Qualiﬁed Technical Personnel.

OFF

Fig. 6

m

CAUTION

Should you see an alarm not described here, contact a

qualiﬁed technical professional.

2SHUTDOWN

2.1 Temporary shutdown

If the user wishes to interrupt boiler operation, press and hold

the button y for at least one second, once if in "WINTER

mode" n or twice if in "SUMMER mode" l.

"- -"

will appear on the display.

f

ELECTRICAL HAZARD

The boiler will still be powered.

If the user is away temporarily, for a weekend, short trip etc and

if the outside temperature is at ZERO:

–press and hold the button y once if in "WINTER mode" n or

twice if in "SUMMER mode" l to put the boiler into stand-by

–set the main system switch to "OFF"

–close the gas valve.

OFF

Fig. 7

m

CAUTION

If the outside temperature might fall below ZERO,

since the appliance is equipped with an "antifreeze

function" and the "anti-freeze kit to -15°C":

–PUT THE BOILER INTO STAND-BY

–leave the main system switch set to "ON" (boiler is

powered)

–leave the gas valve open.

2.2 Shutting down for long periods

If the boiler is to be left unused for a long period, the following

operations need to be carried out:

–press and hold the button y for at least 1 second, once if in

"WINTER mode" n or twice if in "SUMMER mode" l to put

the boiler into stand-by

"- -"

will appear on the display

–set the main system switch to "OFF"

OFF

Fig. 8

–close the gas valve

–close the heating system isolation valves

–drain the heating system if there is the risk of freezing.

m

CAUTION

Contact the Qualiﬁed Technical Personnel if the pro-

cedure described above cannot be easily carried out.

3MAINTENANCE

3.1 Adjustments

For the appliance to operate correctly and efﬁciently it is recom-

mended that the User calls upon the services of a Professionally

Qualiﬁed Technician to carry out

BI-ANNUAL

maintenance.

m

CAUTION

Maintenance interventions must ONLY be carried out

by professionally qualiﬁed personnel who will follow

the indications authorised in the INSTALLATION AND

MAINTENANCE INSTRUCTIONS.

3.2 External cleaning

a

WARNING

–Should it be necessary to access the areas in the

bottom part of the appliance, make sure that the

system components and pipes are not hot (risk of

burning).

–Before performing any maintenance, put on protec-

tive gloves.

3.2.1 Cleaning the cladding

When cleaning the cladding, use a cloth dampened with soap

and water or alcohol for stubborn marks.

d

IT IS FORBIDDEN

to use abrasive products.

4DISPOSAL

4.1 Disposal of the equipment (European Di-

rective 2012/19/EU)

At the end of their life span, the appliance

and electrical and electronic devices coming

from households or classiﬁable as household

waste must be delivered to appropriate waste

collection systems, in accordance with the law

and with Directive 2012/19/EU. This product

was designed and manufactured for minimis-

ing its impact on the environment and on hu-

man health, but it contains components that

could be detrimental if managed improperly.

The symbol (crossed-out wheelie bin) depict-

ed here and also appearing on your appliance

means that the appliance at the end of its life

must be managed in accordance with the law

and treated as electrical and electronic waste.

Before delivering the appliance for its disposal,

consult the applicable provisions of the laws in

force in the country where the appliance is used

and get information on the authorised waste

disposal facilities by contacting the relevant lo-

cal ofﬁces.

d

IT IS FORBIDDEN

dispose of the product with urban waste.

5HANDOVER INSTRUCTIONS

N° Description



When done

1Fill in all the details on this Boiler manual.

2Instruct the end user on how to correctly operate the system. Including how to turn the system on and

off, adjust the time and temperature settings.

3 Instruct how to turn theheating system off in summer and on for winter.

4Show end user how to locate all major components and ensure they understand their functions.

Explain how to check them and turn them on or off. Teach simple fault resolution.

5 Instruct how to check for air in a radiator, and bleed it from the system. Provide a bleed key.

6Turn ONgas, bleed air out at the isolation valve unions. Reseal and check for gas leaks.

Turn gas OFF.

7 Outline the importance of the below SERVICE RECORDS, and instruct to keep them safe & accessible.

8Recommend that the boiler be serviced at/before the start of winter every year, and that the heat

exchangerbe ﬂushed at every service.

For any needs please contact Reece Customer Care 1800 080 055 or customercare@reece.com.au.

6SERVICE RECORDS

Service – 1 – Year 1

Date

Service technician

Name

PIC Licence No.

Service Company

Contact phone number

Work Completed

Notes

Andere Handbücher für BRAVA SLIM 30 BFR

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sime Kessel Handbücher

Sime

Sime 30 PC Bedienungsanleitung

Sime

Sime MURELLE Benutzerhandbuch

Sime

Sime MERIDIAN HE 30 C Benutzerhandbuch

Sime

Sime ESTELLE HE 3 ErP Bedienungsanleitung

Sime

Sime Planet Series Bedienungsanleitung

Sime

Sime Murelle Green Planet 110 HE I Betriebsanleitung

Sime

Sime MURELLE EV 25/55 OF Bedienungsanleitung

Sime

Sime RX 26 BF Bedienungsanleitung

Sime

Sime SOLIDA 8 PL Bedienungsanleitung

Sime

Sime AQUA 25 ErP Bedienungsanleitung

Sime

Sime RMG Mk.II Series Bedienungsanleitung

Sime

Sime Brava Slim Series Bedienungsanleitung

Sime

Sime murelle HE 35 R Handbuch

Sime

Sime RMG 70 P Bedienungsanleitung

Sime

Sime Format.zip 25 OF Bedienungsanleitung

Sime

Sime murelle HE 35 R Benutzerhandbuch

Sime

Sime BRAVA ONE 18-25 BF Handbuch

Sime

Sime MURELLE HE 25 BF Bedienungsanleitung

Sime

Sime MURELLE EQUIPE 100 BOX ErP Handbuch

Sime

Sime SOLO 20 Bedienungsanleitung

Sime

Sime 1R Series Bedienungsanleitung

Sime

Sime ECOMFORT PLUS 25 HE Bedienungsanleitung

Sime

Sime ESTELLE HE 3 ErP Handbuch

Sime

Sime 300/5.44 S Benutzerhandbuch

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 Leitfaden

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung