Siro SI1605 Bedienungsanleitung

Unidirectional 5-Channel Radio-Handheld Transmitter

with integrated timer

SI1605

Compatible with unidirectional SIRO drives:

ERB15-LE

EYA25-LE

06-2020

1. Functional overview

The remote control SI1605 is a radio transmitter with integrated timer. You can use the transmitter to

remotely control drives and radio receivers of the unidirectional LE-series from SIRO either manually or

automatically with a program.

The SI1605 remote controller has 5 radio channels with which the motors or radio receivers

can be controlled individually or combined into several groups.

Furthermore, the handheld transmitter SI1605 has three different modes:

Manual Mode ( ): Normal remote controller without the time switch function

Automatic Mode ( ): Remote controller with timer function (main mode)

Random Mode ( ): In this mode, your settings are executed 15 minutes before or after

the specified time. Example: You have set the driveway to 10.00 hours. This way your shading

system will randomly drive up at 9.45 or 10.15.

Use the mode button (see figure) to select the respective mode.

2. Installation

The remote controller SIS1605 requires a battery cell type CR2450 –3V as power source. To

ensure that the device can execute all commands, it is recommended to replace empty batteries

in time.

1. Open the battery compartment of the remote controller on the back by sliding the cover down.

2. Insert the battery into the battery compartment with the plus pole facing upwards.

3. Close the battery compartment.

3. Setting the weekday and time (only in manual mode)

During the setting mode, you always have 60 seconds time between each action. If no activity

is performed during this period, the unit automatically returns to the operation mode.

However, you can exit the setting mode at any time without saving any settings.

The weekdays are displayed in English:

Mo: Monday Tu: Tuesday We: Wednesday

Th: Thursday Fr: Friday Sa: Saturday

Su: Sunday

1. To change into MAN-

Mode, press and hold

the mode button.

2. Press and hold the time

button for 3 seconds. The hour

display will now flash.

3. Press the up or down

button to set the current

hour. Example here: 11

4. Press the P1 + button to

confirm. The minute display will

now flash.

5. Press the up or down button to

set the current number of minutes.

Example here: 11:01

6. Press the P1 + button

again to confirm. The weekday

display will now flash.

7. Enter the current day by

pressing the up or down

button. Example here:

Monday

8. Press and hold the time button for 3

seconds to save the setting. For final

confirmation press the time button again

briefly.

4. Herstellung der Verbindung zwischen Antrieb und Sender

Before the SI1605 remote controller can control one or more drives, the connection

between the devices must be established. First select a channel on the SI1605 remote

controller that is to be used to control one or a group of drives. Make sure that the

remote controller is in manual mode.

Please refer to the operation instructions of the LE-series drive you have received for the procedure of

teaching-in and end position setting.

5. Setting the roll up and down times

If the set time shows "--:--", it means that on this day of the week and in this channel no

timer function is set.

1. Switch to the

AUTO mode

using the mode

button.

2. Press and hold the time

button for 3 seconds to

display the time status. By

pressing the up and down

button, the set time of each

day is displayed.

4. Press the up or

down button to set

the hours (roll up).

5. Press the P1 +

Taste to set the

minutes (roll up).

The minute display

flashes.

6. Press the up or

down button to set

the minutes (roll up).

8. You can now set the

hours of the roll-down

time by pressing the

up or down button.

3. Press the time

button. The hour

display flashes. You

can now set the roll-

up time.

7. Press the mode

button to confirm the

setting. You will now be

taken to the setting of the

roll-down time.

6. Bug fixing

Problem

Possible cause

Solution

The device does not

work

The battery is incorrectly

inserted or empty.

Check that the battery is inserted

correctly. Replace the battery if

necessary.

The drive cannot be

moved up / down

manually.

Automatic mode is active.

Press the time button to switch to

manual mode. Manual appears in the

display.

The drive does not move

up / down at the set

time.

Manual mode is active.

Press the time button to switch to

automatic mode. Auto appears in the

display.

7. Technical data

Technical data

Power supply:

3 Volt

Battery type:

CR2450

Working current:

≤12mA

Protection class:

IP 20

Operating temperature:

-5°C to +40°C

Radio coding:

Rolling Code

Radio frequency:

433.92 MHz

Transmitter power:

5mW

Channels:

Compatibility:

SIRO LE Series

Check that you have received the correct device before commissioning. Also compare the frequency

information on the motor or controller nameplate.

9. Press the P1

+ Taste to set

the minutes (roll

down).

11. Press the time button to confirm the roll-down

time. The display changes and now shows Monday (Mo)

with the roll-up symbol. The hours flash. After you have

carried out the up and down times for the whole week in

sequence, press the time button for 3 seconds. The

hours and minutes display flashes. Your setting has now

been saved. You will automatically leave the setting

mode.

10. Press the up

or down button

to set the minutes

(roll down).

8. Warranty conditions

SIRO Antriebs- und Steuerungstechnik offers a 2-year warranty on new drives that have been

professionally installed and properly operated in accordance with the installation instructions. The

warranty covers all design faults, material defects and manufacturing faults.

Any defects occurring within the warranty period will be remedied by SIRO free of charge by supplying

an equivalent or new product. Replacement delivery for warranty reasons does not result in general

extensions of the original warranty period.

Any claims for compensation beyond this are excluded.

SIRO Antriebs- und

Steuerungstechnik GmbH

Eurode - Park 1-27

D-52134 Herzogenrath

Germany

Inhaltsverzeichnis

Andere Siro Sender Handbücher

Siro

Siro BF315 Bedienungsanleitung

Siro

Siro SIS1605 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung