EN
Product range 3
The illustrations are symbolic and may deviate from the respective product.
Subject to technical modifications and errors.
1. Product description
Secos is a highly innovative control system for surface temperature control where both volume flow and temperature are constantly
measured and optimally controlled. This ensures permanent hydraulic balancing at all times.
1Secos system manifolds
• Supply and return manifolds made of stainless steel 1" female
thread.
• One filling / emptying / flushing / venting device per manifold.
• Pre-assembled snap-on board to accommodate the Secos
actuator.
• Secos multi-sensors mounted and wired at the factory.
• Delivered ready for installation on manifold bracket with sound
insulation.
• Outlets in ¾" Eurocone.
• Including Simplex filling and drainage plugs.
2Secos energy saving controller
• Central core of the Secos Energy Control System.
• Evaluation of the system data and automatic control according
torequirements.
• To control the flow rate as well as the heat output in each circuit.
• Suitable for heating and cooling.
• Bus communication between energy-saving controller and
actuators.
• For up to 8 seperate room thermostats
• Assignment of the room thermostats to Secos actuators possible.
• With building management system connection (Modbus).
• Wireless connection via app Flamconnect.
• External condensation monitor can be connected.
• Valve and pump protection function.
• For all other features see "Functions & Features":
3Secos actuator for ceramic valves
• Low power consumption - consumption only during movement.
• Continuous adjustment with precise position control.
• Prewired plug connection.
• Only 1 plug for all Secos actuators.
• Snap-on: Snap-on technology for mechanical and electrical
connection with just one click for error-free and time-saving
installation.
4Secos mounting bracket
• Manifold bracket including sound insulation.
• Mounting in distribution cabinet or wall mounting.
• Sturdy version made of galvanized steel.
1Product description
1
4
6
2
3
5
7
5Secos multisensor
• For recording the volume flow and return temperature in each
heating circuit.
• No moving elements.
• Minimal pressure loss.
• Zero-flow detection.
• Prewired at the factory.
6Secos supply line temperature sensor
• Recording of the supply line temperature in the system.
• Additional safety device for monitoring the maximum permissible
supply line temperature.
7Secos disc valves
Unlike conventional standard systems with li valves, Secos works
with ceramic disc valves which are actuated by a rotary movement.
The specially designed ceramic discs allow linear valve opening,
which ensures a uniform valve characteristic curve. In conjunction
with the Secos actuators and the infinitely variable valve positions,
this enables very precise control of the volume flows in all heating
circuits.
• Disc valve with trend-setting ceramic technology.
• For heating / cooling applications.
• Wear-resistant.
• Long service life.
• Stepless and precise supply line control in combination
withSecos actuators.
Secos - Simplex Energy Control System
Installation instructions |Operating instructions
