
Page 6
ABOUT THE CHEMCIAL PUMP
The SIMPSON Chemical Pump was designed for everyday pumping of irrigation water,
outdoor standing water (clean, not dirty) and general agricultural/farming pumping of liquid
fertilizers, herbicides and pesticides that have a PH range of 4 to 11.
NEVER use the chemical pump with flammable liquids or corrosive chemicals.
If you are unsure of your application with the chemical pump, have questions about its
assembly or general usage, please contact our customer service at 1-877-362-4271 or
through email: cservice@fna-group.com
Usage of this pump with fertilizer, herbicides and pesticides brings responsibility that cannot
be engineered into the pump. Before using any of these chemicals with the pump, read and
understand all precautions from the chemical manufacturer. Know how to safely handle the
chemicals. Always wear personal protective equipment (PPE) that is instructed by the
chemical manufacturer. Know what to do in case of accidents.
Before using the chemical pump:
- Read and understand this manual, the engine manual and any literature for the chemicals
you will be using with this pump.
- Never use the chemical pump with dry or aerosolized chemicals.
- Know all emergency policies for the chemical being used including who to contact in case
of a spill.
- Keep material safety data sheets (MSDS) for the chemicals being used with the pump for
use by first responders during an accident.
- Avoid coming in contact with the chemicals being pumped. Always wear proper PPE for the
chemical being pumped.
-DO NOT USE this pump to convey fluids intended for human consumption.
- Never use the pump to mix chemicals when inside any structure.
- Always store chemicals in containers that are approved for its containment and
CLEARLY label the containers as to its contents as well as attach MSDS to the container.
- Never use the chemical pump (or allow someone else) when intoxicated, under the
influence of narcotics or tired.
- Never allow children to use this pump. Children, pets and livestock must be removed from
the area of usage. This is vital when using the pump with chemicals.
-DO NOT USE this pump with flammable or corrosive liquids.
-DO NOT USE this pump to convey gasoline, diesel or fuel oil.
- Never use this pump for water that is dirty, muddy, contains trash or is effluent.
- Always clean the pump after each use by draining the pump of chemicals and flushing with
clean water. Always disposed of the chemicals and flushed water responsibly and within all
local, state and federal laws.