8. Replacing Batteries Of Remote Controller
(1) Always use new batteries when replacing the old set.
(2) Do not attempt to charge, short-circuit, disassemble, hurt or
burn used batteries.
(3) Battery replacement is necessary when remote controller acts
sporadically or stops on the remote controller
(4) Do not drop, apply shock or stop on the remote controller
(5) Do not spill water on the remote controller
(6) Do not place objects between the remote controller and
remote control receiver.
(7) Do not use remote controller for other equipment at the same
time.
(8) If the monitor does not operate even when operating the
remote controller from a close range, it is time to replace the
batteries (products number: RC2025), Refer to the label on
back of the Basic Controller.
-18-
2.Specification
-3-
10.2-INCH TFT LCD COLOR VIDEO MONITOR
Resolution 800(V) x 3(RGB) x 480(H)
Display Size 10.2 Inch TFT LCD
Brightness Model 1: 400cd/m2
Model 2: 800 cd/m2
Contrast Ratio 300:1
Drive System Active Matrix
Back Light LED
Video Input Composite Video Signal 1 Vpp 75Ω
Video Input System NTSC/PAL/SECAM Auto Switching
Dot Pitch 0.0925(H) x 0.276(V)
Viewing Angle L/R: 65 T: 45 D: 65
Power Source DC 9 - 26V or 9 - 36V
Power Consumption 650mA/DC12V (max)
Operation Temperature -30℃ to +85℃
Storage Temperature -30℃ to +85℃
Monitor Dimensions 251.5(L) x176 (H) x 27.5(W) mm
