2 | Preface | IS40 PRO Operator Manual
The Wheelmark
The IS40 PRO indicator system is produced and tested in accordance
with the European Marine Equipment Directive 96/98. This
means that the systems comply with the highest level of tests for
nonmilitary marine electronic navigation equipment existing today.
The Marine Equipment Directive 96/98/EC (MED), as amended by
98/95/EC for ships flying EU or EFTA flags, applies to all new ships, to
existing ships not previously carrying such equipment, and to ships
having their equipment replaced.
This means that all system components covered by annex A1 must
be type-approved accordingly and must carry the Wheelmark,
which is a symbol of conformity with the Marine Equipment
Directive.
Navico has no responsibility for incorrect installation or use of the
system, so it is essential for the person in charge of the installation
to be familiar with the relevant requirements as well as with the
contents of the manuals, which covers correct installation and use.
Copyright
Copyright © 2015 Navico Holding AS.
Warranty
The warranty card is supplied as a separate document.
In case of any queries, refer to our website:
pro.simrad-yachting.com
About this manual
This manual is a reference guide for operating the Simrad IS40
PRO indicator system. The manual will be continuously updated to
match new sw releases. The latest available manual version can be
downloaded from our web sites.
Important text that requires special attention from the reader is
emphasized as follows:
¼Note: Used to draw the reader’s attention to a comment or some
important information.
Warning: Used when it is necessary to warn personnel that
they should proceed carefully to prevent risk of injury and/or
damage to equipment/personnel.
