Simrad NSS evo2 Bedienungsanleitung

NSS evo2

QuickStart Guide

Font panel

MARK

No. Description

1 Touch screen

2 Rotary knob. Rotate to scroll through menu items, then press to conﬁrm a

selection. Rotate to adjust a value and to zoom a zoomable panel.

3X key. Press once to exit a dialog, to return to previous menu level and to remove

the cursor from the panel.

4 Power key. Press once to display the System control dialog. Repeat short presses

to cycle the backlight brightness. Press and hold to turn the unit ON/OFF.

5 Home key. Press once to display the Home page. Repeat short presses to cycle

the favorite buttons. Press and hold to display all favorite buttons as an overlay

on active page. Repeat short presses to cycle the favorite buttons.

6 STBY / AUTO key. With the autopilot in any automatic mode: Press to set the

autopilot to Standby mode. With the autopilot in Standby mode: Press to display

the autopilot mode selection pop-up.

7 Card reader door

8 Micro-SD Card readers

9 MARK key. Press to instantly save a waypoint at the vessel’s position. Press and

hold to display the Plot menu used for saving new waypoints, routes and tracks.

¼Note: The MARK key is not available on 7” units.

7” units 9”, 12”, 16” units

The System Control dialog

Used for quick access to system settings.

Activate the dialog by:

• pressing the Power key, or by

• swiping from the top of the screen

¼Note: The content of the System Control dialog depends on connected equipment

and active panel.

The Home page

Activate the Home page by pressing the Home key.

23 4 1

Application buttons

Tools

Close button

Favorites

Man Over Board

(MOB) button

You can customize the Home page background by adding your own .png or .jpg ﬁle.

Application pages

Activate an application page by:

• tapping the application button (full page panel), by

• tapping a favorites button, or by

• pressing and holding an application button to select a predeﬁned split page.

Status panel

Application panel

Instrument bar

Adjust panel size

You can adjust the panel sizes in a split page.

1. Tap the adjust split button in the System Control dialog to show the resize icon

2. Drag the resize icon to set preferred panel size

3. Save the changes by tapping the screen.

Favorite page overlay

Display the favorite buttons as a pop-up on any page by pressing and holding the

Home key.

2 s

Edit a favorite page

Enter the Favorites edit mode by:

• tapping the Edit icon, or by

• pressing and holding a favorite button

Edit favorite page

Delete favorite page

Add new favorite page

Edit an existing favorite page or conﬁgure a new page by dragging panel icons into or

out from the preview area.

Save the changes by tapping the Save button.

The Instruments bar

Tap the Instrument bar button in the System Control dialog to turn the

bar on/oﬀ.

To edit the content of the Instrument bar:

1. Tap the Instrument bar to make it active

2. Select the edit option from the menu

3. Tap the item you want to change

4. Select the information you want to display in the Instrument bar

5. Save the changes by selecting the save option in the menu.

Charts

• Zoom the chart by using spread or pinch

gestures, by using the zoom buttons (A), or by

turning the Rotary knob.

• Move the view in any direction by panning the

chart.

• Display information about a chart item by tapping

the item.

Waypoints

Save a waypoint at the vessel’s position by:

• using the new waypoint option in the menu, or by

• pressing the MARK key.

To save a waypoint at selected position:

1. Tap the screen at selected position

2. Select the new waypoint option in the menu, or press the MARK key.

¼Note: The MARK key is not available on 7” units

Routes

To create a route:

1. Tap the screen

2. Select the new route option in the menu

3. Tap the chart to position the ﬁrst routepoint

4. Continue tapping the screen to position additional waypoints

5. Save the route by selecting the save option from the menu.

Navigating

To navigate to cursor position:

1. Tap the screen to positioning the cursor

2. Select the goto cursor option in the menu.

Navigate a predeﬁned route by:

• tapping the route to make it active, then selecting

the goto route option in the menu, or by

• selecting the route from the Routes dialog, then selecting the goto option in the

dialog

Overlay

Add a radar, weather or StructureScan overlay on the chart by selecting the option in

the menu.

Echosounder

• Zoom the image by tapping the zoom

buttons (A) or by turning the Rotary knob.

• View echosounder history by panning the

image.

• Adjust gain and color from the slide bar,

displayed by tapping the gain or color icon

(B), or by pressing the Rotary knob.

• Toggle auto gain on/oﬀ from the menu, or by

pressing and holding the Rotary knob.

Toggle available echosounder frequencies from the menu. Available options depend on

type of transducers connected to the system.

