2 Safety information Sirona Dental Systems GmbH
2.4 Modifications and extensions of the system Operating Instructions 22" Monitor
65 38 297 D3655
8D3637.201.02.01.02
2.4 Modifications and extensions of the system
Modifications to this system which might affect the safety of the system owner,
patients or other persons are prohibited by law.
For reasons of product safety, this product may be operated only with original
Sirona accessories or third-party accessories expressly approved by Sirona.
The user assumes the risk of using non-approved accessories.
If any devices not approved by Sirona are connected, they must comply with
the applicable standards, e.g.:
●IEC 60950-1 for information technology equipment (e.g. PC) and
●IEC 60601-1 for medical electrical equipment.
The loudspeaker port of the monitor may be connected only to a device that
complies with IEC 60950 (e.g. a PC) or
IEC 60601-1. Under no circumstances may it be connected to a stereo sys-
tem, or similar, for example.
If a system is created during the installation process, the requirements of IEC
60601-1, 3rd edition, must be fulfilled.
2.5 Danger of electric shock
To prevent the danger of fire or of electric shock, the product must not be
exposed to rain or moisture.
Please do not open or dismantle the unit, as otherwise there will be a risk of
electric shock.
2.6 Electromagnetic compatibility
Medical electrical equipment is subject to special precautionary measures with
regard to electromagnetic compatibility (EMC). It must be installed and oper-
ated in compliance with the specifications provided for the respective treat-
ment center in the document "Installation Requirements".
Portable and mobile RF communications equipment may interfere with medi-
cal electrical equipment. Therefore, the use of mobile wireless phones in med-
ical office or hospital environments must be prohibited.
To ensure safe operation from the standpoint of EMC, please observe the
chapter entitled "Electromagnetic compatibility" in the document "Installation
Requirements".
2.7 Dismantling/Installation
Follow the installation instructions
When dismantling and reinstalling the unit, proceed according to the installa-
tion instructions for new installation in order to guarantee its proper functioning
and stability.
Explosion-hazard areas
This unit must not be used in areas subject to explosion hazards.