Simons Voss Technologies Padlock Bedienungsanleitung

Padlock

Manual

04.01.2021

Content

1 General information .................................................................................................................................. 3

2 General safety instructions.....................................................................................................................4

3 Product specific safety notices ............................................................................................................. 7

4 Operating the SL version .........................................................................................................................8

5 Operating the ML version ........................................................................................................................9

6 Audible signals.......................................................................................................................................... 10

7 Battery warnings for active version......................................................................................................11

8 Battery replacement (Passive) SC version ......................................................................................13

9 Maintenance, cleaning and disinfection............................................................................................15

10 Technical specifications ........................................................................................................................ 16

10.1 Dimensional drawings padlocks..............................................................................................................17

11 Declaration of conformity ......................................................................................................................21

12 Help and other information ..................................................................................................................22

Padlock (Manual) Content

2 / 24

1 General information

The digital padlock is used to lock doors or other entrances or access

points. The padlock may only be used for this specific purpose.

When installing the digital padlock, ensure that there are no sources of

interference in the surrounding area.

You must not strike the thumb-turn during installation.

The thumb-turn is locked into place with a bayonet mount.

The padlock is supplied ready for installation.

Programme padlocks before installing. Use the SmartIntego software to

programme them.

Important: The batteries are already installed before delivery.

Padlock (Manual) 1. General information

3 / 24

2 General safety instructions

Signal word (ANSI

Z535.6) Possible immediate effects of non-compliance

DANGER Death or serious injury (likely)

WARNING Death or serious injury (possible, but unlikely)

CAUTION Minor injury

IMPORTANT Property damage or malfunction

NOTE Low or none

WARNING

Blocked access

Access through a door may stay blocked due to incorrectly fitted and/or in-

correctly programmed components. SimonsVoss Technologies GmbH is

not liable for the consequences of blocked access such as access to in-

jured or endangered persons, material damage or other damage!

Blocked access through manipulation of the product

If you change the product on your own, malfunctions can occur and access through a door can

be blocked.

Modify the product only when needed and only in the manner described in the

documentation.

Do not swallow battery. Danger of burns from hazardous substances

This product contains lithium button cell batteries. Swallowing the button cell battery, in can

result in severe internal burns leading to death in as little as two hours.

1. Keep new and used batteries away from children.

2. If the battery compartment does not close securely, cease using the product and keep it

away from children.

3. If you think batteries have been swallowed or are in any part of the body, seek medical

attention immediately.

Risk of explosion due to incorrect battery type

Inserting the wrong type of battery can cause an explosion.

Only use the batteries specified in the technical data.

Padlock (Manual) 2. General safety instructions

4 / 24

CAUTION

Fire hazard posed by batteries

The batteries used may pose a fire or burn hazard if handled incorrectly.

1. Do not try to charge, open, heat or burn the batteries.

2. Do not short-circuit the batteries.

IMPORTANT

Damage resulting from electrostatic discharge (ESD)

This product contains electronic components that may be damaged by electrostatic discharges.

1. Use ESD-compliant working materials (e.g. Grounding strap).

2. Ground yourself before carrying out any work that could bring you into contact with the

electronics. For this purpose, touch earthed metallic surfaces (e.g. door frames, water pipes

or heating valves).

Damage resulting from liquids

This product contains electronic components that may be damaged by liquids of any kind.

Keep liquids away from the electronics.

Damage resulting from aggressive cleaning agents

The surface of this product may be damaged as a result of the use of unsuitable cleaning agents.

Only use cleaning agents that are suitable for plastic or metal surfaces.

Damage as a result of mechanical impact

This product contains electronic components that may be damaged by mechanical impacts of

any kind.

1. Avoid touching the electronics.

2. Avoid other mechanical influences on the electronics.

Damage due to polarity reversal

This product contains electronic components that may be damaged by reverse polarity of the

power source.

Do not reverse the polarity of the voltage source (batteries or mains adapters).

Operational malfunction due to radio interference

This product may be affected by electromagnetic or magnetic interference.

Do not mount or place the product directly next to devices that could cause electromagnetic

or magnetic interference (switching power supplies!).

Padlock (Manual) 2. General safety instructions

5 / 24

Communication interference due to metallic surfaces

This product communicates wirelessly. Metallic surfaces can greatly reduce the range of the

product.

Do not mount or place the product on or near metallic surfaces.

NOTE

Intended use

SimonsVoss-products are designed exclusively for opening and closing

doors and similar objects.

Do not use SimonsVoss products for any other purposes.

Malfunctions due to poor contact or different discharge

Contact surfaces that are too small/contaminated or different discharged batteries can lead to

malfunctions.

1. Only use batteries that are approved by SimonsVoss.

2. Do not touch the contacts of the new batteries with your hands.

3. Use clean and grease-free gloves.

4. Always replace all batteries at the same time.

Different times for G2 locks

The internal time unit of the G2 locks has a technical tolerance of up to ± 15 minutes per year.

Qualifications required

The installation and commissioning requires specialized knowledge.

Only trained personnel may install and commission the product.

Incorrect installation

SimonsVoss Technologies GmbH accepts no liability for damage caused to doors or compon-

ents due to incorrect fitting or installation.