Single

frequency

transducers

50 kHz Lower resolution images. Best performance in deep

water

83 kHz Greater water coverage

200 kHz High resolution images and better target separation

in shallow water

Chirp

transducers

Low CHIRP Lower resolution images. Best performance in deep

water

Medium CHIRP Better depth penetration than High CHIRP, but with

minimal loss of target deﬁnition

High CHIRP High resolution images and better target separation

in shallow water

StructureScan

• Select Downscan or Sidescan view from the

• Zoom the image by tapping the screen

to position the cursor, then tap the zoom

buttons (A) or turn the Rotary knob

• Adjust contrast manually from the slide bar,

displayed by tapping the Contrast icon (B), or

by pressing the Rotary knob

Toggle between available StructureScan frequencies from the menu.

455 kHz Excellent resolution and greater range than 800 kHz

800 kHz Better deﬁnition than 455 kHz at shallower depths

Autopilot

You can activate the autopilot from any panel.

1. Press the STBY/AUTO key or the Autopilot tile in the Instrument bar

2. Select the autopilot mode in the Autopilot pop-up

SStandby Autopilot is passive. Used when manually steering at the

helm

FU Follow-up Manual steering. The rudder angle is set by the Rotary knob

or by another FU unit

NFU Non-Follow-up

Manual steering. The rudder movement is controlled by

the Port and Starboard buttons in the Pilot pop-up, or by

another NFU unit

AAuto Automatic steering, maintaining the set heading

NDNoDrift Automatic steering, keeping the vessel on a straight bearing

line by compensating for drift

NNavigation Automatic steering, navigating the vessel to a speciﬁc

waypoint or through a route using GPS data

WWind * Automatic steering, maintaining the set wind angle

WNWind

navigation *

Automatic steering, navigating the vessel to a speciﬁc

waypoint or through a route using both wind and GPS data

* Only available if the boat type is set to Sailboat.

¼Note: You switch the autopilot to Standby mode from any automatic mode by a

short press on the STBY/AUTO key.

Adjust set heading / course / wind angle

Adjust set heading (Auto mode), set wind angle (Wind mode) and

set course (NoDrift mode) by:

• tapping the Port or Starboard buttons in the autopilot pop-up,

or by

• turning the Rotary knob.

*988-10628-001*

Radar

B• Turn the radar transmitting on/oﬀ from the

menu.

• Set the range by using the zoom icons (A) or

by turning the Rotary knob.

• Adjust gain, sea clutter and rain clutter settings

from the slide bar, displayed by tapping the

settings icons (B), or by pressing the Rotary

knob.

Audio

Activate the Audio overlay by tapping the Audio tile in the Instrument bar.

Positioning a MOB mark

Save a Man Over Board (MOB) mark at vessel position by tapping the MOB button on

the Home page.

For more details, see the

NSS evo2 Operator manual.

Andere Handbücher für NSS evo2

Inhaltsverzeichnis

Andere Simrad GPS Handbücher

Simrad

Simrad CP54 Bedienungsanleitung

Simrad

Simrad ce32 mkii Bedienungsanleitung

Simrad

Simrad CP33 Bedienungsanleitung

Simrad

Simrad NSX Bedienungsanleitung

Simrad

Simrad CP42 Bedienungsanleitung

Simrad

Simrad GO XSE Bedienungsanleitung

Simrad

Simrad CA42 Bedienungsanleitung

Simrad

Simrad Shipmate GN30 mkII Bedienungsanleitung

Simrad

Simrad MX525A Bedienungsanleitung

Simrad

Simrad CP34 Bedienungsanleitung

Simrad

Simrad NSS evo2 Bedienungsanleitung

Simrad

Simrad GO XSE Bedienungsanleitung

Simrad

Simrad GO7 Bedienungsanleitung

Simrad

Simrad NSS16 EVO3S Bedienungsanleitung

Simrad

Simrad GO7 Bedienungsanleitung

Simrad

Simrad NSO evo3S MPU Bedienungsanleitung

Simrad

Simrad GO XSE Bedienungsanleitung

Simrad

Simrad CX34 NavStation Bedienungsanleitung

Simrad

Simrad NSE8 Bedienungsanleitung

Simrad

Simrad GN33 Bedienungsanleitung

Simrad

Simrad NSS Series Bedienungsanleitung

Simrad

Simrad GO XSE Bedienungsanleitung

Simrad

Simrad Shipmate CP30 Bedienungsanleitung

Simrad

Simrad CS66 Bedienungsanleitung

Beliebte GPS Handbücher anderer Marken

Hama

Hama 53118 Bedienungsanleitung

Garmin

Garmin SOUNDER 125 Bedienungsanleitung

Garmin

Garmin DEZL 580 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Garmin

Garmin ECHOMAP PLUS Bedienungsanleitung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Garmin

Garmin 15 H Series Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

Garmin

Garmin DEZL OTR500 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung

Garmin

Garmin GPSMAP 78 series Bedienungsanleitung