Modifications or further technical developments cannot be excluded and may be implemented

without notice.

The German language version is the original instruction manual. Other languages (drafting in the

contract language) are translations of the original instructions.

Read and follow all installation, installation, and commissioning instructions. Pass these instruc-

tions and any maintenance instructions to the user.

Padlock (Manual) 2. General safety instructions

6 / 24

3 Product specific safety notices

IMPORTANT

Damage caused by moisture in outdoor use

Moisture can damage the electronics.

1. If you want to use the locking cylinder for outdoor applications or in high

humidity (bathrooms or washrooms), use the WP version.

2. Carefully insert the locking cylinder to avoid damaging the O-rings.

NOTE

Length of locking system password

For security reasons, the locking system password must consist of at least

8 characters. The code length for digital closing cylinders

(and for System

3060/3061 and MobileKey)

corresponds to 2168 Bit.

Battery changes may only be carried out by trained personnel and only with the intended battery

key (Z4.SCHLUESSEL)!

Programming with obsolete LSM version

New components can only be programmed with the current version of LSM.

Padlock (Manual) 3. Product specific safety notices

7 / 24

4 Operating the SL version

Opening

Active: Activate the transponder within the thumb-turn’s

communication range or

(Passive) SC: Hold the smart card or smart tag in front of the reader

thumb-turn.

You can open the padlock by turning the thumb-turn about 30° in a

clockwise direction until it will go no further and the shackle opens.

Locking

Close shackle; the shackle always locks into place automatically.

Always check that it has locked properly.

Padlock (Manual) 4. Operating the SL version

8 / 24

5 Operating the ML version

Opening

Active: Activate the transponder within the thumb-turn’s

communication range or

(Passive) SC: Hold the smart card or smart tag in front of the reader

thumb-turn.

You can open the padlock by turning the thumb-turn about 30° in a

clockwise direction until it will go no further and the shackle opens.

Locking

Close shackle.

Active: Activate the transponder within the thumb-turn’s

communication range or

(Passive) SC: Hold the smart card in front of the reader thumb-turn.

You can open the padlock by turning the thumb-turn about 30° in an

anti-clockwise direction until it will go no further.

Always check that it has locked properly.

Padlock (Manual) 5. Operating the ML version

9 / 24

6 Audible signals

Active version

2 short audible signals before engaging and a short signal after

disengaging indicate normal operation.

Battery Warning Level 1: 8 short audible signals before engaging.

Batteries will soon be empty. Replace batteries in the padlock.

Battery Warning Level 2: 8 short audible signals for 30 seconds with a

one-second break between each signal. Indicates emergency battery

warning: Batteries are almost completely empty. Replace batteries in

the padlock immediately.

8 short audible signals after disengaging indicate that the transponder

battery is empty. Have transponder battery replaced

(Passive) SC version

2 short audible signals + LED flashes blue twice briefly before engaging

and a short audible signal after disengaging: indicates normal activation.

Battery Warning Level 1: 8 short audible signals + LED flashing red

briefly 8x before engaging. Batteries will soon be empty. Replace

batteries in the padlock.

Battery Warning Level 2: 8 short audible signals for 30 seconds + LED

flashes red briefly twice with a one-second break between each signal.

Indicates emergency battery warning: Batteries are almost completely

empty. Replace batteries in the padlock immediately.

8 short audible signals after disengaging indicate that the transponder

battery is empty. Have transponder battery replaced.

After Battery Warning Level 2 is emitted for the first time, it is still possible

Active padlock: about 50 opening transactions are carried out.

(Passive) padlock: about 200 opening transactions are carried out.

After reaching this number of opening transactions or after about 4 weeks

(active) / about 2 weeks (passive/SC), the padlock automatically switches

G1: emergency battery storage mode

G2: freeze mode

Once this warning level is reached, only the locking system administrator is

able to gain access. User transponders are no longer accepted (consult

'Battery warnings' in the locking cylinder manual for more detailed

information).

Padlock (Manual) 6. Audible signals

10 / 24

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Simons Voss Technologies Sperren Handbücher

Simons Voss Technologies

Simons Voss Technologies PinCode-Tastatur Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies PinCode keypad Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies Cylinder AX Modularity Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies SmartLocker AX Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies PegaSys 2.1 Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies SI SmartLocker AX Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies LockNode MP Z4 Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies VdS Block lock Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies LockNode SREL2.G2 Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies Cylinder AX Z5 LockNode Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies SmartLocker AX Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies SmartIntego PadLock AX Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies MK.CD.STARTER Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies Cylinder AX LockNode Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies LockNode MP Z4 Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies ALLEGION 3061 Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies TN4 Handbuch

Simons Voss Technologies

Simons Voss Technologies SmartHandle Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies LockNode Z4 Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies ALLEGION 3060 Series Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies Cylinder AX Z5 LockNode Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies SmartStick AX Bedienungsanleitung

Simons Voss Technologies

Simons Voss Technologies SmartHandle WP Handbuch

Simons Voss Technologies

Simons Voss Technologies Cylinder AX Modularity Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung